mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
3765b3e7bd
Signed-off-by: Wolfgang Denk <wd@denx.de>
161 lines
4.1 KiB
C
161 lines
4.1 KiB
C
/*
|
|
* (C) Copyright 2008
|
|
* Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
|
|
*
|
|
* Based on board/amcc/yosemite/yosemite.c
|
|
* (C) Copyright 2006-2007
|
|
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/ppc4xx.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/io.h>
|
|
#include <asm/4xx_pci.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/* info for FLASH chips */
|
|
extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
register uint reg;
|
|
|
|
/*
|
|
* Setup the external bus controller/chip selects
|
|
*/
|
|
mfebc(EBC0_CFG, reg);
|
|
mtebc(EBC0_CFG, reg | 0x04000000); /* Set ATC */
|
|
|
|
/*
|
|
* Setup the GPIO pins
|
|
*/
|
|
|
|
/* setup Address lines for flash size 64Meg. */
|
|
out32(GPIO0_OSRL, in32(GPIO0_OSRL) | 0x54000000);
|
|
out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x54000000);
|
|
out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x54000000);
|
|
|
|
/* setup emac */
|
|
out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xC080);
|
|
out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x40);
|
|
out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x55);
|
|
out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0x50004000);
|
|
out32(GPIO0_ISR1H, in32(GPIO0_ISR1H) | 0x00440000);
|
|
|
|
/* UART0 and UART1*/
|
|
out32(GPIO1_TCR, in32(GPIO1_TCR) | 0x16000000);
|
|
out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x02180000);
|
|
out32(GPIO1_ISR1L, in32(GPIO1_ISR1L) | 0x00400000);
|
|
out32(GPIO1_ISR2L, in32(GPIO1_ISR2L) | 0x04010000);
|
|
|
|
/* disable boot-eeprom WP */
|
|
out32(GPIO0_OSRL, in32(GPIO0_OSRL) & ~0x00C00000);
|
|
out32(GPIO0_TSRL, in32(GPIO0_TSRL) & ~0x00C00000);
|
|
out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) & ~0x00C00000);
|
|
out32(GPIO0_TCR, in32(GPIO0_TCR) | 0x08000000);
|
|
out32(GPIO0_OR, in32(GPIO0_OR) & ~0x08000000);
|
|
|
|
/* external interrupts IRQ0...3 */
|
|
out32(GPIO1_TCR, in32(GPIO1_TCR) & ~0x00f00000);
|
|
out32(GPIO1_TSRL, in32(GPIO1_TSRL) & ~0x00005500);
|
|
out32(GPIO1_ISR1L, in32(GPIO1_ISR1L) | 0x00005500);
|
|
|
|
|
|
/*
|
|
* Setup the interrupt controller polarities, triggers, etc.
|
|
*/
|
|
mtdcr(UIC0SR, 0xffffffff); /* clear all */
|
|
mtdcr(UIC0ER, 0x00000000); /* disable all */
|
|
mtdcr(UIC0CR, 0x00000009); /* ATI & UIC1 crit are critical */
|
|
mtdcr(UIC0PR, 0xfffffe13); /* per ref-board manual */
|
|
mtdcr(UIC0TR, 0x01c00008); /* per ref-board manual */
|
|
mtdcr(UIC0VR, 0x00000001); /* int31 highest, base=0x000 */
|
|
mtdcr(UIC0SR, 0xffffffff); /* clear all */
|
|
|
|
mtdcr(UIC1SR, 0xffffffff); /* clear all */
|
|
mtdcr(UIC1ER, 0x00000000); /* disable all */
|
|
mtdcr(UIC1CR, 0x00000000); /* all non-critical */
|
|
mtdcr(UIC1PR, 0xffffe0ff); /* per ref-board manual */
|
|
mtdcr(UIC1TR, 0x00ffc000); /* per ref-board manual */
|
|
mtdcr(UIC1VR, 0x00000001); /* int31 highest, base=0x000 */
|
|
mtdcr(UIC1SR, 0xffffffff); /* clear all */
|
|
|
|
/*
|
|
* Setup other serial configuration
|
|
*/
|
|
mfsdr(SDR0_PCI0, reg);
|
|
mtsdr(SDR0_PCI0, 0x80000000 | reg); /* PCI arbiter enabled */
|
|
mtsdr(SDR0_PFC0, 0x00003e00); /* Pin function */
|
|
mtsdr(SDR0_PFC1, 0x00048000); /* Pin function: UART0 has 4 pins */
|
|
|
|
return 0;
|
|
}
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
uint pbcr;
|
|
int size_val;
|
|
uint sz;
|
|
|
|
/* Re-do sizing to get full correct info */
|
|
mfebc(PB0CR, pbcr);
|
|
|
|
if (gd->bd->bi_flashsize > 0x08000000)
|
|
panic("Max. flash banksize is 128 MB!\n");
|
|
|
|
for (sz = gd->bd->bi_flashsize, size_val = 7;
|
|
((sz & 0x08000000) == 0) && (size_val > 0); --size_val)
|
|
sz <<= 1;
|
|
|
|
pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
|
|
mtebc(PB0CR, pbcr);
|
|
|
|
/* adjust flash start and offset */
|
|
gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
|
|
gd->bd->bi_flashoffset = 0;
|
|
|
|
/* Monitor protection ON by default */
|
|
(void)flash_protect(FLAG_PROTECT_SET,
|
|
-CONFIG_SYS_MONITOR_LEN,
|
|
0xffffffff,
|
|
&flash_info[0]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
char buf[64];
|
|
int i = getenv_f("serial#", buf, sizeof(buf));
|
|
|
|
printf("Board: GDPPC440ETX - G&D PPC440EP/GR ETX-module");
|
|
|
|
if (i > 0) {
|
|
puts(", serial# ");
|
|
puts(buf);
|
|
}
|
|
putc('\n');
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Override weak pci_pre_init()
|
|
*/
|
|
#if defined(CONFIG_PCI)
|
|
int pci_pre_init(struct pci_controller *hose)
|
|
{
|
|
/* First call common code */
|
|
__pci_pre_init(hose);
|
|
|
|
/* enable 66 MHz ext. Clock */
|
|
out32(GPIO1_TCR, in32(GPIO1_TCR) | 0x00008000);
|
|
out32(GPIO1_OR, in32(GPIO1_OR) | 0x00008000);
|
|
|
|
return 1;
|
|
}
|
|
#endif /* defined(CONFIG_PCI) */
|