u-boot/arch/arm/mach-omap2/am33xx/emif4.c
Tom Rini 8627733941 ti816x: Rework DDR initialization sequence
The ti816x/am389x SoC is the first generation in what U-Boot calls the
"am33xx" family.  In the first generation of this family the DDR
initialization sequence is quite different from all of the subsequent
generations.  Whereas with ti814x (second generation) we can easily work
the minor differenced between that and am33xx (third generation), our
attempts to do this for ti816x weren't sufficient.  Rather than add a
large amount of #ifdef logic to make this different sequence work we add
a new file, ti816x_emif4.c to handle the various required undocumented
register writes and sequence and leverage what we can from
arch/arm/mach-omap2/am33xx/ddr.c still.  As DDR2 has similar problems
today but I am unable to test it, we drop the DDR2 defines from the code
rather than imply that it works by leaving it.  We also remove a bunch
of other untested code about changing the speed the DDR runs at.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-05 11:02:23 -04:00

109 lines
2.9 KiB
C

/*
* emif4.c
*
* AM33XX emif4 configuration file
*
* Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/arch/cpu.h>
#include <asm/arch/ddr_defs.h>
#include <asm/arch/hardware.h>
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
#include <asm/io.h>
#include <asm/emif.h>
static struct vtp_reg *vtpreg[2] = {
(struct vtp_reg *)VTP0_CTRL_ADDR,
(struct vtp_reg *)VTP1_CTRL_ADDR};
#ifdef CONFIG_AM33XX
static struct ddr_ctrl *ddrctrl = (struct ddr_ctrl *)DDR_CTRL_ADDR;
#endif
#ifdef CONFIG_AM43XX
static struct ddr_ctrl *ddrctrl = (struct ddr_ctrl *)DDR_CTRL_ADDR;
static struct cm_device_inst *cm_device =
(struct cm_device_inst *)CM_DEVICE_INST;
#endif
#ifdef CONFIG_TI814X
void config_dmm(const struct dmm_lisa_map_regs *regs)
{
struct dmm_lisa_map_regs *hw_lisa_map_regs =
(struct dmm_lisa_map_regs *)DMM_BASE;
enable_dmm_clocks();
writel(0, &hw_lisa_map_regs->dmm_lisa_map_3);
writel(0, &hw_lisa_map_regs->dmm_lisa_map_2);
writel(0, &hw_lisa_map_regs->dmm_lisa_map_1);
writel(0, &hw_lisa_map_regs->dmm_lisa_map_0);
writel(regs->dmm_lisa_map_3, &hw_lisa_map_regs->dmm_lisa_map_3);
writel(regs->dmm_lisa_map_2, &hw_lisa_map_regs->dmm_lisa_map_2);
writel(regs->dmm_lisa_map_1, &hw_lisa_map_regs->dmm_lisa_map_1);
writel(regs->dmm_lisa_map_0, &hw_lisa_map_regs->dmm_lisa_map_0);
}
#endif
static void config_vtp(int nr)
{
writel(readl(&vtpreg[nr]->vtp0ctrlreg) | VTP_CTRL_ENABLE,
&vtpreg[nr]->vtp0ctrlreg);
writel(readl(&vtpreg[nr]->vtp0ctrlreg) & (~VTP_CTRL_START_EN),
&vtpreg[nr]->vtp0ctrlreg);
writel(readl(&vtpreg[nr]->vtp0ctrlreg) | VTP_CTRL_START_EN,
&vtpreg[nr]->vtp0ctrlreg);
/* Poll for READY */
while ((readl(&vtpreg[nr]->vtp0ctrlreg) & VTP_CTRL_READY) !=
VTP_CTRL_READY)
;
}
void __weak ddr_pll_config(unsigned int ddrpll_m)
{
}
void config_ddr(unsigned int pll, const struct ctrl_ioregs *ioregs,
const struct ddr_data *data, const struct cmd_control *ctrl,
const struct emif_regs *regs, int nr)
{
ddr_pll_config(pll);
config_vtp(nr);
config_cmd_ctrl(ctrl, nr);
config_ddr_data(data, nr);
#ifdef CONFIG_AM33XX
config_io_ctrl(ioregs);
/* Set CKE to be controlled by EMIF/DDR PHY */
writel(DDR_CKE_CTRL_NORMAL, &ddrctrl->ddrckectrl);
#endif
#ifdef CONFIG_AM43XX
writel(readl(&cm_device->cm_dll_ctrl) & ~0x1, &cm_device->cm_dll_ctrl);
while ((readl(&cm_device->cm_dll_ctrl) & CM_DLL_READYST) == 0)
;
config_io_ctrl(ioregs);
/* Set CKE to be controlled by EMIF/DDR PHY */
writel(DDR_CKE_CTRL_NORMAL, &ddrctrl->ddrckectrl);
if (emif_sdram_type(regs->sdram_config) == EMIF_SDRAM_TYPE_DDR3)
/* Allow EMIF to control DDR_RESET */
writel(0x00000000, &ddrctrl->ddrioctrl);
#endif
/* Program EMIF instance */
config_ddr_phy(regs, nr);
set_sdram_timings(regs, nr);
if (get_emif_rev(EMIF1_BASE) == EMIF_4D5)
config_sdram_emif4d5(regs, nr);
else
config_sdram(regs, nr);
}