u-boot/common/cmd_jffs2.c
Scott Wood be33b046b5 Remove legacy NAND and disk on chip code.
Legacy NAND had been scheduled for removal.  Any boards that use this
were already not building in the previous release due to an #error.

The disk on chip code in common/cmd_doc.c relies on legacy NAND,
and it has also been removed.  There is newer disk on chip code
in drivers/mtd/nand; someone with access to hardware and sufficient
time and motivation can try to get that working, but for now disk
on chip is not supported.

Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-07-16 19:07:47 -05:00

637 lines
16 KiB
C

/*
* (C) Copyright 2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* (C) Copyright 2002
* Robert Schwebel, Pengutronix, <r.schwebel@pengutronix.de>
*
* (C) Copyright 2003
* Kai-Uwe Bloem, Auerswald GmbH & Co KG, <linux-development@auerswald.de>
*
* (C) Copyright 2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* Added support for reading flash partition table from environment.
* Parsing routines are based on driver/mtd/cmdline.c from the linux 2.4
* kernel tree.
*
* $Id: cmdlinepart.c,v 1.17 2004/11/26 11:18:47 lavinen Exp $
* Copyright 2002 SYSGO Real-Time Solutions GmbH
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
* Three environment variables are used by the parsing routines:
*
* 'partition' - keeps current partition identifier
*
* partition := <part-id>
* <part-id> := <dev-id>,part_num
*
*
* 'mtdids' - linux kernel mtd device id <-> u-boot device id mapping
*
* mtdids=<idmap>[,<idmap>,...]
*
* <idmap> := <dev-id>=<mtd-id>
* <dev-id> := 'nand'|'nor'|'onenand'<dev-num>
* <dev-num> := mtd device number, 0...
* <mtd-id> := unique device tag used by linux kernel to find mtd device (mtd->name)
*
*
* 'mtdparts' - partition list
*
* mtdparts=mtdparts=<mtd-def>[;<mtd-def>...]
*
* <mtd-def> := <mtd-id>:<part-def>[,<part-def>...]
* <mtd-id> := unique device tag used by linux kernel to find mtd device (mtd->name)
* <part-def> := <size>[@<offset>][<name>][<ro-flag>]
* <size> := standard linux memsize OR '-' to denote all remaining space
* <offset> := partition start offset within the device
* <name> := '(' NAME ')'
* <ro-flag> := when set to 'ro' makes partition read-only (not used, passed to kernel)
*
* Notes:
* - each <mtd-id> used in mtdparts must albo exist in 'mtddis' mapping
* - if the above variables are not set defaults for a given target are used
*
* Examples:
*
* 1 NOR Flash, with 1 single writable partition:
* mtdids=nor0=edb7312-nor
* mtdparts=mtdparts=edb7312-nor:-
*
* 1 NOR Flash with 2 partitions, 1 NAND with one
* mtdids=nor0=edb7312-nor,nand0=edb7312-nand
* mtdparts=mtdparts=edb7312-nor:256k(ARMboot)ro,-(root);edb7312-nand:-(home)
*
*/
/*
* JFFS2/CRAMFS support
*/
#include <common.h>
#include <command.h>
#include <malloc.h>
#include <jffs2/jffs2.h>
#include <linux/list.h>
#include <linux/ctype.h>
#include <cramfs/cramfs_fs.h>
#if defined(CONFIG_CMD_NAND)
#include <linux/mtd/nand.h>
#include <nand.h>
#endif
#if defined(CONFIG_CMD_ONENAND)
