mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-13 14:53:06 +00:00
9ea30ea66a
In certain TI SoCs, on the CPSW and ICSS peripherals, there is a possibility that the MDIO interface returns corrupt data on MDIO reads or writes incorrect data on MDIO writes. There is also a possibility for the MDIO interface to become unavailable until the next peripheral reset. The workaround is to configure the MDIO in manual mode and disable the MDIO state machine and emulate the MDIO protocol by reading and writing appropriate fields in MDIO_MANUAL_IF_REG register of the MDIO controller to manipulate the MDIO clock and data pins. More details about the errata i2329 and the workaround is available in: https://www.ti.com/lit/er/sprz487a/sprz487a.pdf Add implementation to disable MDIO state machine, configure MDIO in manual mode and provide software MDIO read and writes via MDIO bitbanging. Allow the MDIO to be initialized based on the need for manual mode. Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
454 lines
10 KiB
C
454 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* CPSW MDIO generic driver for TI AMxx/K2x/EMAC devices.
|
|
*
|
|
* Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <log.h>
|
|
#include <malloc.h>
|
|
#include <asm/io.h>
|
|
#include <miiphy.h>
|
|
#include <wait_bit.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
|
|
struct cpsw_mdio_regs {
|
|
u32 version;
|
|
u32 control;
|
|
#define CONTROL_IDLE BIT(31)
|
|
#define CONTROL_ENABLE BIT(30)
|
|
#define CONTROL_FAULT BIT(19)
|
|
#define CONTROL_FAULT_ENABLE BIT(18)
|
|
#define CONTROL_DIV_MASK GENMASK(15, 0)
|
|
|
|
#define MDIO_MAN_MDCLK_O BIT(2)
|
|
#define MDIO_MAN_OE BIT(1)
|
|
#define MDIO_MAN_PIN BIT(0)
|
|
#define MDIO_MANUALMODE BIT(31)
|
|
|
|
u32 alive;
|
|
u32 link;
|
|
u32 linkintraw;
|
|
u32 linkintmasked;
|
|
u32 __reserved_0[2];
|
|
u32 userintraw;
|
|
u32 userintmasked;
|
|
u32 userintmaskset;
|
|
u32 userintmaskclr;
|
|
u32 manualif;
|
|
u32 poll;
|
|
u32 __reserved_1[18];
|
|
|
|
struct {
|
|
u32 access;
|
|
u32 physel;
|
|
#define USERACCESS_GO BIT(31)
|
|
#define USERACCESS_WRITE BIT(30)
|
|
#define USERACCESS_ACK BIT(29)
|
|
#define USERACCESS_READ (0)
|
|
#define USERACCESS_PHY_REG_SHIFT (21)
|
|
#define USERACCESS_PHY_ADDR_SHIFT (16)
|
|
#define USERACCESS_DATA GENMASK(15, 0)
|
|
} user[0];
|
|
};
|
|
|
|
#define CPSW_MDIO_DIV_DEF 0xff
|
|
#define PHY_REG_MASK 0x1f
|
|
#define PHY_ID_MASK 0x1f
|
|
|
|
#define MDIO_BITRANGE 0x8000
|
|
#define C22_READ_PATTERN 0x6
|
|
#define C22_WRITE_PATTERN 0x5
|
|
#define C22_BITRANGE 0x8
|
|
#define PHY_BITRANGE 0x10
|
|
#define PHY_DATA_BITRANGE 0x8000
|
|
|
|
/*
|
|
* This timeout definition is a worst-case ultra defensive measure against
|
|
* unexpected controller lock ups. Ideally, we should never ever hit this
|
|
* scenario in practice.
