mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 09:48:16 +00:00
967325feb2
This is necessary for the device-model enabled builds to work properly. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Simon Glass <sjg@chromium.org>
412 lines
10 KiB
C
412 lines
10 KiB
C
/*
|
|
* (C) Copyright 2007-2011
|
|
* Allwinner Technology Co., Ltd. <www.allwinnertech.com>
|
|
* Aaron <leafy.myeh@allwinnertech.com>
|
|
*
|
|
* MMC driver for allwinner sunxi platform.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <malloc.h>
|
|
#include <mmc.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/mmc.h>
|
|
#include <asm-generic/gpio.h>
|
|
|
|
struct sunxi_mmc_host {
|
|
unsigned mmc_no;
|
|
uint32_t *mclkreg;
|
|
unsigned fatal_err;
|
|
unsigned mod_clk;
|
|
struct sunxi_mmc *reg;
|
|
struct mmc_config cfg;
|
|
};
|
|
|
|
/* support 4 mmc hosts */
|
|
struct sunxi_mmc_host mmc_host[4];
|
|
|
|
static int sunxi_mmc_getcd_gpio(int sdc_no)
|
|
{
|
|
switch (sdc_no) {
|
|
case 0: return sunxi_name_to_gpio(CONFIG_MMC0_CD_PIN);
|
|
case 1: return sunxi_name_to_gpio(CONFIG_MMC1_CD_PIN);
|
|
case 2: return sunxi_name_to_gpio(CONFIG_MMC2_CD_PIN);
|
|
case 3: return sunxi_name_to_gpio(CONFIG_MMC3_CD_PIN);
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
static int mmc_resource_init(int sdc_no)
|
|
{
|
|
struct sunxi_mmc_host *mmchost = &mmc_host[sdc_no];
|
|
struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
|
|
int cd_pin, ret = 0;
|
|
|
|
debug("init mmc %d resource\n", sdc_no);
|
|
|
|
switch (sdc_no) {
|
|
case 0:
|
|
mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC0_BASE;
|
|
mmchost->mclkreg = &ccm->sd0_clk_cfg;
|
|
break;
|
|
case 1:
|
|
mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC1_BASE;
|
|
mmchost->mclkreg = &ccm->sd1_clk_cfg;
|
|
break;
|
|
case 2:
|
|
mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC2_BASE;
|
|
mmchost->mclkreg = &ccm->sd2_clk_cfg;
|
|
break;
|
|
case 3:
|
|
mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC3_BASE;
|
|
mmchost->mclkreg = &ccm->sd3_clk_cfg;
|
|
break;
|
|
default:
|
|
printf("Wrong mmc number %d\n", sdc_no);
|
|
return -1;
|
|
}
|
|
mmchost->mmc_no = sdc_no;
|
|
|
|
cd_pin = sunxi_mmc_getcd_gpio(sdc_no);
|
|
if (cd_pin != -1)
|
|
ret = gpio_request(cd_pin, "mmc_cd");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mmc_clk_io_on(int sdc_no)
|
|
{
|
|
unsigned int pll_clk;
|
|
unsigned int divider;
|
|
struct sunxi_mmc_host *mmchost = &mmc_host[sdc_no];
|
|
struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
|
|
|
|
debug("init mmc %d clock and io\n", sdc_no);
|
|
|
|
/* config ahb clock */
|
|
setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MMC(sdc_no));
|
|
|
|
#if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN8I)
|
|
/* unassert reset */
|
|
setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MMC(sdc_no));
|
|
#endif
|
|
|
|
/* config mod clock */
|
|
pll_clk = clock_get_pll6();
|
|
/* should be close to 100 MHz but no more, so round up */
|
|
divider = ((pll_clk + 99999999) / 100000000) - 1;