#include <linux/mtd/mtd.h>
#include <linux/mtd/onenand.h>
#include <onenand_uboot.h>
#endif
/* enable/disable debugging messages */
#define DEBUG_JFFS
#undef DEBUG_JFFS
#ifdef DEBUG_JFFS
# define DEBUGF(fmt, args...) printf(fmt ,##args)
#else
# define DEBUGF(fmt, args...)
#endif
/* special size referring to all the remaining space in a partition */
#define SIZE_REMAINING 0xFFFFFFFF
/* special offset value, it is used when not provided by user
*
* this value is used temporarily during parsing, later such offests
* are recalculated */
#define OFFSET_NOT_SPECIFIED 0xFFFFFFFF
/* minimum partition size */
#define MIN_PART_SIZE 4096
/* this flag needs to be set in part_info struct mask_flags
* field for read-only partitions */
#define MTD_WRITEABLE_CMD 1
/* current active device and partition number */
#ifdef CONFIG_CMD_MTDPARTS
/* Use the ones declared in cmd_mtdparts.c */
extern struct mtd_device *current_mtd_dev;
extern u8 current_mtd_partnum;
#else
/* Use local ones */
struct mtd_device *current_mtd_dev = NULL;
u8 current_mtd_partnum = 0;
#endif
#if defined(CONFIG_CMD_CRAMFS)
extern int cramfs_check (struct part_info *info);
extern int cramfs_load (char *loadoffset, struct part_info *info, char *filename);
extern int cramfs_ls (struct part_info *info, char *filename);
extern int cramfs_info (struct part_info *info);
#else
/* defining empty macros for function names is ugly but avoids ifdef clutter
* all over the code */
#define cramfs_check(x) (0)
#define cramfs_load(x,y,z) (-1)
#define cramfs_ls(x,y) (0)
#define cramfs_info(x) (0)
#endif
#ifndef CONFIG_CMD_MTDPARTS
/**
* Check device number to be within valid range for given device type.
*
* @param dev device to validate
* @return 0 if device is valid, 1 otherwise
*/
static int mtd_device_validate(u8 type, u8 num, u32 *size)
{
if (type == MTD_DEV_TYPE_NOR) {
#if defined(CONFIG_CMD_FLASH)
if (num < CONFIG_SYS_MAX_FLASH_BANKS) {
extern flash_info_t flash_info[];
*size = flash_info[num].size;
return 0;
}
printf("no such FLASH device: %s%d (valid range 0 ... %d\n",
MTD_DEV_TYPE(type), num, CONFIG_SYS_MAX_FLASH_BANKS - 1);
#else
printf("support for FLASH devices not present\n");
#endif
} else if (type == MTD_DEV_TYPE_NAND) {
#if defined(CONFIG_JFFS2_NAND) && defined(CONFIG_CMD_NAND)
if (num < CONFIG_SYS_MAX_NAND_DEVICE) {
*size = nand_info[num].size;
return 0;
}
printf("no such NAND device: %s%d (valid range 0 ... %d)\n",
MTD_DEV_TYPE(type), num, CONFIG_SYS_MAX_NAND_DEVICE - 1);
#else
printf("support for NAND devices not present\n");
#endif
} else if (type == MTD_DEV_TYPE_ONENAND) {
#if defined(CONFIG_CMD_ONENAND)
*size = onenand_mtd.size;
return 0;
#else
printf("support for OneNAND devices not present\n");
#endif
} else
printf("Unknown defice type %d\n", type);
return 1;
}
/**
* Parse device id string <dev-id> := 'nand'|'nor'|'onenand'<dev-num>,
* return device type and number.
*
* @param id string describing device id
* @param ret_id output pointer to next char after parse completes (output)
* @param dev_type parsed device type (output)
* @param dev_num parsed device number (output)
* @return 0 on success, 1 otherwise
*/
static int mtd_id_parse(const char *id, const char **ret_id, u8 *dev_type, u8 *dev_num)
{
const char *p = id;
*dev_type = 0;
if (strncmp(p, "nand", 4) == 0) {
*dev_type = MTD_DEV_TYPE_NAND;
p += 4;
} else if (strncmp(p, "nor", 3) == 0) {
*dev_type = MTD_DEV_TYPE_NOR;
p += 3;
} else if (strncmp(p, "onenand", 7) == 0) {
*dev_type = MTD_DEV_TYPE_ONENAND;
p += 7;
} else {
printf("incorrect device type in %s\n", id);
return 1;
}
if (!isdigit(*p)) {
printf("incorrect device number in %s\n", id);
return 1;
}
*dev_num = simple_strtoul(p, (char **)&p, 0);
if (ret_id)
*ret_id = p;
return 0;
}
/*
* 'Static' version of command line mtdparts_init() routine. Single partition on
* a single device configuration.
*/
/**
* Calculate sector size.
