mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-26 22:52:18 +00:00
37304aaf60
This converts the following to Kconfig: CONFIG_USE_PREBOOT CONFIG_PREBOOT Both are together in one commit, since otherwise the former causes kconfig to define the latter, which gives duplicate symbol errors. Includes a manual fixup for CONFIG_PREBOOT in ids8313_defconfig since the backslash lands in the wrong place. Similarly with socfpga_vining_fpga. Signed-off-by: Simon Glass <sjg@chromium.org>
327 lines
9.2 KiB
C
327 lines
9.2 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* (C) Copyright 2012 Michal Simek <monstr@monstr.eu>
|
|
* (C) Copyright 2013 - 2018 Xilinx, Inc.
|
|
*
|
|
* Common configuration options for all Zynq boards.
|
|
*/
|
|
|
|
#ifndef __CONFIG_ZYNQ_COMMON_H
|
|
#define __CONFIG_ZYNQ_COMMON_H
|
|
|
|
/* CPU clock */
|
|
#ifndef CONFIG_CPU_FREQ_HZ
|
|
# define CONFIG_CPU_FREQ_HZ 800000000
|
|
#endif
|
|
|
|
#define CONFIG_REMAKE_ELF
|
|
|
|
/* Cache options */
|
|
#define CONFIG_SYS_L2CACHE_OFF
|
|
#ifndef CONFIG_SYS_L2CACHE_OFF
|
|
# define CONFIG_SYS_L2_PL310
|
|
# define CONFIG_SYS_PL310_BASE 0xf8f02000
|
|
#endif
|
|
|
|
#define ZYNQ_SCUTIMER_BASEADDR 0xF8F00600
|
|
#define CONFIG_SYS_TIMERBASE ZYNQ_SCUTIMER_BASEADDR
|
|
#define CONFIG_SYS_TIMER_COUNTS_DOWN
|
|
#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMERBASE + 0x4)
|
|
|
|
/* Serial drivers */
|
|
/* The following table includes the supported baudrates */
|
|
#define CONFIG_SYS_BAUDRATE_TABLE \
|
|
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
|
|
|
|
#define CONFIG_ARM_DCC
|
|
|
|
/* Ethernet driver */
|
|
#if defined(CONFIG_ZYNQ_GEM)
|
|
# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
|
|
# define CONFIG_BOOTP_MAY_FAIL
|
|
#endif
|
|
|
|
/* QSPI */
|
|
|
|
/* NOR */
|
|
#ifdef CONFIG_MTD_NOR_FLASH
|
|
# define CONFIG_SYS_FLASH_BASE 0xE2000000
|
|
# define CONFIG_SYS_FLASH_SIZE (16 * 1024 * 1024)
|
|
# define CONFIG_SYS_MAX_FLASH_BANKS 1
|
|
# define CONFIG_SYS_MAX_FLASH_SECT 512
|
|
# define CONFIG_SYS_FLASH_ERASE_TOUT 1000
|
|
# define CONFIG_SYS_FLASH_WRITE_TOUT 5000
|
|
# define CONFIG_FLASH_SHOW_PROGRESS 10
|
|
# undef CONFIG_SYS_FLASH_EMPTY_INFO
|
|
#endif
|
|
|
|
#ifdef CONFIG_NAND_ZYNQ
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_ONFI_DETECTION
|
|
#endif
|
|
|
|
#ifdef CONFIG_USB_EHCI_ZYNQ
|
|
# define CONFIG_EHCI_IS_TDI
|
|
|
|
# define CONFIG_SYS_DFU_DATA_BUF_SIZE 0x600000
|
|
# define DFU_DEFAULT_POLL_TIMEOUT 300
|
|
# define CONFIG_THOR_RESET_OFF
|
|
# define DFU_ALT_INFO_RAM \
|
|
"dfu_ram_info=" \
|
|
"setenv dfu_alt_info " \
|
|
"${kernel_image} ram 0x3000000 0x500000\\\\;" \
|
|
"${devicetree_image} ram 0x2A00000 0x20000\\\\;" \
|
|
"${ramdisk_image} ram 0x2000000 0x600000\0" \
|
|
"dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
