u-boot/tools/env
Grant Erickson f3b6d528e4 Fix Compilation Errors with 'tools/env/fw_printenv'
In the current top-of-tree, 1.3.3.-rc2, the optional tool
'tools/env/fw_printenv' fails to compile for two reasons:

1) The header watchdog.h cannot be found.
2) The header zlib.h is picked up from the tool chain rather than the
   project causing a prototype conflict for crc32.

This patch addresses both of these issues.

Platforms Tested On:
- AMCC "Kilauea"

Signed-off-by: Grant Erickson <gerickson@nuovations.com>
2008-05-09 23:04:41 +02:00
..
fw_env.c Fix compile problem with new env code. 2008-01-08 22:58:27 +01:00
fw_env.config * Restrict baudrate settings on LWMON to higher speeds 2003-01-11 09:48:40 +00:00
fw_env.h tools: fix fw_printenv tool to compile again 2008-01-08 22:53:01 +01:00
fw_env_main.c * Patch by Josef Wagner, 12 Mar 2003: 2003-03-12 10:41:04 +00:00
Makefile Fix Compilation Errors with 'tools/env/fw_printenv' 2008-05-09 23:04:41 +02:00
README tools: fix fw_printenv tool to compile again 2008-01-08 22:53:01 +01:00

This is a demo implementation of a Linux command line tool to access
the U-Boot's environment variables.

For the run-time utiltity configuration uncomment the line
#define CONFIG_FILE  "/etc/fw_env.config"
in fw_env.h.

For building against older versions of the MTD headers (meaning before
v2.6.8-rc1) it is required to pass the argument "MTD_VERSION=old" to
make.

See comments in the fw_env.config file for definitions for the
particular board.

Configuration can also be done via #defines in the fw_env.h file. The
following lines are relevant:

#define HAVE_REDUND	/* For systems with 2 env sectors */
#define DEVICE1_NAME	"/dev/mtd1"
#define DEVICE2_NAME	"/dev/mtd2"
#define DEVICE1_OFFSET    0x0000
#define ENV1_SIZE         0x4000
#define DEVICE1_ESIZE     0x4000
#define DEVICE2_OFFSET    0x0000
#define ENV2_SIZE         0x4000
#define DEVICE2_ESIZE     0x4000

Current configuration matches the environment layout of the TRAB
board.

Un-define HAVE_REDUND, if you want to use the utlities on a system
that does not have support for redundant environment enabled.
If HAVE_REDUND is undefined, DEVICE2_NAME is ignored,
as is ENV2_SIZE and DEVICE2_ESIZE.

The DEVICEx_NAME constants define which MTD character devices are to
be used to access the environment.

The DEVICEx_OFFSET constants define the environment offset within the
MTD character device.

ENVx_SIZE defines the size in bytes taken by the environment, which
may be less then flash sector size, if the environment takes less
then 1 sector.

DEVICEx_ESIZE defines the size of the first sector in the flash
partition where the environment resides.