u-boot/drivers/mtd/spi
Yuan Yao 80c1bfd233 sf: Disable 4-KB erase command for SPANSION S25FS-S family
The S25FS-S family physical sectors may be configured as a hybrid
combination of eight 4-kB parameter sectors at the top or bottom
of the address space with all but one of the remaining sectors
being uniform size.
The default status of the flash is in this hybrid architecture.
The parameter sectors and the uniform sectors have different erase
commands.
This patch disable the hybrid sector architecture then the flash will
has uniform sector size and uniform erase command.
This configuration is temporary, the flash will revert to hybrid
architecture after power on reset.

Signed-off-by: Yuan Yao <yao.yuan@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-05-18 08:51:24 -07:00
..
fsl_espi_spl.c driver: Add support of image load for MMC & SPI in SPL 2014-04-22 17:58:50 -07:00
Kconfig sf: Make 4K sector support configurable 2015-08-17 15:59:48 +05:30
Makefile sf: Rename sf_ops.c to spi-flash.c 2015-12-11 22:12:24 +05:30
sandbox.c sandbox: spi: Remove an incorrect free() 2016-02-26 08:53:10 -07:00
sf-uclass.c dm: spi_flash: Allow the uclass to work without printf() 2016-01-15 05:39:27 -07:00
sf.c sf: Add CONFIG_SF_DUAL_FLASH 2014-01-12 21:40:22 +05:30
sf_dataflash.c dm: Rename dev_get_parentdata() to dev_get_parent_priv() 2015-10-23 09:42:28 -06:00
sf_internal.h spi: fsl_qspi: Enable Spansion S25FS-S family flashes 2016-05-18 08:51:16 -07:00
sf_mtd.c mtd, spi: Add MTD layer driver 2015-06-30 00:40:11 +05:30
sf_params.c sf: params: Add IS25LP128 part support 2015-10-25 20:17:03 +05:30
sf_probe.c spi: Correct two error return values 2016-02-26 08:53:10 -07:00
spi_flash.c sf: Disable 4-KB erase command for SPANSION S25FS-S family 2016-05-18 08:51:24 -07:00
spi_spl_load.c spl: change return values of spl_*_load_image() 2015-11-18 14:50:02 -05:00