mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 00:47:26 +00:00
36f32675f4
Physical addrs need to be represented by phys_addr_t, not unsigned long. Otherwise, systems that use CONFIG_PHYS_64BIT are going to fail mightily. Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
513 lines
22 KiB
C
513 lines
22 KiB
C
/*
|
|
* (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
|
|
* Andreas Heppel <aheppel@sysgo.de>
|
|
*
|
|
* (C) Copyright 2002
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* aloong with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef _PCI_H
|
|
#define _PCI_H
|
|
|
|
/*
|
|
* Under PCI, each device has 256 bytes of configuration address space,
|
|
* of which the first 64 bytes are standardized as follows:
|
|
*/
|
|
#define PCI_VENDOR_ID 0x00 /* 16 bits */
|
|
#define PCI_DEVICE_ID 0x02 /* 16 bits */
|
|
#define PCI_COMMAND 0x04 /* 16 bits */
|
|
#define PCI_COMMAND_IO 0x1 /* Enable response in I/O space */
|
|
#define PCI_COMMAND_MEMORY 0x2 /* Enable response in Memory space */
|
|
#define PCI_COMMAND_MASTER 0x4 /* Enable bus mastering */
|
|
#define PCI_COMMAND_SPECIAL 0x8 /* Enable response to special cycles */
|
|
#define PCI_COMMAND_INVALIDATE 0x10 /* Use memory write and invalidate */
|
|
#define PCI_COMMAND_VGA_PALETTE 0x20 /* Enable palette snooping */
|
|
#define PCI_COMMAND_PARITY 0x40 /* Enable parity checking */
|
|
#define PCI_COMMAND_WAIT 0x80 /* Enable address/data stepping */
|
|
#define PCI_COMMAND_SERR 0x100 /* Enable SERR */
|
|
#define PCI_COMMAND_FAST_BACK 0x200 /* Enable back-to-back writes */
|
|
|
|
#define PCI_STATUS 0x06 /* 16 bits */
|
|
#define PCI_STATUS_CAP_LIST 0x10 /* Support Capability List */
|
|
#define PCI_STATUS_66MHZ 0x20 /* Support 66 Mhz PCI 2.1 bus */
|
|
#define PCI_STATUS_UDF 0x40 /* Support User Definable Features [obsolete] */
|
|
#define PCI_STATUS_FAST_BACK 0x80 /* Accept fast-back to back */
|
|
#define PCI_STATUS_PARITY 0x100 /* Detected parity error */
|
|
#define PCI_STATUS_DEVSEL_MASK 0x600 /* DEVSEL timing */
|
|
#define PCI_STATUS_DEVSEL_FAST 0x000
|
|
#define PCI_STATUS_DEVSEL_MEDIUM 0x200
|
|
#define PCI_STATUS_DEVSEL_SLOW 0x400
|
|
#define PCI_STATUS_SIG_TARGET_ABORT 0x800 /* Set on target abort */
|
|
#define PCI_STATUS_REC_TARGET_ABORT 0x1000 /* Master ack of " */
|
|
#define PCI_STATUS_REC_MASTER_ABORT 0x2000 /* Set on master abort */
|
|
#define PCI_STATUS_SIG_SYSTEM_ERROR 0x4000 /* Set when we drive SERR */
|
|
#define PCI_STATUS_DETECTED_PARITY 0x8000 /* Set on parity error */
|
|
|
|
#define PCI_CLASS_REVISION 0x08 /* High 24 bits are class, low 8
|
|
revision */
|
|
#define PCI_REVISION_ID 0x08 /* Revision ID */
|
|
#define PCI_CLASS_PROG 0x09 /* Reg. Level Programming Interface */
|
|
#define PCI_CLASS_DEVICE 0x0a /* Device class */
|
|
#define PCI_CLASS_CODE 0x0b /* Device class code */
|
|
#define PCI_CLASS_SUB_CODE 0x0a /* Device sub-class code */
|
|
|
|
#define PCI_CACHE_LINE_SIZE 0x0c /* 8 bits */
|
|
#define PCI_LATENCY_TIMER 0x0d /* 8 bits */
|
|
#define PCI_HEADER_TYPE 0x0e /* 8 bits */
|
|
#define PCI_HEADER_TYPE_NORMAL 0
|
|
#define PCI_HEADER_TYPE_BRIDGE 1
|
|
#define PCI_HEADER_TYPE_CARDBUS 2
|
|
|
|
#define PCI_BIST 0x0f /* 8 bits */
|
|
#define PCI_BIST_CODE_MASK 0x0f /* Return result */
|
|
#define PCI_BIST_START 0x40 /* 1 to start BIST, 2 secs or less */
|
|
#define PCI_BIST_CAPABLE 0x80 /* 1 if BIST capable */
|
|
|
|
/*
|
|
* Base addresses specify locations in memory or I/O space.