|
|
"thor_ram=run dfu_ram_info && thordown 0 ram 0\0"
|
|
|
|
# if defined(CONFIG_MMC_SDHCI_ZYNQ)
|
|
# define DFU_ALT_INFO_MMC \
|
|
"dfu_mmc_info=" \
|
|
"setenv dfu_alt_info " \
|
|
"${kernel_image} fat 0 1\\\\;" \
|
|
"${devicetree_image} fat 0 1\\\\;" \
|
|
"${ramdisk_image} fat 0 1\0" \
|
|
"dfu_mmc=run dfu_mmc_info && dfu 0 mmc 0\0" \
|
|
"thor_mmc=run dfu_mmc_info && thordown 0 mmc 0\0"
|
|
|
|
# define DFU_ALT_INFO \
|
|
DFU_ALT_INFO_RAM \
|
|
DFU_ALT_INFO_MMC
|
|
# else
|
|
# define DFU_ALT_INFO \
|
|
DFU_ALT_INFO_RAM
|
|
# endif
|
|
#endif
|
|
|
|
#if !defined(DFU_ALT_INFO)
|
|
# define DFU_ALT_INFO
|
|
#endif
|
|
|
|
/* Allow to overwrite serial and ethaddr */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
/* enable preboot to be loaded before CONFIG_BOOTDELAY */
|
|
|
|
/* Boot configuration */
|
|
#define CONFIG_SYS_LOAD_ADDR 0 /* default? */
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#define BOOTENV
|
|
#else
|
|
|
|
#ifdef CONFIG_CMD_MMC
|
|
#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
|
|
#else
|
|
#define BOOT_TARGET_DEVICES_MMC(func)
|
|
#endif
|
|
|
|
#ifdef CONFIG_CMD_USB
|
|
#define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
|
|
#else
|
|
#define BOOT_TARGET_DEVICES_USB(func)
|
|
#endif
|
|
|
|
#if defined(CONFIG_CMD_PXE) && defined(CONFIG_CMD_DHCP)
|
|
#define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na)
|
|
#else
|
|
#define BOOT_TARGET_DEVICES_PXE(func)
|
|
#endif
|
|
|
|
#if defined(CONFIG_CMD_DHCP)
|
|
#define BOOT_TARGET_DEVICES_DHCP(func) func(DHCP, dhcp, na)
|
|
#else
|
|
#define BOOT_TARGET_DEVICES_DHCP(func)
|
|
#endif
|
|
|
|
#if defined(CONFIG_ZYNQ_QSPI)
|
|
# define BOOT_TARGET_DEVICES_QSPI(func) func(QSPI, qspi, na)
|
|
#else
|
|
# define BOOT_TARGET_DEVICES_QSPI(func)
|
|
#endif
|
|
|
|
#if defined(CONFIG_NAND_ZYNQ)
|
|
# define BOOT_TARGET_DEVICES_NAND(func) func(NAND, nand, na)
|
|
#else
|
|
# define BOOT_TARGET_DEVICES_NAND(func)
|
|
#endif
|
|
|
|
#if defined(CONFIG_MTD_NOR_FLASH)
|
|
# define BOOT_TARGET_DEVICES_NOR(func) func(NOR, nor, na)
|
|
#else
|
|
# define BOOT_TARGET_DEVICES_NOR(func)
|
|
#endif
|
|
|
|
#define BOOTENV_DEV_XILINX(devtypeu, devtypel, instance) \
|
|
"bootcmd_xilinx=run $modeboot\0"
|
|
|
|
#define BOOTENV_DEV_NAME_XILINX(devtypeu, devtypel, instance) \
|
|
"xilinx "
|
|
|
|
#define BOOTENV_DEV_QSPI(devtypeu, devtypel, instance) \
|
|
"bootcmd_qspi=sf probe 0 0 0 && " \
|
|
"sf read $scriptaddr $script_offset_f $script_size_f && " \
|
|
"source ${scriptaddr}; echo SCRIPT FAILED: continuing...;\0"
|
|
|
|
#define BOOTENV_DEV_NAME_QSPI(devtypeu, devtypel, instance) \
|
|
"qspi "
|
|
|
|
#define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \
|
|
"bootcmd_nand=nand info && " \
|
|
"nand read $scriptaddr $script_offset_f $script_size_f && " \
