mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 18:59:44 +00:00
e9b3ce3f7e
The change adds SPL build support to Timll DevKit3250 board, the generated SPL image can be uploaded over UART5, JTAG or stored on NAND. SPL is designed to load U-boot image from NAND. All new NAND chip defines in board configuration are needed by SPL NAND "simple" framework, the framework is used to reduce potentially duplicated code from LPC32xx SLC NAND driver. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
68 lines
1.5 KiB
C
68 lines
1.5 KiB
C
/*
|
|
* Timll DevKit3250 board support, SPL board configuration
|
|
*
|
|
* (C) Copyright 2015 Vladimir Zapolskiy <vz@mleia.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/emc.h>
|
|
#include <asm/arch-lpc32xx/gpio.h>
|
|
#include <spl.h>
|
|
|
|
static struct gpio_regs *gpio = (struct gpio_regs *)GPIO_BASE;
|
|
|
|
/*
|
|
* SDRAM K4S561632N-LC60 settings are selected in assumption that
|
|
* SDRAM clock may be set up to 166 MHz, however at the moment
|
|
* it is 104 MHz. Most delay values are converted to be a multiple of
|
|
* base clock, and precise pinned values are not needed here.
|
|
*/
|
|
struct emc_dram_settings dram_64mb = {
|
|
.cmddelay = 0x0001C000,
|
|
.config0 = 0x00005682,
|
|
.rascas0 = 0x00000302,
|
|
.rdconfig = 0x00000011, /* undocumented but crucial value */
|
|
|
|
.trp = 83333333,
|
|
.tras = 23809524,
|
|
.tsrex = 12500000,
|
|
.twr = 83000000, /* tWR = tRDL = 2 CLK */
|
|
.trc = 15384616,
|
|
.trfc = 15384616,
|
|
.txsr = 12500000,
|
|
.trrd = 1,
|
|
.tmrd = 1,
|
|
.tcdlr = 0,
|
|
|
|
.refresh = 130000, /* 800 clock cycles */
|
|
|
|
.mode = 0x00018000,
|
|
.emode = 0x02000000,
|
|
};
|
|
|
|
void spl_board_init(void)
|
|
{
|
|
/* First of all silence buzzer controlled by GPO_20 */
|
|
writel((1 << 20), &gpio->p3_outp_clr);
|
|
|
|
lpc32xx_uart_init(CONFIG_SYS_LPC32XX_UART);
|
|
preloader_console_init();
|
|
|
|
ddr_init(&dram_64mb);
|
|
|
|
/*
|
|
* NAND initialization is done by nand_init(),
|
|
* here just enable NAND SLC clocks
|
|
*/
|
|
lpc32xx_slc_nand_init();
|
|
}
|
|
|
|
u32 spl_boot_device(void)
|
|
{
|
|
return BOOT_DEVICE_NAND;
|
|
}
|