|
|
*/
|
|
#define CPSW_MDIO_TIMEOUT 100 /* msecs */
|
|
|
|
enum cpsw_mdio_manual {
|
|
MDIO_PIN = 0,
|
|
MDIO_OE,
|
|
MDIO_MDCLK,
|
|
};
|
|
|
|
struct cpsw_mdio {
|
|
struct cpsw_mdio_regs *regs;
|
|
struct mii_dev *bus;
|
|
int div;
|
|
};
|
|
|
|
static void cpsw_mdio_disable(struct cpsw_mdio *mdio)
|
|
{
|
|
u32 reg;
|
|
/* Disable MDIO state machine */
|
|
reg = readl(&mdio->regs->control);
|
|
reg &= ~CONTROL_ENABLE;
|
|
|
|
writel(reg, &mdio->regs->control);
|
|
}
|
|
|
|
static void cpsw_mdio_enable_manual_mode(struct cpsw_mdio *mdio)
|
|
{
|
|
u32 reg;
|
|
|
|
/* set manual mode */
|
|
reg = readl(&mdio->regs->poll);
|
|
reg |= MDIO_MANUALMODE;
|
|
|
|
writel(reg, &mdio->regs->poll);
|
|
}
|
|
|
|
static void cpsw_mdio_sw_set_bit(struct cpsw_mdio *mdio,
|
|
enum cpsw_mdio_manual bit)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = readl(&mdio->regs->manualif);
|
|
|
|
switch (bit) {
|
|
case MDIO_OE:
|
|
reg |= MDIO_MAN_OE;
|
|
writel(reg, &mdio->regs->manualif);
|
|
break;
|
|
case MDIO_PIN:
|
|
reg |= MDIO_MAN_PIN;
|
|
writel(reg, &mdio->regs->manualif);
|
|
break;
|
|
case MDIO_MDCLK:
|
|
reg |= MDIO_MAN_MDCLK_O;
|
|
writel(reg, &mdio->regs->manualif);
|
|
break;
|
|
default:
|
|
break;
|
|
};
|
|
}
|
|
|
|
static void cpsw_mdio_sw_clr_bit(struct cpsw_mdio *mdio,
|
|
enum cpsw_mdio_manual bit)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = readl(&mdio->regs->manualif);
|
|
|
|
switch (bit) {
|
|
case MDIO_OE:
|
|
reg &= ~MDIO_MAN_OE;
|
|
writel(reg, &mdio->regs->manualif);
|
|
break;
|
|
case MDIO_PIN:
|
|
reg &= ~MDIO_MAN_PIN;
|
|
writel(reg, &mdio->regs->manualif);
|
|
break;
|
|
case MDIO_MDCLK:
|
|
reg = readl(&mdio->regs->manualif);
|
|
reg &= ~MDIO_MAN_MDCLK_O;
|
|
writel(reg, &mdio->regs->manualif);
|
|
break;
|
|
default:
|
|
break;
|
|
};
|
|
}
|
|
|
|
static int cpsw_mdio_test_man_bit(struct cpsw_mdio *mdio,
|
|
enum cpsw_mdio_manual bit)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = readl(&mdio->regs->manualif);
|
|
return test_bit(bit, ®);
|
|
}
|
|
|
|
static void cpsw_mdio_toggle_man_bit(struct cpsw_mdio *mdio,
|
|
enum cpsw_mdio_manual bit)
|
|
{
|
|
cpsw_mdio_sw_clr_bit(mdio, bit);
|
|
cpsw_mdio_sw_set_bit(mdio, bit);
|
|
}
|
|
|
|
static void cpsw_mdio_man_send_pattern(struct cpsw_mdio *mdio,
|
|
u32 bitrange, u32 val)
|
|
{
|
|
u32 i;
|
|
|
|
for (i = bitrange; i; i = i >> 1) {
|
|
if (i & val)
|
|
cpsw_mdio_sw_set_bit(mdio, MDIO_PIN);
|
|
else
|
|
cpsw_mdio_sw_clr_bit(mdio, MDIO_PIN);
|
|
|
|
cpsw_mdio_toggle_man_bit(mdio, MDIO_MDCLK);
