mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-01 00:49:43 +00:00
003b09dad4
Fix big/small letters in comment. Signed-off-by: Pavel Machek <pavel@denx.de> Tested-by: Marek Vasut <marex@denx.de>
250 lines
7.2 KiB
ArmAsm
250 lines
7.2 KiB
ArmAsm
/*
|
|
* armboot - Startup Code for OMAP3530/ARM Cortex CPU-core
|
|
*
|
|
* Copyright (c) 2004 Texas Instruments <r-woodruff2@ti.com>
|
|
*
|
|
* Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
|
|
* Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
|
|
* Copyright (c) 2002 Gary Jennejohn <garyj@denx.de>
|
|
* Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com>
|
|
* Copyright (c) 2003 Kshitij <kshitij@ti.com>
|
|
* Copyright (c) 2006-2008 Syed Mohammed Khasim <x0khasim@ti.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <asm-offsets.h>
|
|
#include <config.h>
|
|
#include <asm/system.h>
|
|
#include <linux/linkage.h>
|
|
|
|
/*************************************************************************
|
|
*
|
|
* Startup Code (reset vector)
|
|
*
|
|
* Do important init only if we don't start from memory!
|
|
* Setup memory and board specific bits prior to relocation.
|
|
* Relocate armboot to ram. Setup stack.
|
|
*
|
|
*************************************************************************/
|
|
|
|
.globl reset
|
|
.globl save_boot_params_ret
|
|
|
|
reset:
|
|
/* Allow the board to save important registers */
|
|
b save_boot_params
|
|
save_boot_params_ret:
|
|
/*
|
|
* disable interrupts (FIQ and IRQ), also set the cpu to SVC32 mode,
|
|
* except if in HYP mode already
|
|
*/
|
|
mrs r0, cpsr
|
|
and r1, r0, #0x1f @ mask mode bits
|
|
teq r1, #0x1a @ test for HYP mode
|
|
bicne r0, r0, #0x1f @ clear all mode bits
|
|
orrne r0, r0, #0x13 @ set SVC mode
|
|
orr r0, r0, #0xc0 @ disable FIQ and IRQ
|
|
msr cpsr,r0
|
|
|
|
/*
|
|
* Setup vector:
|
|
* (OMAP4 spl TEXT_BASE is not 32 byte aligned.
|
|
* Continue to use ROM code vector only in OMAP4 spl)
|
|
*/
|
|
#if !(defined(CONFIG_OMAP44XX) && defined(CONFIG_SPL_BUILD))
|
|
/* Set V=0 in CP15 SCTLR register - for VBAR to point to vector */
|
|
mrc p15, 0, r0, c1, c0, 0 @ Read CP15 SCTLR Register
|
|
bic r0, #CR_V @ V = 0
|
|
mcr p15, 0, r0, c1, c0, 0 @ Write CP15 SCTLR Register
|
|
|
|
/* Set vector address in CP15 VBAR register */
|
|
ldr r0, =_start
|
|
mcr p15, 0, r0, c12, c0, 0 @Set VBAR
|
|
#endif
|
|
|
|
/* the mask ROM code should have PLL and others stable */
|
|
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
|
|
bl cpu_init_cp15
|
|
bl cpu_init_crit
|
|
#endif
|
|
|
|
bl _main
|
|
|
|
/*------------------------------------------------------------------------------*/
|
|
|
|
ENTRY(c_runtime_cpu_setup)
|
|
/*
|
|
* If I-cache is enabled invalidate it
|
|
*/
|
|
#ifndef CONFIG_SYS_ICACHE_OFF
|
|
mcr p15, 0, r0, c7, c5, 0 @ invalidate icache
|
|
mcr p15, 0, r0, c7, c10, 4 @ DSB
|
|
mcr p15, 0, r0, c7, c5, 4 @ ISB
|
|
#endif
|
|
|
|
bx lr
|
|
|
|
ENDPROC(c_runtime_cpu_setup)
|
|
|
|
/*************************************************************************
|
|
*
|
|
* void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3)
|
|
* __attribute__((weak));
|
|
*
|
|
* Stack pointer is not yet initialized at this moment
|
|
* Don't save anything to stack even if compiled with -O0
|
|
*
|
|
*************************************************************************/
|
|
ENTRY(save_boot_params)
|
|
b save_boot_params_ret @ back to my caller
|
|
ENDPROC(save_boot_params)
|
|
.weak save_boot_params
|
|
|
|
/*************************************************************************
|
|
*
|
|
* cpu_init_cp15
|
|
*
|
|
* Setup CP15 registers (cache, MMU, TLBs). The I-cache is turned on unless
|
|
* CONFIG_SYS_ICACHE_OFF is defined.