|
|
* Decoded size can be determined by writing a value of
|
|
* 0xffffffff to the register, and reading it back. Only
|
|
* 1 bits are decoded.
|
|
*/
|
|
#define PCI_BASE_ADDRESS_0 0x10 /* 32 bits */
|
|
#define PCI_BASE_ADDRESS_1 0x14 /* 32 bits [htype 0,1 only] */
|
|
#define PCI_BASE_ADDRESS_2 0x18 /* 32 bits [htype 0 only] */
|
|
#define PCI_BASE_ADDRESS_3 0x1c /* 32 bits */
|
|
#define PCI_BASE_ADDRESS_4 0x20 /* 32 bits */
|
|
#define PCI_BASE_ADDRESS_5 0x24 /* 32 bits */
|
|
#define PCI_BASE_ADDRESS_SPACE 0x01 /* 0 = memory, 1 = I/O */
|
|
#define PCI_BASE_ADDRESS_SPACE_IO 0x01
|
|
#define PCI_BASE_ADDRESS_SPACE_MEMORY 0x00
|
|
#define PCI_BASE_ADDRESS_MEM_TYPE_MASK 0x06
|
|
#define PCI_BASE_ADDRESS_MEM_TYPE_32 0x00 /* 32 bit address */
|
|
#define PCI_BASE_ADDRESS_MEM_TYPE_1M 0x02 /* Below 1M [obsolete] */
|
|
#define PCI_BASE_ADDRESS_MEM_TYPE_64 0x04 /* 64 bit address */
|
|
#define PCI_BASE_ADDRESS_MEM_PREFETCH 0x08 /* prefetchable? */
|
|
#define PCI_BASE_ADDRESS_MEM_MASK (~0x0fUL)
|
|
#define PCI_BASE_ADDRESS_IO_MASK (~0x03UL)
|
|
/* bit 1 is reserved if address_space = 1 */
|
|
|
|
/* Header type 0 (normal devices) */
|
|
#define PCI_CARDBUS_CIS 0x28
|
|
#define PCI_SUBSYSTEM_VENDOR_ID 0x2c
|
|
#define PCI_SUBSYSTEM_ID 0x2e
|
|
#define PCI_ROM_ADDRESS 0x30 /* Bits 31..11 are address, 10..1 reserved */
|
|
#define PCI_ROM_ADDRESS_ENABLE 0x01
|
|
#define PCI_ROM_ADDRESS_MASK (~0x7ffUL)
|
|
|
|
#define PCI_CAPABILITY_LIST 0x34 /* Offset of first capability list entry */
|
|
|
|
/* 0x35-0x3b are reserved */
|
|
#define PCI_INTERRUPT_LINE 0x3c /* 8 bits */
|
|
#define PCI_INTERRUPT_PIN 0x3d /* 8 bits */
|
|
#define PCI_MIN_GNT 0x3e /* 8 bits */
|
|
#define PCI_MAX_LAT 0x3f /* 8 bits */
|
|
|
|
/* Header type 1 (PCI-to-PCI bridges) */
|
|
#define PCI_PRIMARY_BUS 0x18 /* Primary bus number */
|
|
#define PCI_SECONDARY_BUS 0x19 /* Secondary bus number */
|
|
#define PCI_SUBORDINATE_BUS 0x1a /* Highest bus number behind the bridge */
|
|
#define PCI_SEC_LATENCY_TIMER 0x1b /* Latency timer for secondary interface */
|
|
#define PCI_IO_BASE 0x1c /* I/O range behind the bridge */
|
|
#define PCI_IO_LIMIT 0x1d
|
|
#define PCI_IO_RANGE_TYPE_MASK 0x0f /* I/O bridging type */
|
|
#define PCI_IO_RANGE_TYPE_16 0x00
|
|
#define PCI_IO_RANGE_TYPE_32 0x01
|
|
#define PCI_IO_RANGE_MASK ~0x0f
|
|
#define PCI_SEC_STATUS 0x1e /* Secondary status register, only bit 14 used */
|
|
#define PCI_MEMORY_BASE 0x20 /* Memory range behind */
|
|
#define PCI_MEMORY_LIMIT 0x22
|
|
#define PCI_MEMORY_RANGE_TYPE_MASK 0x0f
|
|
#define PCI_MEMORY_RANGE_MASK ~0x0f
|
|
#define PCI_PREF_MEMORY_BASE 0x24 /* Prefetchable memory range behind */
|
|
#define PCI_PREF_MEMORY_LIMIT 0x26
|
|
#define PCI_PREF_RANGE_TYPE_MASK 0x0f
|
|
#define PCI_PREF_RANGE_TYPE_32 0x00