|
|
}
|
|
}
|
|
|
|
static void cpsw_mdio_sw_preamble(struct cpsw_mdio *mdio)
|
|
{
|
|
u32 i;
|
|
|
|
cpsw_mdio_sw_clr_bit(mdio, MDIO_OE);
|
|
|
|
cpsw_mdio_sw_clr_bit(mdio, MDIO_MDCLK);
|
|
cpsw_mdio_sw_clr_bit(mdio, MDIO_MDCLK);
|
|
cpsw_mdio_sw_clr_bit(mdio, MDIO_MDCLK);
|
|
cpsw_mdio_sw_set_bit(mdio, MDIO_MDCLK);
|
|
|
|
for (i = 0; i < 32; i++) {
|
|
cpsw_mdio_sw_clr_bit(mdio, MDIO_MDCLK);
|
|
cpsw_mdio_sw_clr_bit(mdio, MDIO_MDCLK);
|
|
cpsw_mdio_sw_clr_bit(mdio, MDIO_MDCLK);
|
|
cpsw_mdio_toggle_man_bit(mdio, MDIO_MDCLK);
|
|
}
|
|
}
|
|
|
|
static int cpsw_mdio_sw_read(struct mii_dev *bus, int phy_id,
|
|
int dev_addr, int phy_reg)
|
|
{
|
|
struct cpsw_mdio *mdio = bus->priv;
|
|
u32 reg, i;
|
|
u8 ack;
|
|
|
|
if (phy_reg & ~PHY_REG_MASK || phy_id & ~PHY_ID_MASK)
|
|
return -EINVAL;
|
|
|
|
cpsw_mdio_disable(mdio);
|
|
cpsw_mdio_enable_manual_mode(mdio);
|
|
cpsw_mdio_sw_preamble(mdio);
|
|
|
|
cpsw_mdio_sw_clr_bit(mdio, MDIO_MDCLK);
|
|
cpsw_mdio_sw_set_bit(mdio, MDIO_OE);
|
|
|
|
/* Issue clause 22 MII read function {0,1,1,0} */
|
|
cpsw_mdio_man_send_pattern(mdio, C22_BITRANGE, C22_READ_PATTERN);
|
|
|
|
/* Send the device number MSB first */
|
|
cpsw_mdio_man_send_pattern(mdio, PHY_BITRANGE, phy_id);
|
|
|
|
/* Send the register number MSB first */
|
|
cpsw_mdio_man_send_pattern(mdio, PHY_BITRANGE, phy_reg);
|
|
|
|
/* Send turn around cycles */
|
|
cpsw_mdio_sw_clr_bit(mdio, MDIO_OE);
|
|
|
|
cpsw_mdio_toggle_man_bit(mdio, MDIO_MDCLK);
|
|
|
|
ack = cpsw_mdio_test_man_bit(mdio, MDIO_PIN);
|
|
cpsw_mdio_toggle_man_bit(mdio, MDIO_MDCLK);
|
|
|
|
reg = 0;
|
|
if (ack == 0) {
|
|
for (i = MDIO_BITRANGE; i; i = i >> 1) {
|
|
if (cpsw_mdio_test_man_bit(mdio, MDIO_PIN))
|
|
reg |= i;
|
|
|
|
cpsw_mdio_toggle_man_bit(mdio, MDIO_MDCLK);
|
|
}
|
|
} else {
|
|
for (i = MDIO_BITRANGE; i; i = i >> 1)
|
|
cpsw_mdio_toggle_man_bit(mdio, MDIO_MDCLK);
|
|
|
|
reg = 0xFFFF;
|
|
}
|
|
|
|
cpsw_mdio_sw_clr_bit(mdio, MDIO_MDCLK);
|
|
cpsw_mdio_sw_set_bit(mdio, MDIO_MDCLK);
|
|
cpsw_mdio_sw_set_bit(mdio, MDIO_MDCLK);
|
|
cpsw_mdio_toggle_man_bit(mdio, MDIO_MDCLK);
|
|
|
|
return reg;
|
|
}
|
|
|
|
static int cpsw_mdio_sw_write(struct mii_dev *bus, int phy_id,
|
|
int dev_addr, int phy_reg, u16 phy_data)
|
|
{
|
|
struct cpsw_mdio *mdio = bus->priv;
|
|
|
|
if ((phy_reg & ~PHY_REG_MASK) || (phy_id & ~PHY_ID_MASK))
|
|
return -EINVAL;
|
|
|
|
cpsw_mdio_disable(mdio);
|
|
cpsw_mdio_enable_manual_mode(mdio);
|
|
cpsw_mdio_sw_preamble(mdio);
|
|
|
|
cpsw_mdio_sw_clr_bit(mdio, MDIO_MDCLK);
|
|