*
* @return sector size
*/
static inline u32 get_part_sector_size_nand(struct mtdids *id)
{
#if defined(CONFIG_JFFS2_NAND) && defined(CONFIG_CMD_NAND)
nand_info_t *nand;
nand = &nand_info[id->num];
return nand->erasesize;
#else
BUG();
return 0;
#endif
}
static inline u32 get_part_sector_size_nor(struct mtdids *id, struct part_info *part)
{
#if defined(CONFIG_CMD_FLASH)
extern flash_info_t flash_info[];
u32 end_phys, start_phys, sector_size = 0, size = 0;
int i;
flash_info_t *flash;
flash = &flash_info[id->num];
start_phys = flash->start[0] + part->offset;
end_phys = start_phys + part->size;
for (i = 0; i < flash->sector_count; i++) {
if (flash->start[i] >= end_phys)
break;
if (flash->start[i] >= start_phys) {
if (i == flash->sector_count - 1) {
size = flash->start[0] + flash->size - flash->start[i];
} else {
size = flash->start[i+1] - flash->start[i];
}
if (sector_size < size)
sector_size = size;
}
}
return sector_size;
#else
BUG();
return 0;
#endif
}
static inline u32 get_part_sector_size_onenand(void)
{
#if defined(CONFIG_CMD_ONENAND)
struct mtd_info *mtd;
mtd = &onenand_mtd;
return mtd->erasesize;
#else
BUG();
return 0;
#endif
}
static inline u32 get_part_sector_size(struct mtdids *id, struct part_info *part)
{
if (id->type == MTD_DEV_TYPE_NAND)
return get_part_sector_size_nand(id);
else if (id->type == MTD_DEV_TYPE_NOR)
return get_part_sector_size_nor(id, part);
else if (id->type == MTD_DEV_TYPE_ONENAND)
return get_part_sector_size_onenand();
else
DEBUGF("Error: Unknown device type.\n");
return 0;
}
/**
* Parse and initialize global mtdids mapping and create global
* device/partition list.
*
* 'Static' version of command line mtdparts_init() routine. Single partition on
* a single device configuration.
*
* @return 0 on success, 1 otherwise
*/
int mtdparts_init(void)
{
static int initialized = 0;
u32 size;
char *dev_name;
DEBUGF("\n---mtdparts_init---\n");
if (!initialized) {
struct mtdids *id;
struct part_info *part;
initialized = 1;
current_mtd_dev = (struct mtd_device *)
malloc(sizeof(struct mtd_device) +
sizeof(struct part_info) +
sizeof(struct mtdids));
if (!current_mtd_dev) {
printf("out of memory\n");
return 1;
}
memset(current_mtd_dev, 0, sizeof(struct mtd_device) +
sizeof(struct part_info) + sizeof(struct mtdids));
id = (struct mtdids *)(current_mtd_dev + 1);
part = (struct part_info *)(id + 1);
/* id */
id->mtd_id = "single part";
#if defined(CONFIG_JFFS2_DEV)
dev_name = CONFIG_JFFS2_DEV;
#else
dev_name = "nor0";
#endif
if ((mtd_id_parse(dev_name, NULL, &id->type, &id->num) != 0) ||
(mtd_device_validate(id->type, id->num, &size) != 0)) {
printf("incorrect device: %s%d\n", MTD_DEV_TYPE(id->type), id->num);
free(current_mtd_dev);
return 1;
}
id->size = size;
INIT_LIST_HEAD(&id->link);
DEBUGF("dev id: type = %d, num = %d, size = 0x%08lx, mtd_id = %s\n",
id->type, id->num, id->size, id->mtd_id);
/* partition */
part->name = "static";
part->auto_name = 0;
#if defined(CONFIG_JFFS2_PART_SIZE)
part->size = CONFIG_JFFS2_PART_SIZE;
#else
part->size = SIZE_REMAINING;
#endif
#if defined(CONFIG_JFFS2_PART_OFFSET)
part->offset = CONFIG_JFFS2_PART_OFFSET;
#else
part->offset = 0x00000000;
#endif
part->sector_size = get_part_sector_size(id, part);
part->dev = current_mtd_dev;
INIT_LIST_HEAD(&part->link);
/* recalculate size if needed */
if (part->size == SIZE_REMAINING)
part->size = id->size - part->offset;
DEBUGF("part : name = %s, size = 0x%08lx, offset = 0x%08lx\n",
part->name, part->size, part->offset);
/* device */
current_mtd_dev->id = id;
INIT_LIST_HEAD(&current_mtd_dev->link);
current_mtd_dev->num_parts = 1;
INIT_LIST_HEAD(&current_mtd_dev->parts);
list_add(&part->link, &current_mtd_dev->parts);
}
return 0;
}
#endif /* #ifndef CONFIG_CMD_MTDPARTS */
/**
* Return pointer to the partition of a requested number from a requested
* device.