|
|
#define PCI_PREF_RANGE_TYPE_64 0x01
|
|
#define PCI_PREF_RANGE_MASK ~0x0f
|
|
#define PCI_PREF_BASE_UPPER32 0x28 /* Upper half of prefetchable memory range */
|
|
#define PCI_PREF_LIMIT_UPPER32 0x2c
|
|
#define PCI_IO_BASE_UPPER16 0x30 /* Upper half of I/O addresses */
|
|
#define PCI_IO_LIMIT_UPPER16 0x32
|
|
/* 0x34 same as for htype 0 */
|
|
/* 0x35-0x3b is reserved */
|
|
#define PCI_ROM_ADDRESS1 0x38 /* Same as PCI_ROM_ADDRESS, but for htype 1 */
|
|
/* 0x3c-0x3d are same as for htype 0 */
|
|
#define PCI_BRIDGE_CONTROL 0x3e
|
|
#define PCI_BRIDGE_CTL_PARITY 0x01 /* Enable parity detection on secondary interface */
|
|
#define PCI_BRIDGE_CTL_SERR 0x02 /* The same for SERR forwarding */
|
|
#define PCI_BRIDGE_CTL_NO_ISA 0x04 /* Disable bridging of ISA ports */
|
|
#define PCI_BRIDGE_CTL_VGA 0x08 /* Forward VGA addresses */
|
|
#define PCI_BRIDGE_CTL_MASTER_ABORT 0x20 /* Report master aborts */
|
|
#define PCI_BRIDGE_CTL_BUS_RESET 0x40 /* Secondary bus reset */
|
|
#define PCI_BRIDGE_CTL_FAST_BACK 0x80 /* Fast Back2Back enabled on secondary interface */
|
|
|
|
/* From 440ep */
|
|
#define PCI_ERREN 0x48 /* Error Enable */
|
|
#define PCI_ERRSTS 0x49 /* Error Status */
|
|
#define PCI_BRDGOPT1 0x4A /* PCI Bridge Options 1 */
|
|
#define PCI_PLBSESR0 0x4C /* PCI PLB Slave Error Syndrome 0 */
|
|
#define PCI_PLBSESR1 0x50 /* PCI PLB Slave Error Syndrome 1 */
|
|
#define PCI_PLBSEAR 0x54 /* PCI PLB Slave Error Address */
|
|
#define PCI_CAPID 0x58 /* Capability Identifier */
|
|
#define PCI_NEXTITEMPTR 0x59 /* Next Item Pointer */
|
|
#define PCI_PMC 0x5A /* Power Management Capabilities */
|
|
#define PCI_PMCSR 0x5C /* Power Management Control Status */
|
|
#define PCI_PMCSRBSE 0x5E /* PMCSR PCI to PCI Bridge Support Extensions */
|
|
#define PCI_BRDGOPT2 0x60 /* PCI Bridge Options 2 */
|
|
#define PCI_PMSCRR 0x64 /* Power Management State Change Request Re. */
|
|
|
|
/* Header type 2 (CardBus bridges) */
|
|
#define PCI_CB_CAPABILITY_LIST 0x14
|
|
/* 0x15 reserved */
|
|
#define PCI_CB_SEC_STATUS 0x16 /* Secondary status */
|
|
#define PCI_CB_PRIMARY_BUS 0x18 /* PCI bus number */
|
|
#define PCI_CB_CARD_BUS 0x19 /* CardBus bus number */
|
|
#define PCI_CB_SUBORDINATE_BUS 0x1a /* Subordinate bus number */
|
|
#define PCI_CB_LATENCY_TIMER 0x1b /* CardBus latency timer */
|
|
#define PCI_CB_MEMORY_BASE_0 0x1c
|
|
#define PCI_CB_MEMORY_LIMIT_0 0x20
|
|
#define PCI_CB_MEMORY_BASE_1 0x24
|
|
#define PCI_CB_MEMORY_LIMIT_1 0x28
|
|
#define PCI_CB_IO_BASE_0 0x2c
|
|
#define PCI_CB_IO_BASE_0_HI 0x2e
|
|
#define PCI_CB_IO_LIMIT_0 0x30
|
|
#define PCI_CB_IO_LIMIT_0_HI 0x32
|
|
#define PCI_CB_IO_BASE_1 0x34
|
|
#define PCI_CB_IO_BASE_1_HI 0x36
|
|
#define PCI_CB_IO_LIMIT_1 0x38
|
|
#define PCI_CB_IO_LIMIT_1_HI 0x3a
|
