u-boot/arch/arm/dts/stm32mp157-u-boot.dtsi
Patrick Delaunay 3d2d115a30 dts: add device tree for STM32MP157C-ED1 board
Add minimal devicetree for STM32MP157C-ED1 board,
with only the devices to allow boot from SDCARD:
- RCC for clock and reset
- UART4 for console
- I2C and PMIC
- DDR
- SDMMC0 for SDCard

Waiting Kernel upstream for alignment.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19 16:14:22 -04:00

134 lines
1.6 KiB
Text

/*
* Copyright : STMicroelectronics 2018
*
* SPDX-License-Identifier: GPL-2.0+ BSD-3-Clause
*/
/ {
aliases {
gpio0 = &gpioa;
gpio1 = &gpiob;
gpio2 = &gpioc;
gpio3 = &gpiod;
gpio4 = &gpioe;
gpio5 = &gpiof;
gpio6 = &gpiog;
gpio7 = &gpioh;
gpio8 = &gpioi;
gpio9 = &gpioj;
gpio10 = &gpiok;
gpio25 = &gpioz;
};
config {
u-boot,dm-pre-reloc;
};
clocks {
u-boot,dm-pre-reloc;
};
soc {
u-boot,dm-pre-reloc;
};
};
&clk_hsi {
u-boot,dm-pre-reloc;
};
&clk_hse {
u-boot,dm-pre-reloc;
};
&clk_lse {
u-boot,dm-pre-reloc;
};
&clk_lsi {
u-boot,dm-pre-reloc;
};
&clk_csi {
u-boot,dm-pre-reloc;
};
&rcc {
u-boot,dm-pre-reloc;
};
&rcc_clk {
u-boot,dm-pre-reloc;
};
&rcc_rst {
u-boot,dm-pre-reloc;
};
&pinctrl {
u-boot,dm-pre-reloc;
};
&pinctrl_z {
u-boot,dm-pre-reloc;
};
&gpioa {
compatible = "st,stm32-gpio";
u-boot,dm-pre-reloc;
};
&gpiob {
compatible = "st,stm32-gpio";
u-boot,dm-pre-reloc;
};
&gpioc {
compatible = "st,stm32-gpio";
u-boot,dm-pre-reloc;
};
&gpiod {
compatible = "st,stm32-gpio";
u-boot,dm-pre-reloc;
};
&gpioe {
compatible = "st,stm32-gpio";
u-boot,dm-pre-reloc;
};
&gpiof {
compatible = "st,stm32-gpio";
u-boot,dm-pre-reloc;
};
&gpiog {
compatible = "st,stm32-gpio";
u-boot,dm-pre-reloc;
};
&gpioh {
compatible = "st,stm32-gpio";
u-boot,dm-pre-reloc;
};
&gpioi {
compatible = "st,stm32-gpio";
u-boot,dm-pre-reloc;
};
&gpioj {
compatible = "st,stm32-gpio";
u-boot,dm-pre-reloc;
};
&gpiok {
compatible = "st,stm32-gpio";
u-boot,dm-pre-reloc;
};
&gpioz {
compatible = "st,stm32-gpio";
u-boot,dm-pre-reloc;
};