u-boot/arch/arm
York Sun f539c8a4a7 armv8: ls2080a: Drop early MMU for SPL build
Early MMU improves performance especially on emulators. However, the
early MMU is left enabled after the first stage of SPL boot. Instead
of flushing D-cache and dealing with re-enabling MMU for the second
stage U-Boot, disabling it for SPL build simplifies the process. The
performance penalty is unnoticeable on the real hardware. As of now,
SPL boot is not supported by existing emulators. So this should have
no impact on emulators.

Signed-off-by: York Sun <york.sun@nxp.com>
2017-03-14 08:44:03 -07:00
..
cpu armv8: ls2080a: Drop early MMU for SPL build 2017-03-14 08:44:03 -07:00
dts ARM: dts: uniphier: drop u-boot, dm-pre-reloc from system-bus pinctrl node 2017-02-23 08:37:56 +09:00
imx-common Freescale/NXP: Migrate CONFIG_FSL_CAAM to defconfigs 2017-03-09 11:37:24 -05:00
include armv8: layerscape: Rewrite memory reservation 2017-03-14 08:44:03 -07:00
lib do_smhload: fix return code 2017-03-09 19:52:14 -05:00
mach-aspeed dm: core: Replace of_offset with accessor 2017-02-08 06:12:14 -07:00
mach-at91 Convert CONFIG_BOARD_EARLY_INIT_F to Kconfig 2017-01-25 17:38:32 -05:00
mach-bcm283x ARM: bcm283x: Implement EFI RTS reset_system 2016-11-28 20:15:19 -05:00
mach-davinci Kconfig: Migrate BOARD_LATE_INIT to a select 2017-01-24 10:35:54 -05:00
mach-exynos ARM: Migrate errata to Kconfig 2017-03-09 19:52:50 -05:00
mach-highbank ARM: highbank: move SoC sources to mach-highbank 2015-02-21 08:23:51 -05:00
mach-integrator integrator: switch to DM serial port 2015-08-12 20:47:49 -04:00
mach-keystone ARM: K2G: DDR3: Fix up priv ID for MPU 2016-12-03 13:21:10 -05:00
mach-kirkwood Kconfig: Migrate BOARD_LATE_INIT to a select 2017-01-24 10:35:54 -05:00
mach-meson arm: Disable HVC PSCI calls by default 2016-10-18 09:08:08 +02:00
mach-mvebu arm: mvebu: Implement secure boot 2017-02-01 09:04:18 +01:00
mach-omap2 arm: omap-common: Fix typo in CONFIG_OMAP54XX guard 2017-03-11 22:30:29 -05:00
mach-orion5x Use correct spelling of "U-Boot" 2016-02-06 12:00:59 +01:00
mach-rmobile armv8: aarch64: Fix the warning about x1-x3 nonzero issue 2017-01-18 09:29:33 -08:00
mach-rockchip rockchip: rename miniarm to tinker board 2017-02-09 12:10:59 -07:00
mach-s5pc1xx arm: s5pc1xx: move SoC to mach-s5pc1xx 2015-11-30 17:17:01 +09:00
mach-snapdragon drivers/sysreset: group sysreset drivers 2016-08-12 09:22:17 -04:00
mach-socfpga SPL: add support to boot from a partition type 2017-02-17 14:15:14 -05:00
mach-stm32 ARM: SPI: stm32: add stm32f746 qspi driver 2017-01-28 14:04:50 -05:00
mach-sunxi sunxi: A64: enable SPL 2017-01-04 16:37:43 +01:00
mach-tegra ARM: Migrate errata to Kconfig 2017-03-09 19:52:50 -05:00
mach-uniphier ARM: uniphier: set up charge pump current for MPLL of LD11 SoC 2017-02-23 09:00:16 +09:00
mach-versatile arm: Remove versatileab board 2015-09-11 15:01:25 -04:00
mach-zynq mmc: zynq: rename CONFIG_ZYNQ_SDHCI to CONFIG_MMC_SDHCI_ZYNQ 2017-01-31 21:50:47 +09:00
thumb1/include/asm/proc-armv arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD 2015-11-10 15:03:48 +01:00
config.mk ARMv8: Add secure sections for PSCI text and data 2016-12-15 11:57:25 -08:00
Kconfig ARM: Migrate errata to Kconfig 2017-03-09 19:52:50 -05:00
Kconfig.debug arm: debug: add Kconfig entries for lowlevel debug 2014-10-26 22:23:12 +01:00
Makefile Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2017-02-01 16:34:25 -05:00