|
#define PCI_CB_IO_RANGE_MASK ~0x03
|
|
/* 0x3c-0x3d are same as for htype 0 */
|
|
#define PCI_CB_BRIDGE_CONTROL 0x3e
|
|
#define PCI_CB_BRIDGE_CTL_PARITY 0x01 /* Similar to standard bridge control register */
|
|
#define PCI_CB_BRIDGE_CTL_SERR 0x02
|
|
#define PCI_CB_BRIDGE_CTL_ISA 0x04
|
|
#define PCI_CB_BRIDGE_CTL_VGA 0x08
|
|
#define PCI_CB_BRIDGE_CTL_MASTER_ABORT 0x20
|
|
#define PCI_CB_BRIDGE_CTL_CB_RESET 0x40 /* CardBus reset */
|
|
#define PCI_CB_BRIDGE_CTL_16BIT_INT 0x80 /* Enable interrupt for 16-bit cards */
|
|
#define PCI_CB_BRIDGE_CTL_PREFETCH_MEM0 0x100 /* Prefetch enable for both memory regions */
|
|
#define PCI_CB_BRIDGE_CTL_PREFETCH_MEM1 0x200
|
|
#define PCI_CB_BRIDGE_CTL_POST_WRITES 0x400
|
|
#define PCI_CB_SUBSYSTEM_VENDOR_ID 0x40
|
|
#define PCI_CB_SUBSYSTEM_ID 0x42
|
|
#define PCI_CB_LEGACY_MODE_BASE 0x44 /* 16-bit PC Card legacy mode base address (ExCa) */
|
|
/* 0x48-0x7f reserved */
|
|
|
|
/* Capability lists */
|
|
|
|
#define PCI_CAP_LIST_ID 0 /* Capability ID */
|
|
#define PCI_CAP_ID_PM 0x01 /* Power Management */
|
|
#define PCI_CAP_ID_AGP 0x02 /* Accelerated Graphics Port */
|
|
#define PCI_CAP_ID_VPD 0x03 /* Vital Product Data */
|
|
#define PCI_CAP_ID_SLOTID 0x04 /* Slot Identification */
|
|
#define PCI_CAP_ID_MSI 0x05 /* Message Signalled Interrupts */
|
|
#define PCI_CAP_ID_CHSWP 0x06 /* CompactPCI HotSwap */
|
|
#define PCI_CAP_LIST_NEXT 1 /* Next capability in the list */
|
|
#define PCI_CAP_FLAGS 2 /* Capability defined flags (16 bits) */
|
|
#define PCI_CAP_SIZEOF 4
|
|
|
|
/* Power Management Registers */
|
|
|
|
#define PCI_PM_CAP_VER_MASK 0x0007 /* Version */
|
|
#define PCI_PM_CAP_PME_CLOCK 0x0008 /* PME clock required */
|
|
#define PCI_PM_CAP_AUX_POWER 0x0010 /* Auxilliary power support */
|
|
#define PCI_PM_CAP_DSI 0x0020 /* Device specific initialization */
|
|
#define PCI_PM_CAP_D1 0x0200 /* D1 power state support */
|
|
#define PCI_PM_CAP_D2 0x0400 /* D2 power state support */
|
|
#define PCI_PM_CAP_PME 0x0800 /* PME pin supported */
|
|
#define PCI_PM_CTRL 4 /* PM control and status register */
|
|
#define PCI_PM_CTRL_STATE_MASK 0x0003 /* Current power state (D0 to D3) */
|
|
#define PCI_PM_CTRL_PME_ENABLE 0x0100 /* PME pin enable */
|
|
#define PCI_PM_CTRL_DATA_SEL_MASK 0x1e00 /* Data select (??) */
|
|
#define PCI_PM_CTRL_DATA_SCALE_MASK 0x6000 /* Data scale (??) */
|
|
#define PCI_PM_CTRL_PME_STATUS 0x8000 /* PME pin status */
|
|
#define PCI_PM_PPB_EXTENSIONS 6 /* PPB support extensions (??) */
|
|
#define PCI_PM_PPB_B2_B3 0x40 /* Stop clock when in D3hot (??) */
|
|
#define PCI_PM_BPCC_ENABLE 0x80 /* Bus power/clock control enable (??) */
|
|
#define PCI_PM_DATA_REGISTER 7 /* (??) */
|
|
#define PCI_PM_SIZEOF 8
|
|
|
|
/* AGP registers */
|
|
|
|