|
|
writel(CCM_MMC_CTRL_ENABLE | CCM_MMC_CTRL_PLL6 | divider,
|
|
mmchost->mclkreg);
|
|
mmchost->mod_clk = pll_clk / (divider + 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mmc_update_clk(struct mmc *mmc)
|
|
{
|
|
struct sunxi_mmc_host *mmchost = mmc->priv;
|
|
unsigned int cmd;
|
|
unsigned timeout_msecs = 2000;
|
|
|
|
cmd = SUNXI_MMC_CMD_START |
|
|
SUNXI_MMC_CMD_UPCLK_ONLY |
|
|
SUNXI_MMC_CMD_WAIT_PRE_OVER;
|
|
writel(cmd, &mmchost->reg->cmd);
|
|
while (readl(&mmchost->reg->cmd) & SUNXI_MMC_CMD_START) {
|
|
if (!timeout_msecs--)
|
|
return -1;
|
|
udelay(1000);
|
|
}
|
|
|
|
/* clock update sets various irq status bits, clear these */
|
|
writel(readl(&mmchost->reg->rint), &mmchost->reg->rint);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mmc_config_clock(struct mmc *mmc, unsigned div)
|
|
{
|
|
struct sunxi_mmc_host *mmchost = mmc->priv;
|
|
unsigned rval = readl(&mmchost->reg->clkcr);
|
|
|
|
/* Disable Clock */
|
|
rval &= ~SUNXI_MMC_CLK_ENABLE;
|
|
writel(rval, &mmchost->reg->clkcr);
|
|
if (mmc_update_clk(mmc))
|
|
return -1;
|
|
|
|
/* Change Divider Factor */
|
|
rval &= ~SUNXI_MMC_CLK_DIVIDER_MASK;
|
|
rval |= div;
|
|
writel(rval, &mmchost->reg->clkcr);
|
|
if (mmc_update_clk(mmc))
|
|
return -1;
|
|
/* Re-enable Clock */
|
|
rval |= SUNXI_MMC_CLK_ENABLE;
|
|
writel(rval, &mmchost->reg->clkcr);
|
|
|
|
if (mmc_update_clk(mmc))
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mmc_set_ios(struct mmc *mmc)
|
|
{
|
|
struct sunxi_mmc_host *mmchost = mmc->priv;
|
|
unsigned int clkdiv = 0;
|
|
|
|
debug("set ios: bus_width: %x, clock: %d, mod_clk: %d\n",
|
|
mmc->bus_width, mmc->clock, mmchost->mod_clk);
|
|
|
|
/* Change clock first */
|
|
clkdiv = (mmchost->mod_clk + (mmc->clock >> 1)) / mmc->clock / 2;
|
|
if (mmc->clock) {
|
|
if (mmc_config_clock(mmc, clkdiv)) {
|
|
mmchost->fatal_err = 1;
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* Change bus width */
|
|
if (mmc->bus_width == 8)
|
|
writel(0x2, &mmchost->reg->width);
|
|
else if (mmc->bus_width == 4)
|
|
writel(0x1, &mmchost->reg->width);
|
|
else
|
|
writel(0x0, &mmchost->reg->width);
|
|
}
|
|
|
|
static int mmc_core_init(struct mmc *mmc)
|
|
{
|
|
struct sunxi_mmc_host *mmchost = mmc->priv;
|
|
|
|
/* Reset controller */
|
|
writel(SUNXI_MMC_GCTRL_RESET, &mmchost->reg->gctrl);
|
|
udelay(1000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mmc_trans_data_by_cpu(struct mmc *mmc, struct mmc_data *data)
|
|
{
|
|
struct sunxi_mmc_host *mmchost = mmc->priv;
|
|
const int reading = !!(data->flags & MMC_DATA_READ);
|
|
const uint32_t status_bit = reading ? SUNXI_MMC_STATUS_FIFO_EMPTY :
|
|
SUNXI_MMC_STATUS_FIFO_FULL;
|
|
unsigned i;
|
|
unsigned byte_cnt = data->blocksize * data->blocks;
|
|
unsigned timeout_msecs = 2000;
|
|
unsigned *buff = (unsigned int *)(reading ? data->dest : data->src);
|
|
|
|
/* Always read / write data through the CPU */
|
|
setbits_le32(&mmchost->reg->gctrl, SUNXI_MMC_GCTRL_ACCESS_BY_AHB);
|
|
|
|
for (i = 0; i < (byte_cnt >> 2); i++) {
|
|