*
* @param dev device that is to be searched for a partition
* @param part_num requested partition number
* @return pointer to the part_info, NULL otherwise
*/
static struct part_info* jffs2_part_info(struct mtd_device *dev, unsigned int part_num)
{
struct list_head *entry;
struct part_info *part;
int num;
if (!dev)
return NULL;
DEBUGF("\n--- jffs2_part_info: partition number %d for device %s%d (%s)\n",
part_num, MTD_DEV_TYPE(dev->id->type),
dev->id->num, dev->id->mtd_id);
if (part_num >= dev->num_parts) {
printf("invalid partition number %d for device %s%d (%s)\n",
part_num, MTD_DEV_TYPE(dev->id->type),
dev->id->num, dev->id->mtd_id);
return NULL;
}
/* locate partition number, return it */
num = 0;
list_for_each(entry, &dev->parts) {
part = list_entry(entry, struct part_info, link);
if (part_num == num++) {
return part;
}
}
return NULL;
}
/***************************************************/
/* U-boot commands */
/***************************************************/
/**
* Routine implementing fsload u-boot command. This routine tries to load
* a requested file from jffs2/cramfs filesystem on a current partition.
*
* @param cmdtp command internal data
* @param flag command flag
* @param argc number of arguments supplied to the command
* @param argv arguments list
* @return 0 on success, 1 otherwise
*/
int do_jffs2_fsload(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
char *fsname;
char *filename;
int size;
struct part_info *part;
ulong offset = load_addr;
/* pre-set Boot file name */
if ((filename = getenv("bootfile")) == NULL) {
filename = "uImage";
}
if (argc == 2) {
filename = argv[1];
}
if (argc == 3) {
offset = simple_strtoul(argv[1], NULL, 16);
load_addr = offset;
filename = argv[2];
}
/* make sure we are in sync with env variables */
if (mtdparts_init() !=0)
return 1;
if ((part = jffs2_part_info(current_mtd_dev, current_mtd_partnum))){
/* check partition type for cramfs */
fsname = (cramfs_check(part) ? "CRAMFS" : "JFFS2");
printf("### %s loading '%s' to 0x%lx\n", fsname, filename, offset);
if (cramfs_check(part)) {
size = cramfs_load ((char *) offset, part, filename);
} else {
/* if this is not cramfs assume jffs2 */
size = jffs2_1pass_load((char *)offset, part, filename);
}
if (size > 0) {
char buf[10];
printf("### %s load complete: %d bytes loaded to 0x%lx\n",
fsname, size, offset);
sprintf(buf, "%x", size);
setenv("filesize", buf);
} else {
printf("### %s LOAD ERROR<%x> for %s!\n", fsname, size, filename);
}
return !(size > 0);
}
return 1;
}
/**
* Routine implementing u-boot ls command which lists content of a given
* directory on a current partition.
*
* @param cmdtp command internal data
* @param flag command flag
* @param argc number of arguments supplied to the command
* @param argv arguments list
* @return 0 on success, 1 otherwise
*/
int do_jffs2_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
char *filename = "/";
int ret;
struct part_info *part;
if (argc == 2)
filename = argv[1];
/* make sure we are in sync with env variables */
if (mtdparts_init() !=0)
return 1;
if ((part = jffs2_part_info(current_mtd_dev, current_mtd_partnum))){
/* check partition type for cramfs */
if (cramfs_check(part)) {
ret = cramfs_ls (part, filename);
} else {
/* if this is not cramfs assume jffs2 */
ret = jffs2_1pass_ls(part, filename);
}
return ret ? 0 : 1;
}
return 1;
}
/**
* Routine implementing u-boot fsinfo command. This routine prints out
* miscellaneous filesystem informations/statistics.
*
* @param cmdtp command internal data
* @param flag command flag
* @param argc number of arguments supplied to the command
* @param argv arguments list
* @return 0 on success, 1 otherwise
*/
int do_jffs2_fsinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
struct part_info *part;
char *fsname;
int ret;
/* make sure we are in sync with env variables */
if (mtdparts_init() !=0)
return 1;
if ((part = jffs2_part_info(current_mtd_dev, current_mtd_partnum))){
/* check partition type for cramfs */
fsname = (cramfs_check(part) ? "CRAMFS" : "JFFS2");
printf("### filesystem type is %s\n", fsname);
if (cramfs_check(part)) {
ret = cramfs_info (part);
} else {
/* if this is not cramfs assume jffs2 */
ret = jffs2_1pass_info(part);
}
return ret ? 0 : 1;
}
return 1;
}
/***************************************************/
U_BOOT_CMD(
fsload, 3, 0, do_jffs2_fsload,
"load binary file from a filesystem image",
"[ off ] [ filename ]\n"
" - load binary file from flash bank\n"
" with offset 'off'"
);
U_BOOT_CMD(
ls, 2, 1, do_jffs2_ls,
"list files in a directory (default /)",
"[ directory ]"
);
U_BOOT_CMD(
fsinfo, 1, 1, do_jffs2_fsinfo,
"print information about filesystems",
""
);
/***************************************************/