cpsw_mdio_sw_set_bit(mdio, MDIO_OE);
|
|
|
|
/* Issue clause 22 MII write function {0,1,0,1} */
|
|
cpsw_mdio_man_send_pattern(mdio, C22_BITRANGE, C22_WRITE_PATTERN);
|
|
|
|
/* Send the device number MSB first */
|
|
cpsw_mdio_man_send_pattern(mdio, PHY_BITRANGE, phy_id);
|
|
|
|
/* Send the register number MSB first */
|
|
cpsw_mdio_man_send_pattern(mdio, PHY_BITRANGE, phy_reg);
|
|
|
|
/* set turn-around cycles */
|
|
cpsw_mdio_sw_set_bit(mdio, MDIO_PIN);
|
|
cpsw_mdio_toggle_man_bit(mdio, MDIO_MDCLK);
|
|
cpsw_mdio_sw_clr_bit(mdio, MDIO_PIN);
|
|
cpsw_mdio_toggle_man_bit(mdio, MDIO_MDCLK);
|
|
|
|
/* Send Register data MSB first */
|
|
cpsw_mdio_man_send_pattern(mdio, PHY_DATA_BITRANGE, phy_data);
|
|
cpsw_mdio_sw_clr_bit(mdio, MDIO_OE);
|
|
|
|
cpsw_mdio_sw_clr_bit(mdio, MDIO_MDCLK);
|
|
cpsw_mdio_sw_clr_bit(mdio, MDIO_MDCLK);
|
|
cpsw_mdio_sw_clr_bit(mdio, MDIO_MDCLK);
|
|
cpsw_mdio_toggle_man_bit(mdio, MDIO_MDCLK);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* wait until hardware is ready for another user access */
|
|
static int cpsw_mdio_wait_for_user_access(struct cpsw_mdio *mdio)
|
|
{
|
|
return wait_for_bit_le32(&mdio->regs->user[0].access,
|
|
USERACCESS_GO, false,
|
|
CPSW_MDIO_TIMEOUT, false);
|
|
}
|
|
|
|
static int cpsw_mdio_read(struct mii_dev *bus, int phy_id,
|
|
int dev_addr, int phy_reg)
|
|
{
|
|
struct cpsw_mdio *mdio = bus->priv;
|
|
int data, ret;
|
|
u32 reg;
|
|
|
|
if (phy_reg & ~PHY_REG_MASK || phy_id & ~PHY_ID_MASK)
|
|
return -EINVAL;
|
|
|
|
ret = cpsw_mdio_wait_for_user_access(mdio);
|
|
if (ret)
|
|
return ret;
|
|
reg = (USERACCESS_GO | USERACCESS_READ |
|
|
(phy_reg << USERACCESS_PHY_REG_SHIFT) |
|
|
(phy_id << USERACCESS_PHY_ADDR_SHIFT));
|
|
writel(reg, &mdio->regs->user[0].access);
|
|
ret = cpsw_mdio_wait_for_user_access(mdio);
|
|
if (ret)
|
|
return ret;
|
|
|
|
reg = readl(&mdio->regs->user[0].access);
|
|
data = (reg & USERACCESS_ACK) ? (reg & USERACCESS_DATA) : -1;
|
|
return data;
|
|
}
|
|
|
|
static int cpsw_mdio_write(struct mii_dev *bus, int phy_id, int dev_addr,
|
|
int phy_reg, u16 data)
|
|
{
|
|
struct cpsw_mdio *mdio = bus->priv;
|
|
u32 reg;
|
|
int ret;
|
|
|
|
if (phy_reg & ~PHY_REG_MASK || phy_id & ~PHY_ID_MASK)
|
|
return -EINVAL;
|
|
|
|
ret = cpsw_mdio_wait_for_user_access(mdio);
|
|
if (ret)
|
|
return ret;
|
|
reg = (USERACCESS_GO | USERACCESS_WRITE |
|
|
(phy_reg << USERACCESS_PHY_REG_SHIFT) |
|
|
(phy_id << USERACCESS_PHY_ADDR_SHIFT) |
|
|
(data & USERACCESS_DATA));
|
|
writel(reg, &mdio->regs->user[0].access);