while (readl(&mmchost->reg->status) & status_bit) {
|
|
if (!timeout_msecs--)
|
|
return -1;
|
|
udelay(1000);
|
|
}
|
|
|
|
if (reading)
|
|
buff[i] = readl(&mmchost->reg->fifo);
|
|
else
|
|
writel(buff[i], &mmchost->reg->fifo);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mmc_rint_wait(struct mmc *mmc, unsigned int timeout_msecs,
|
|
unsigned int done_bit, const char *what)
|
|
{
|
|
struct sunxi_mmc_host *mmchost = mmc->priv;
|
|
unsigned int status;
|
|
|
|
do {
|
|
status = readl(&mmchost->reg->rint);
|
|
if (!timeout_msecs-- ||
|
|
(status & SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT)) {
|
|
debug("%s timeout %x\n", what,
|
|
status & SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT);
|
|
return TIMEOUT;
|
|
}
|
|
udelay(1000);
|
|
} while (!(status & done_bit));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
|
|
struct mmc_data *data)
|
|
{
|
|
struct sunxi_mmc_host *mmchost = mmc->priv;
|
|
unsigned int cmdval = SUNXI_MMC_CMD_START;
|
|
unsigned int timeout_msecs;
|
|
int error = 0;
|
|
unsigned int status = 0;
|
|
unsigned int bytecnt = 0;
|
|
|
|
if (mmchost->fatal_err)
|
|
return -1;
|
|
if (cmd->resp_type & MMC_RSP_BUSY)
|
|
debug("mmc cmd %d check rsp busy\n", cmd->cmdidx);
|
|
if (cmd->cmdidx == 12)
|
|
return 0;
|
|
|
|
if (!cmd->cmdidx)
|
|
cmdval |= SUNXI_MMC_CMD_SEND_INIT_SEQ;
|
|
if (cmd->resp_type & MMC_RSP_PRESENT)
|
|
cmdval |= SUNXI_MMC_CMD_RESP_EXPIRE;
|
|
if (cmd->resp_type & MMC_RSP_136)
|
|
cmdval |= SUNXI_MMC_CMD_LONG_RESPONSE;
|
|
if (cmd->resp_type & MMC_RSP_CRC)
|
|
cmdval |= SUNXI_MMC_CMD_CHK_RESPONSE_CRC;
|
|
|
|
if (data) {
|
|
if ((u32) data->dest & 0x3) {
|
|
error = -1;
|
|
goto out;
|
|
}
|
|
|
|
cmdval |= SUNXI_MMC_CMD_DATA_EXPIRE|SUNXI_MMC_CMD_WAIT_PRE_OVER;
|
|
if (data->flags & MMC_DATA_WRITE)
|
|
cmdval |= SUNXI_MMC_CMD_WRITE;
|
|
if (data->blocks > 1)
|
|
cmdval |= SUNXI_MMC_CMD_AUTO_STOP;
|
|
writel(data->blocksize, &mmchost->reg->blksz);
|
|
writel(data->blocks * data->blocksize, &mmchost->reg->bytecnt);
|
|
}
|
|
|
|
debug("mmc %d, cmd %d(0x%08x), arg 0x%08x\n", mmchost->mmc_no,
|
|
cmd->cmdidx, cmdval | cmd->cmdidx, cmd->cmdarg);
|
|
writel(cmd->cmdarg, &mmchost->reg->arg);
|
|
|
|
if (!data)
|
|
writel(cmdval | cmd->cmdidx, &mmchost->reg->cmd);
|
|
|
|
/*
|
|
* transfer data and check status
|
|
* STATREG[2] : FIFO empty
|
|
* STATREG[3] : FIFO full
|
|
*/
|
|
if (data) {
|
|
int ret = 0;
|
|
|
|
bytecnt = data->blocksize * data->blocks;
|
|
debug("trans data %d bytes\n", bytecnt);
|
|
writel(cmdval | cmd->cmdidx, &mmchost->reg->cmd);
|
|
ret = mmc_trans_data_by_cpu(mmc, data);
|
|
if (ret) {
|
|
error = readl(&mmchost->reg->rint) & \
|
|
SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT;
|
|
error = TIMEOUT;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
error = mmc_rint_wait(mmc, 0xfffff, SUNXI_MMC_RINT_COMMAND_DONE, "cmd");
|
|
if (error)
|
|
goto out;
|
|
|
|
if (data) {
|
|
timeout_msecs = 120;
|
|
debug("cacl timeout %x msec\n", timeout_msecs);
|
|
error = mmc_rint_wait(mmc, timeout_msecs,
|
|
data->blocks > 1 ?