#define PCI_AGP_VERSION 2 /* BCD version number */
|
|
#define PCI_AGP_RFU 3 /* Rest of capability flags */
|
|
#define PCI_AGP_STATUS 4 /* Status register */
|
|
#define PCI_AGP_STATUS_RQ_MASK 0xff000000 /* Maximum number of requests - 1 */
|
|
#define PCI_AGP_STATUS_SBA 0x0200 /* Sideband addressing supported */
|
|
#define PCI_AGP_STATUS_64BIT 0x0020 /* 64-bit addressing supported */
|
|
#define PCI_AGP_STATUS_FW 0x0010 /* FW transfers supported */
|
|
#define PCI_AGP_STATUS_RATE4 0x0004 /* 4x transfer rate supported */
|
|
#define PCI_AGP_STATUS_RATE2 0x0002 /* 2x transfer rate supported */
|
|
#define PCI_AGP_STATUS_RATE1 0x0001 /* 1x transfer rate supported */
|
|
#define PCI_AGP_COMMAND 8 /* Control register */
|
|
#define PCI_AGP_COMMAND_RQ_MASK 0xff000000 /* Master: Maximum number of requests */
|
|
#define PCI_AGP_COMMAND_SBA 0x0200 /* Sideband addressing enabled */
|
|
#define PCI_AGP_COMMAND_AGP 0x0100 /* Allow processing of AGP transactions */
|
|
#define PCI_AGP_COMMAND_64BIT 0x0020 /* Allow processing of 64-bit addresses */
|
|
#define PCI_AGP_COMMAND_FW 0x0010 /* Force FW transfers */
|
|
#define PCI_AGP_COMMAND_RATE4 0x0004 /* Use 4x rate */
|
|
#define PCI_AGP_COMMAND_RATE2 0x0002 /* Use 4x rate */
|
|
#define PCI_AGP_COMMAND_RATE1 0x0001 /* Use 4x rate */
|
|
#define PCI_AGP_SIZEOF 12
|
|
|
|
/* PCI-X registers */
|
|
|
|
#define PCI_X_CMD_DPERR_E 0x0001 /* Data Parity Error Recovery Enable */
|
|
#define PCI_X_CMD_ERO 0x0002 /* Enable Relaxed Ordering */
|
|
#define PCI_X_CMD_MAX_READ 0x0000 /* Max Memory Read Byte Count */
|
|
#define PCI_X_CMD_MAX_SPLIT 0x0030 /* Max Outstanding Split Transactions */
|
|
#define PCI_X_CMD_VERSION(x) (((x) >> 12) & 3) /* Version */
|
|
|
|
|
|
/* Slot Identification */
|
|
|
|
#define PCI_SID_ESR 2 /* Expansion Slot Register */
|
|
#define PCI_SID_ESR_NSLOTS 0x1f /* Number of expansion slots available */
|
|
#define PCI_SID_ESR_FIC 0x20 /* First In Chassis Flag */
|
|
#define PCI_SID_CHASSIS_NR 3 /* Chassis Number */
|
|
|
|
/* Message Signalled Interrupts registers */
|
|
|
|
#define PCI_MSI_FLAGS 2 /* Various flags */
|
|
#define PCI_MSI_FLAGS_64BIT 0x80 /* 64-bit addresses allowed */
|
|
#define PCI_MSI_FLAGS_QSIZE 0x70 /* Message queue size configured */
|
|
#define PCI_MSI_FLAGS_QMASK 0x0e /* Maximum queue size available */
|
|
#define PCI_MSI_FLAGS_ENABLE 0x01 /* MSI feature enabled */
|
|
#define PCI_MSI_RFU 3 /* Rest of capability flags */
|
|
#define PCI_MSI_ADDRESS_LO 4 /* Lower 32 bits */
|
|
#define PCI_MSI_ADDRESS_HI 8 /* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */
|
|
#define PCI_MSI_DATA_32 8 /* 16 bits of data for 32-bit devices */
|
|
#define PCI_MSI_DATA_64 12 /* 16 bits of data for 64-bit devices */
|
|
|
|
#define PCI_MAX_PCI_DEVICES 32
|
|
