u-boot/drivers/usb/dwc3/samsung_usb_phy.c
Lukasz Majewski a272c99d30 samsung: usb: phy: Support for DWC3 PHY
New files, namely samsung_usb_phy.c and samsung-usb-phy-uboot.h have
been added to u-boot to provide proper PHY handling at Exynos5 SoCs.

This code is used thereafter in the board_usb_init() call.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Marek Vasut <marex@denx.de>
2015-06-08 15:25:44 +02:00

78 lines
2 KiB
C

/**
* samsung_usb_phy.c - DesignWare USB3 (DWC3) PHY handling file
*
* Copyright (C) 2015 Samsung Electronics
*
* Author: Joonyoung Shim <jy0922.shim@samsung.com>
*
* SPDX-License-Identifier: GPL-2.0
*/
#include <common.h>
#include <asm/arch/power.h>
#include <asm/arch/xhci-exynos.h>
void exynos5_usb3_phy_init(struct exynos_usb3_phy *phy)
{
u32 reg;
/* Reset USB 3.0 PHY */
writel(0x0, &phy->phy_reg0);
clrbits_le32(&phy->phy_param0,
/* Select PHY CLK source */
PHYPARAM0_REF_USE_PAD |
/* Set Loss-of-Signal Detector sensitivity */
PHYPARAM0_REF_LOSLEVEL_MASK);
setbits_le32(&phy->phy_param0, PHYPARAM0_REF_LOSLEVEL);
writel(0x0, &phy->phy_resume);
/*
* Setting the Frame length Adj value[6:1] to default 0x20
* See xHCI 1.0 spec, 5.2.4
*/
setbits_le32(&phy->link_system,
LINKSYSTEM_XHCI_VERSION_CONTROL |
LINKSYSTEM_FLADJ(0x20));
/* Set Tx De-Emphasis level */
clrbits_le32(&phy->phy_param1, PHYPARAM1_PCS_TXDEEMPH_MASK);
setbits_le32(&phy->phy_param1, PHYPARAM1_PCS_TXDEEMPH);
setbits_le32(&phy->phy_batchg, PHYBATCHG_UTMI_CLKSEL);
/* PHYTEST POWERDOWN Control */
clrbits_le32(&phy->phy_test,
PHYTEST_POWERDOWN_SSP |
PHYTEST_POWERDOWN_HSP);
/* UTMI Power Control */
writel(PHYUTMI_OTGDISABLE, &phy->phy_utmi);
/* Use core clock from main PLL */
reg = PHYCLKRST_REFCLKSEL_EXT_REFCLK |
/* Default 24Mhz crystal clock */
PHYCLKRST_FSEL(FSEL_CLKSEL_24M) |
PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF |
PHYCLKRST_SSC_REFCLKSEL(0) |
/* Force PortReset of PHY */
PHYCLKRST_PORTRESET |
/* Digital power supply in normal operating mode */
PHYCLKRST_RETENABLEN |
/* Enable ref clock for SS function */
PHYCLKRST_REF_SSP_EN |
/* Enable spread spectrum */
PHYCLKRST_SSC_EN |
/* Power down HS Bias and PLL blocks in suspend mode */
PHYCLKRST_COMMONONN;
writel(reg, &phy->phy_clk_rst);
/* giving time to Phy clock to settle before resetting */
udelay(10);
reg &= ~PHYCLKRST_PORTRESET;
writel(reg, &phy->phy_clk_rst);
}