|
|
SUNXI_MMC_RINT_AUTO_COMMAND_DONE :
|
|
SUNXI_MMC_RINT_DATA_OVER,
|
|
"data");
|
|
if (error)
|
|
goto out;
|
|
}
|
|
|
|
if (cmd->resp_type & MMC_RSP_BUSY) {
|
|
timeout_msecs = 2000;
|
|
do {
|
|
status = readl(&mmchost->reg->status);
|
|
if (!timeout_msecs--) {
|
|
debug("busy timeout\n");
|
|
error = TIMEOUT;
|
|
goto out;
|
|
}
|
|
udelay(1000);
|
|
} while (status & SUNXI_MMC_STATUS_CARD_DATA_BUSY);
|
|
}
|
|
|
|
if (cmd->resp_type & MMC_RSP_136) {
|
|
cmd->response[0] = readl(&mmchost->reg->resp3);
|
|
cmd->response[1] = readl(&mmchost->reg->resp2);
|
|
cmd->response[2] = readl(&mmchost->reg->resp1);
|
|
cmd->response[3] = readl(&mmchost->reg->resp0);
|
|
debug("mmc resp 0x%08x 0x%08x 0x%08x 0x%08x\n",
|
|
cmd->response[3], cmd->response[2],
|
|
cmd->response[1], cmd->response[0]);
|
|
} else {
|
|
cmd->response[0] = readl(&mmchost->reg->resp0);
|
|
debug("mmc resp 0x%08x\n", cmd->response[0]);
|
|
}
|
|
out:
|
|
if (error < 0) {
|
|
writel(SUNXI_MMC_GCTRL_RESET, &mmchost->reg->gctrl);
|
|
mmc_update_clk(mmc);
|
|
}
|
|
writel(0xffffffff, &mmchost->reg->rint);
|
|
writel(readl(&mmchost->reg->gctrl) | SUNXI_MMC_GCTRL_FIFO_RESET,
|
|
&mmchost->reg->gctrl);
|
|
|
|
return error;
|
|
}
|
|
|
|
static int sunxi_mmc_getcd(struct mmc *mmc)
|
|
{
|
|
struct sunxi_mmc_host *mmchost = mmc->priv;
|
|
int cd_pin;
|
|
|
|
cd_pin = sunxi_mmc_getcd_gpio(mmchost->mmc_no);
|
|
if (cd_pin == -1)
|
|
return 1;
|
|
|
|
return !gpio_direction_input(cd_pin);
|
|
}
|
|
|
|
static const struct mmc_ops sunxi_mmc_ops = {
|
|
.send_cmd = mmc_send_cmd,
|
|
.set_ios = mmc_set_ios,
|
|
.init = mmc_core_init,
|
|
.getcd = sunxi_mmc_getcd,
|
|
};
|
|
|
|
struct mmc *sunxi_mmc_init(int sdc_no)
|
|
{
|
|
struct mmc_config *cfg = &mmc_host[sdc_no].cfg;
|
|
|
|
memset(&mmc_host[sdc_no], 0, sizeof(struct sunxi_mmc_host));
|
|
|
|
cfg->name = "SUNXI SD/MMC";
|
|
cfg->ops = &sunxi_mmc_ops;
|
|
|
|
cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
|
|
cfg->host_caps = MMC_MODE_4BIT;
|
|
cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
|
|
#if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN7I) || defined(CONFIG_MACH_SUN8I)
|
|
cfg->host_caps |= MMC_MODE_HC;
|
|
#endif
|
|
cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
|
|
|
|
cfg->f_min = 400000;
|
|
cfg->f_max = 52000000;
|
|
|
|
if (mmc_resource_init(sdc_no) != 0)
|
|
return NULL;
|
|
|
|
mmc_clk_io_on(sdc_no);
|
|
|
|
return mmc_create(cfg, &mmc_host[sdc_no]);
|
|
}
|