#define PCI_MAX_PCI_FUNCTIONS 8
|
|
|
|
#define PCI_DCR 0x54 /* PCIe Device Control Register */
|
|
#define PCI_DSR 0x56 /* PCIe Device Status Register */
|
|
#define PCI_LSR 0x5e /* PCIe Link Status Register */
|
|
#define PCI_LTSSM 0x404 /* PCIe Link Training, Status State Machine */
|
|
#define PCI_LTSSM_L0 0x16 /* L0 state */
|
|
|
|
/* Include the ID list */
|
|
|
|
#include <pci_ids.h>
|
|
|
|
struct pci_region {
|
|
unsigned long bus_start; /* Start on the bus */
|
|
phys_addr_t phys_start; /* Start in physical address space */
|
|
unsigned long size; /* Size */
|
|
unsigned long flags; /* Resource flags */
|
|
|
|
unsigned long bus_lower;
|
|
};
|
|
|
|
#define PCI_REGION_MEM 0x00000000 /* PCI memory space */
|
|
#define PCI_REGION_IO 0x00000001 /* PCI IO space */
|
|
#define PCI_REGION_TYPE 0x00000001
|
|
#define PCI_REGION_PREFETCH 0x00000008 /* prefetchable PCI memory */
|
|
|
|
#define PCI_REGION_MEMORY 0x00000100 /* System memory */
|
|
#define PCI_REGION_RO 0x00000200 /* Read-only memory */
|
|
|
|
extern __inline__ void pci_set_region(struct pci_region *reg,
|
|
unsigned long bus_start,
|
|
phys_addr_t phys_start,
|
|
unsigned long size,
|
|
unsigned long flags) {
|
|
reg->bus_start = bus_start;
|
|
reg->phys_start = phys_start;
|
|
reg->size = size;
|
|
reg->flags = flags;
|
|
}
|
|
|
|
typedef int pci_dev_t;
|
|
|
|
#define PCI_BUS(d) (((d) >> 16) & 0xff)
|
|
#define PCI_DEV(d) (((d) >> 11) & 0x1f)
|
|
#define PCI_FUNC(d) (((d) >> 8) & 0x7)
|
|
#define PCI_BDF(b,d,f) ((b) << 16 | (d) << 11 | (f) << 8)
|
|
|
|
#define PCI_ANY_ID (~0)
|
|
|
|
struct pci_device_id {
|
|
unsigned int vendor, device; /* Vendor and device ID or PCI_ANY_ID */
|
|
};
|
|
|
|
struct pci_controller;
|
|
|
|
struct pci_config_table {
|
|
unsigned int vendor, device; /* Vendor and device ID or PCI_ANY_ID */
|
|
unsigned int class; /* Class ID, or PCI_ANY_ID */
|
|
unsigned int bus; /* Bus number, or PCI_ANY_ID */
|
|
unsigned int dev; /* Device number, or PCI_ANY_ID */
|
|
unsigned int func; /* Function number, or PCI_ANY_ID */
|
|
|
|
void (*config_device)(struct pci_controller* hose, pci_dev_t dev,
|
|
struct pci_config_table *);
|
|
unsigned long priv[3];
|
|
};
|
|
|
|
extern void pci_cfgfunc_do_nothing(struct pci_controller* hose, pci_dev_t dev,
|
|
struct pci_config_table *);
|
|
extern void pci_cfgfunc_config_device(struct pci_controller* hose, pci_dev_t dev,
|
|
struct pci_config_table *);
|
|
|
|
#define MAX_PCI_REGIONS 7
|
|
|
|
/*
|
|
* Structure of a PCI controller (host bridge)
|
|
*/
|
|
struct pci_controller {
|
|
struct pci_controller *next;
|
|
|
|
int first_busno;
|
|
int last_busno;
|
|
|
|
volatile unsigned int *cfg_addr;
|
|
volatile unsigned char *cfg_data;
|
|
|
|
struct pci_region regions[MAX_PCI_REGIONS];
|
|
int region_count;