|
|
|
|
return cpsw_mdio_wait_for_user_access(mdio);
|
|
}
|
|
|
|
u32 cpsw_mdio_get_alive(struct mii_dev *bus)
|
|
{
|
|
struct cpsw_mdio *mdio = bus->priv;
|
|
u32 val;
|
|
|
|
val = readl(&mdio->regs->control);
|
|
return val & GENMASK(15, 0);
|
|
}
|
|
|
|
struct mii_dev *cpsw_mdio_init(const char *name, phys_addr_t mdio_base,
|
|
u32 bus_freq, int fck_freq, bool manual_mode)
|
|
{
|
|
struct cpsw_mdio *cpsw_mdio;
|
|
int ret;
|
|
|
|
cpsw_mdio = calloc(1, sizeof(*cpsw_mdio));
|
|
if (!cpsw_mdio) {
|
|
debug("failed to alloc cpsw_mdio\n");
|
|
return NULL;
|
|
}
|
|
|
|
cpsw_mdio->bus = mdio_alloc();
|
|
if (!cpsw_mdio->bus) {
|
|
debug("failed to alloc mii bus\n");
|
|
free(cpsw_mdio);
|
|
return NULL;
|
|
}
|
|
|
|
cpsw_mdio->regs = (struct cpsw_mdio_regs *)(uintptr_t)mdio_base;
|
|
|
|
if (!bus_freq || !fck_freq)
|
|
cpsw_mdio->div = CPSW_MDIO_DIV_DEF;
|
|
else
|
|
cpsw_mdio->div = (fck_freq / bus_freq) - 1;
|
|
cpsw_mdio->div &= CONTROL_DIV_MASK;
|
|
|
|
/* set enable and clock divider */
|
|
writel(cpsw_mdio->div | CONTROL_ENABLE | CONTROL_FAULT |
|
|
CONTROL_FAULT_ENABLE, &cpsw_mdio->regs->control);
|
|
wait_for_bit_le32(&cpsw_mdio->regs->control,
|
|
CONTROL_IDLE, false, CPSW_MDIO_TIMEOUT, true);
|
|
|
|
/*
|
|
* wait for scan logic to settle:
|
|
* the scan time consists of (a) a large fixed component, and (b) a
|
|
* small component that varies with the mii bus frequency. These
|
|
* were estimated using measurements at 1.1 and 2.2 MHz on tnetv107x
|
|
* silicon. Since the effect of (b) was found to be largely
|
|
* negligible, we keep things simple here.
|
|
*/
|
|
mdelay(1);
|
|
|
|
if (manual_mode) {
|
|
cpsw_mdio->bus->read = cpsw_mdio_sw_read;
|
|
cpsw_mdio->bus->write = cpsw_mdio_sw_write;
|
|
} else {
|
|
cpsw_mdio->bus->read = cpsw_mdio_read;
|
|
cpsw_mdio->bus->write = cpsw_mdio_write;
|
|
}
|
|
|
|
cpsw_mdio->bus->priv = cpsw_mdio;
|
|
snprintf(cpsw_mdio->bus->name, sizeof(cpsw_mdio->bus->name), name);
|
|
|
|
ret = mdio_register(cpsw_mdio->bus);
|
|
if (ret < 0) {
|
|
debug("failed to register mii bus\n");
|
|
goto free_bus;
|
|
}
|
|
|
|
return cpsw_mdio->bus;
|
|
|
|
free_bus:
|
|
mdio_free(cpsw_mdio->bus);
|
|
free(cpsw_mdio);
|
|
return NULL;
|
|
}
|
|
|
|
void cpsw_mdio_free(struct mii_dev *bus)
|
|
{
|
|
struct cpsw_mdio *mdio = bus->priv;
|
|
u32 reg;
|
|
|
|
/* disable mdio */
|
|
reg = readl(&mdio->regs->control);
|
|
reg &= ~CONTROL_ENABLE;
|
|
writel(reg, &mdio->regs->control);
|
|
|
|
mdio_unregister(bus);
|
|
mdio_free(bus);
|
|
free(mdio);
|
|
}
|