mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 02:38:56 +00:00
f38f5f4bcf
This patch adds board support for the Toradex Apalis TK1 a computer on module which can be used on different carrier boards. The module consists of a Tegra TK1 SoC, a PMIC solution, 2 GB of DDR3L RAM, a bunch of level shifters, an eMMC, a TMP451 temperature sensor chip, an I210 gigabit Ethernet controller and a SGTL5000 audio codec. Furthermore, there is a Kinetis MK20DN512 companion micro controller for analogue, CAN and resistive touch functionality. For the sake of ease of use we do not distinguish between different carrier boards for now as the base module features are deemed sufficient enough for regular booting. The following functionality is working so far: - eMMC boot, environment storage and Toradex factory config block - Gigabit Ethernet - MMC/SD cards (both MMC1 as well as SD1 slot) - USB client/host (dual role OTG port as client e.g. for DFU/UMS or host, other two ports as host) Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
175 lines
4.1 KiB
C
175 lines
4.1 KiB
C
/*
|
|
* Copyright (c) 2016 Toradex, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/arch-tegra/ap.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/pinmux.h>
|
|
#include <power/as3722.h>
|
|
|
|
#include "../common/tdx-common.h"
|
|
#include "pinmux-config-apalis-tk1.h"
|
|
|
|
#define LAN_RESET_N TEGRA_GPIO(S, 2)
|
|
|
|
int arch_misc_init(void)
|
|
{
|
|
if (readl(NV_PA_BASE_SRAM + NVBOOTINFOTABLE_BOOTTYPE) ==
|
|
NVBOOTTYPE_RECOVERY)
|
|
printf("USB recovery mode\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
puts("Model: Toradex Apalis TK1 2GB\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
|
|
int ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
return ft_common_board_setup(blob, bd);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Routine: pinmux_init
|
|
* Description: Do individual peripheral pinmux configs
|
|
*/
|
|
void pinmux_init(void)
|
|
{
|
|
pinmux_clear_tristate_input_clamping();
|
|
|
|
gpio_config_table(apalis_tk1_gpio_inits,
|
|
ARRAY_SIZE(apalis_tk1_gpio_inits));
|
|
|
|
pinmux_config_pingrp_table(apalis_tk1_pingrps,
|
|
ARRAY_SIZE(apalis_tk1_pingrps));
|
|
|
|
pinmux_config_drvgrp_table(apalis_tk1_drvgrps,
|
|
ARRAY_SIZE(apalis_tk1_drvgrps));
|
|
}
|
|
|
|
#ifdef CONFIG_PCI_TEGRA
|
|
int tegra_pcie_board_init(void)
|
|
{
|
|
struct udevice *pmic;
|
|
int err;
|
|
|
|
err = as3722_init(&pmic);
|
|
if (err) {
|
|
error("failed to initialize AS3722 PMIC: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
err = as3722_sd_enable(pmic, 4);
|
|
if (err < 0) {
|
|
error("failed to enable SD4: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
err = as3722_sd_set_voltage(pmic, 4, 0x24);
|
|
if (err < 0) {
|
|
error("failed to set SD4 voltage: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
err = as3722_gpio_configure(pmic, 1, AS3722_GPIO_OUTPUT_VDDH |
|
|
AS3722_GPIO_INVERT);
|
|
if (err < 0) {
|
|
error("failed to configure GPIO#1 as output: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
err = as3722_gpio_direction_output(pmic, 2, 1);
|
|
if (err < 0) {
|
|
error("failed to set GPIO#2 high: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
/* Reset I210 Gigabit Ethernet Controller */
|
|
gpio_request(LAN_RESET_N, "LAN_RESET_N");
|
|
gpio_direction_output(LAN_RESET_N, 0);
|
|
|
|
/*
|
|
* Make sure we don't get any back feeding from LAN_WAKE_N resp.
|
|
* DEV_OFF_N
|
|
*/
|
|
gpio_request(TEGRA_GPIO(O, 5), "LAN_WAKE_N");
|
|
gpio_direction_output(TEGRA_GPIO(O, 5), 0);
|
|
|
|
gpio_request(TEGRA_GPIO(O, 6), "LAN_DEV_OFF_N");
|
|
gpio_direction_output(TEGRA_GPIO(O, 6), 0);
|
|
|
|
/* Make sure LDO9 and LDO10 are initially enabled @ 0V */
|
|
err = as3722_ldo_enable(pmic, 9);
|
|
if (err < 0) {
|
|
error("failed to enable LDO9: %d\n", err);
|
|
return err;
|
|
}
|
|
err = as3722_ldo_enable(pmic, 10);
|
|
if (err < 0) {
|
|
error("failed to enable LDO10: %d\n", err);
|
|
return err;
|
|
}
|
|
err = as3722_ldo_set_voltage(pmic, 9, 0x80);
|
|
if (err < 0) {
|
|
error("failed to set LDO9 voltage: %d\n", err);
|
|
return err;
|
|
}
|
|
err = as3722_ldo_set_voltage(pmic, 10, 0x80);
|
|
if (err < 0) {
|
|
error("failed to set LDO10 voltage: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
mdelay(100);
|
|
|
|
/* Make sure controller gets enabled by disabling DEV_OFF_N */
|
|
gpio_set_value(TEGRA_GPIO(O, 6), 1);
|
|
|
|
/* Enable LDO9 and LDO10 for +V3.3_ETH on patched prototypes */
|
|
err = as3722_ldo_set_voltage(pmic, 9, 0xff);
|
|
if (err < 0) {
|
|
error("failed to set LDO9 voltage: %d\n", err);
|
|
return err;
|
|
}
|
|
err = as3722_ldo_set_voltage(pmic, 10, 0xff);
|
|
if (err < 0) {
|
|
error("failed to set LDO10 voltage: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
mdelay(100);
|
|
gpio_set_value(LAN_RESET_N, 1);
|
|
|
|
#ifdef APALIS_TK1_PCIE_EVALBOARD_INIT
|
|
#define PEX_PERST_N TEGRA_GPIO(DD, 1) /* Apalis GPIO7 */
|
|
#define RESET_MOCI_CTRL TEGRA_GPIO(U, 4)
|
|
|
|
/* Reset PLX PEX 8605 PCIe Switch plus PCIe devices on Apalis Evaluation
|
|
Board */
|
|
gpio_request(PEX_PERST_N, "PEX_PERST_N");
|
|
gpio_request(RESET_MOCI_CTRL, "RESET_MOCI_CTRL");
|
|
gpio_direction_output(PEX_PERST_N, 0);
|
|
gpio_direction_output(RESET_MOCI_CTRL, 0);
|
|
/* Must be asserted for 100 ms after power and clocks are stable */
|
|
mdelay(100);
|
|
gpio_set_value(PEX_PERST_N, 1);
|
|
/* Err_5: PEX_REFCLK_OUTpx/nx Clock Outputs is not Guaranteed Until
|
|
900 us After PEX_PERST# De-assertion */
|
|
mdelay(1);
|
|
gpio_set_value(RESET_MOCI_CTRL, 1);
|
|
#endif /* APALIS_T30_PCIE_EVALBOARD_INIT */
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_PCI_TEGRA */
|