|
|
|
|
struct pci_config_table *config_table;
|
|
|
|
void (*fixup_irq)(struct pci_controller *, pci_dev_t);
|
|
|
|
/* Low-level architecture-dependent routines */
|
|
int (*read_byte)(struct pci_controller*, pci_dev_t, int where, u8 *);
|
|
int (*read_word)(struct pci_controller*, pci_dev_t, int where, u16 *);
|
|
int (*read_dword)(struct pci_controller*, pci_dev_t, int where, u32 *);
|
|
int (*write_byte)(struct pci_controller*, pci_dev_t, int where, u8);
|
|
int (*write_word)(struct pci_controller*, pci_dev_t, int where, u16);
|
|
int (*write_dword)(struct pci_controller*, pci_dev_t, int where, u32);
|
|
|
|
/* Used by auto config */
|
|
struct pci_region *pci_mem, *pci_io, *pci_prefetch;
|
|
|
|
/* Used by ppc405 autoconfig*/
|
|
struct pci_region *pci_fb;
|
|
int current_busno;
|
|
};
|
|
|
|
extern __inline__ void pci_set_ops(struct pci_controller *hose,
|
|
int (*read_byte)(struct pci_controller*,
|
|
pci_dev_t, int where, u8 *),
|
|
int (*read_word)(struct pci_controller*,
|
|
pci_dev_t, int where, u16 *),
|
|
int (*read_dword)(struct pci_controller*,
|
|
pci_dev_t, int where, u32 *),
|
|
int (*write_byte)(struct pci_controller*,
|
|
pci_dev_t, int where, u8),
|
|
int (*write_word)(struct pci_controller*,
|
|
pci_dev_t, int where, u16),
|
|
int (*write_dword)(struct pci_controller*,
|
|
pci_dev_t, int where, u32)) {
|
|
hose->read_byte = read_byte;
|
|
hose->read_word = read_word;
|
|
hose->read_dword = read_dword;
|
|
hose->write_byte = write_byte;
|
|
hose->write_word = write_word;
|
|
hose->write_dword = write_dword;
|
|
}
|
|
|
|
extern void pci_setup_indirect(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data);
|
|
|
|
extern phys_addr_t pci_hose_bus_to_phys(struct pci_controller* hose,
|
|
unsigned long addr, unsigned long flags);
|
|
extern unsigned long pci_hose_phys_to_bus(struct pci_controller* hose,
|
|
phys_addr_t addr, unsigned long flags);
|
|
|
|
#define pci_phys_to_bus(dev, addr, flags) \
|
|
pci_hose_phys_to_bus(pci_bus_to_hose(PCI_BUS(dev)), (addr), (flags))
|
|
#define pci_bus_to_phys(dev, addr, flags) \
|
|
pci_hose_bus_to_phys(pci_bus_to_hose(PCI_BUS(dev)), (addr), (flags))
|
|
|
|
#define pci_phys_to_mem(dev, addr) pci_phys_to_bus((dev), (addr), PCI_REGION_MEM)
|
|
#define pci_mem_to_phys(dev, addr) pci_bus_to_phys((dev), (addr), PCI_REGION_MEM)
|
|
#define pci_phys_to_io(dev, addr) pci_phys_to_bus((dev), (addr), PCI_REGION_IO)
|
|
#define pci_io_to_phys(dev, addr) pci_bus_to_phys((dev), (addr), PCI_REGION_IO)
|
|
|
|
extern int pci_hose_read_config_byte(struct pci_controller *hose,
|
|
pci_dev_t dev, int where, u8 *val);
|
|
extern int pci_hose_read_config_word(struct pci_controller *hose,
|
|
pci_dev_t dev, int where, u16 *val);
|
|
extern int pci_hose_read_config_dword(struct pci_controller *hose,