|
|
*
|
|
*************************************************************************/
|
|
ENTRY(cpu_init_cp15)
|
|
/*
|
|
* Invalidate L1 I/D
|
|
*/
|
|
mov r0, #0 @ set up for MCR
|
|
mcr p15, 0, r0, c8, c7, 0 @ invalidate TLBs
|
|
mcr p15, 0, r0, c7, c5, 0 @ invalidate icache
|
|
mcr p15, 0, r0, c7, c5, 6 @ invalidate BP array
|
|
mcr p15, 0, r0, c7, c10, 4 @ DSB
|
|
mcr p15, 0, r0, c7, c5, 4 @ ISB
|
|
|
|
/*
|
|
* disable MMU stuff and caches
|
|
*/
|
|
mrc p15, 0, r0, c1, c0, 0
|
|
bic r0, r0, #0x00002000 @ clear bits 13 (--V-)
|
|
bic r0, r0, #0x00000007 @ clear bits 2:0 (-CAM)
|
|
orr r0, r0, #0x00000002 @ set bit 1 (--A-) Align
|
|
orr r0, r0, #0x00000800 @ set bit 11 (Z---) BTB
|
|
#ifdef CONFIG_SYS_ICACHE_OFF
|
|
bic r0, r0, #0x00001000 @ clear bit 12 (I) I-cache
|
|
#else
|
|
orr r0, r0, #0x00001000 @ set bit 12 (I) I-cache
|
|
#endif
|
|
mcr p15, 0, r0, c1, c0, 0
|
|
|
|
#ifdef CONFIG_ARM_ERRATA_716044
|
|
mrc p15, 0, r0, c1, c0, 0 @ read system control register
|
|
orr r0, r0, #1 << 11 @ set bit #11
|
|
mcr p15, 0, r0, c1, c0, 0 @ write system control register
|
|
#endif
|
|
|
|
#if (defined(CONFIG_ARM_ERRATA_742230) || defined(CONFIG_ARM_ERRATA_794072))
|
|
mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register
|
|
orr r0, r0, #1 << 4 @ set bit #4
|
|
mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register
|
|
#endif
|
|
|
|
#ifdef CONFIG_ARM_ERRATA_743622
|
|
mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register
|
|
orr r0, r0, #1 << 6 @ set bit #6
|
|
mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register
|
|
#endif
|
|
|
|
#ifdef CONFIG_ARM_ERRATA_751472
|
|
mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register
|
|
orr r0, r0, #1 << 11 @ set bit #11
|
|
mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register
|
|
#endif
|
|
#ifdef CONFIG_ARM_ERRATA_761320
|
|
mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register
|
|
orr r0, r0, #1 << 21 @ set bit #21
|
|
mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register
|
|
#endif
|
|
|
|
mov r5, lr @ Store my Caller
|
|
mrc p15, 0, r1, c0, c0, 0 @ r1 has Read Main ID Register (MIDR)
|
|
mov r3, r1, lsr #20 @ get variant field
|
|
and r3, r3, #0xf @ r3 has CPU variant
|
|
and r4, r1, #0xf @ r4 has CPU revision
|
|
mov r2, r3, lsl #4 @ shift variant field for combined value
|
|
orr r2, r4, r2 @ r2 has combined CPU variant + revision
|
|
|
|
#ifdef CONFIG_ARM_ERRATA_798870
|
|
cmp r2, #0x30 @ Applies to lower than R3p0
|
|
bge skip_errata_798870 @ skip if not affected rev
|
|
cmp r2, #0x20 @ Applies to including and above R2p0
|
|
blt skip_errata_798870 @ skip if not affected rev
|
|
|
|
mrc p15, 1, r0, c15, c0, 0 @ read l2 aux ctrl reg
|
|
orr r0, r0, #1 << 7 @ Enable hazard-detect timeout
|
|
push {r1-r5} @ Save the cpu info registers
|
|
bl v7_arch_cp15_set_l2aux_ctrl
|
|
isb @ Recommended ISB after l2actlr update
|
|
pop {r1-r5} @ Restore the cpu info - fall through
|
|
skip_errata_798870:
|
|
#endif
|
|
|
|
#ifdef CONFIG_ARM_ERRATA_454179
|
|
cmp r2, #0x21 @ Only on < r2p1
|
|
bge skip_errata_454179
|
|
|
|
mrc p15, 0, r0, c1, c0, 1 @ Read ACR
|
|
orr r0, r0, #(0x3 << 6) @ Set DBSM(BIT7) and IBE(BIT6) bits
|
|
push {r1-r5} @ Save the cpu info registers
|
|
bl v7_arch_cp15_set_acr
|
|
pop {r1-r5} @ Restore the cpu info - fall through
|
|
|
|
skip_errata_454179:
|
|
#endif
|
|
|
|
#ifdef CONFIG_ARM_ERRATA_430973
|
|
cmp r2, #0x21 @ Only on < r2p1
|
|
bge skip_errata_430973
|
|
|
|
mrc p15, 0, r0, c1, c0, 1 @ Read ACR
|
|
orr r0, r0, #(0x1 << 6) @ Set IBE bit
|
|
push {r1-r5} @ Save the cpu info registers
|
|
bl v7_arch_cp15_set_acr
|
|
pop {r1-r5} @ Restore the cpu info - fall through
|
|
|
|
skip_errata_430973:
|
|
#endif
|
|
|
|
#ifdef CONFIG_ARM_ERRATA_621766
|
|
cmp r2, #0x21 @ Only on < r2p1
|
|
bge skip_errata_621766
|
|
|
|
mrc p15, 0, r0, c1, c0, 1 @ Read ACR
|
|
orr r0, r0, #(0x1 << 5) @ Set L1NEON bit
|
|
push {r1-r5} @ Save the cpu info registers
|
|
bl v7_arch_cp15_set_acr
|
|
pop {r1-r5} @ Restore the cpu info - fall through
|
|
|
|
skip_errata_621766:
|
|
#endif
|
|
|
|
mov pc, r5 @ back to my caller
|
|
ENDPROC(cpu_init_cp15)
|
|
|
|
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
|
|
/*************************************************************************
|
|
*
|
|
* CPU_init_critical registers
|
|
*
|
|
* setup important registers
|
|
* setup memory timing
|
|
*
|
|
*************************************************************************/
|
|
ENTRY(cpu_init_crit)
|
|
/*
|
|
* Jump to board specific initialization...
|
|
* The Mask ROM will have already initialized
|
|
* basic memory. Go here to bump up clock rate and handle
|
|
* wake up conditions.
|
|
*/
|
|
b lowlevel_init @ go setup pll,mux,memory
|
|
ENDPROC(cpu_init_crit)
|
|
#endif
|