|
|
pci_dev_t dev, int where, u32 *val);
|
|
extern int pci_hose_write_config_byte(struct pci_controller *hose,
|
|
pci_dev_t dev, int where, u8 val);
|
|
extern int pci_hose_write_config_word(struct pci_controller *hose,
|
|
pci_dev_t dev, int where, u16 val);
|
|
extern int pci_hose_write_config_dword(struct pci_controller *hose,
|
|
pci_dev_t dev, int where, u32 val);
|
|
|
|
extern int pci_read_config_byte(pci_dev_t dev, int where, u8 *val);
|
|
extern int pci_read_config_word(pci_dev_t dev, int where, u16 *val);
|
|
extern int pci_read_config_dword(pci_dev_t dev, int where, u32 *val);
|
|
extern int pci_write_config_byte(pci_dev_t dev, int where, u8 val);
|
|
extern int pci_write_config_word(pci_dev_t dev, int where, u16 val);
|
|
extern int pci_write_config_dword(pci_dev_t dev, int where, u32 val);
|
|
|
|
extern int pci_hose_read_config_byte_via_dword(struct pci_controller *hose,
|
|
pci_dev_t dev, int where, u8 *val);
|
|
extern int pci_hose_read_config_word_via_dword(struct pci_controller *hose,
|
|
pci_dev_t dev, int where, u16 *val);
|
|
extern int pci_hose_write_config_byte_via_dword(struct pci_controller *hose,
|
|
pci_dev_t dev, int where, u8 val);
|
|
extern int pci_hose_write_config_word_via_dword(struct pci_controller *hose,
|
|
pci_dev_t dev, int where, u16 val);
|
|
|
|
extern void pci_register_hose(struct pci_controller* hose);
|
|
extern struct pci_controller* pci_bus_to_hose(int bus);
|
|
|
|
extern int pci_hose_scan(struct pci_controller *hose);
|
|
extern int pci_hose_scan_bus(struct pci_controller *hose, int bus);
|
|
|
|
extern void pciauto_region_init(struct pci_region* res);
|
|
extern void pciauto_region_align(struct pci_region *res, unsigned long size);
|
|
extern int pciauto_region_allocate(struct pci_region* res, unsigned int size, unsigned int *bar);
|
|
extern void pciauto_setup_device(struct pci_controller *hose,
|
|
pci_dev_t dev, int bars_num,
|
|
struct pci_region *mem,
|
|
struct pci_region *prefetch,
|
|
struct pci_region *io);
|
|
int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev);
|
|
|
|
extern pci_dev_t pci_find_device (unsigned int vendor, unsigned int device, int index);
|
|
extern pci_dev_t pci_find_devices (struct pci_device_id *ids, int index);
|
|
extern pci_dev_t pci_find_class(int wanted_class, int wanted_sub_code,
|
|
int wanted_prog_if, int index);
|
|
|
|
extern int pci_hose_config_device(struct pci_controller *hose,
|
|
pci_dev_t dev,
|
|
unsigned long io,
|
|
unsigned long mem,
|
|
unsigned long command);
|
|
|
|
#ifdef CONFIG_MPC824X
|
|
extern void pci_mpc824x_init (struct pci_controller *hose);
|
|
#endif
|
|
|
|
#ifdef CONFIG_MPC85xx
|
|
extern void pci_mpc85xx_init (struct pci_controller *hose);
|
|
#endif
|
|
#endif /* _PCI_H */
|