|
|
"source ${scriptaddr}; echo SCRIPT FAILED: continuing...;\0"
|
|
|
|
#define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \
|
|
"nand "
|
|
|
|
#define BOOTENV_DEV_NOR(devtypeu, devtypel, instance) \
|
|
"bootcmd_nor=cp.b $scropt_offset_nor $scriptaddr $script_size_f && " \
|
|
"source ${scriptaddr}; echo SCRIPT FAILED: continuing...;\0"
|
|
|
|
#define BOOTENV_DEV_NAME_NOR(devtypeu, devtypel, instance) \
|
|
"nor "
|
|
|
|
#define BOOT_TARGET_DEVICES(func) \
|
|
BOOT_TARGET_DEVICES_MMC(func) \
|
|
BOOT_TARGET_DEVICES_QSPI(func) \
|
|
BOOT_TARGET_DEVICES_NAND(func) \
|
|
BOOT_TARGET_DEVICES_NOR(func) \
|
|
BOOT_TARGET_DEVICES_USB(func) \
|
|
BOOT_TARGET_DEVICES_PXE(func) \
|
|
BOOT_TARGET_DEVICES_DHCP(func) \
|
|
func(XILINX, xilinx, na)
|
|
|
|
#include <config_distro_bootcmd.h>
|
|
#endif /* CONFIG_SPL_BUILD */
|
|
|
|
/* Default environment */
|
|
#ifndef CONFIG_EXTRA_ENV_SETTINGS
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"fit_image=fit.itb\0" \
|
|
"load_addr=0x2000000\0" \
|
|
"fit_size=0x800000\0" \
|
|
"flash_off=0x100000\0" \
|
|
"nor_flash_off=0xE2100000\0" \
|
|
"fdt_high=0x20000000\0" \
|
|
"initrd_high=0x20000000\0" \
|
|
"scriptaddr=0x20000\0" \
|
|
"script_offser_nor=0xE2FC0000\0" \
|
|
"script_offset_f=0xFC0000\0" \
|
|
"script_size_f=0x40000\0" \
|
|
"loadbootenv_addr=0x2000000\0" \
|
|
"fdt_addr_r=0x1f00000\0" \
|
|
"pxefile_addr_r=0x2000000\0" \
|
|
"kernel_addr_r=0x2000000\0" \
|
|
"scriptaddr=0x3000000\0" \
|
|
"ramdisk_addr_r=0x3100000\0" \
|
|
"bootenv=uEnv.txt\0" \
|
|
"bootenv_dev=mmc\0" \
|
|
"loadbootenv=load ${bootenv_dev} 0 ${loadbootenv_addr} ${bootenv}\0" \
|
|
"importbootenv=echo Importing environment from ${bootenv_dev} ...; " \
|
|
"env import -t ${loadbootenv_addr} $filesize\0" \
|
|
"bootenv_existence_test=test -e ${bootenv_dev} 0 /${bootenv}\0" \
|
|
"setbootenv=if env run bootenv_existence_test; then " \
|
|
"if env run loadbootenv; then " \
|
|
"env run importbootenv; " \
|
|
"fi; " \
|
|
"fi; \0" \
|
|
"sd_loadbootenv=setenv bootenv_dev mmc && " \
|
|
"run setbootenv \0" \
|
|
"usb_loadbootenv=setenv bootenv_dev usb && usb start && run setbootenv \0" \
|
|
"preboot=if test $modeboot = sdboot; then " \
|
|
"run sd_loadbootenv; " \
|
|
"echo Checking if uenvcmd is set ...; " \
|
|
"if test -n $uenvcmd; then " \
|
|
"echo Running uenvcmd ...; " \
|
|
"run uenvcmd; " \
|
|
"fi; " \
|
|
"fi; \0" \
|
|
"norboot=echo Copying FIT from NOR flash to RAM... && " \
|
|
"cp.b ${nor_flash_off} ${load_addr} ${fit_size} && " \
|
|
"bootm ${load_addr}\0" \
|
|
"sdboot=echo Copying FIT from SD to RAM... && " \
|
|
"load mmc 0 ${load_addr} ${fit_image} && " \
|
|
"bootm ${load_addr}\0" \
|
|
"jtagboot=echo TFTPing FIT to RAM... && " \
|
|
"tftpboot ${load_addr} ${fit_image} && " \
|
|
"bootm ${load_addr}\0" \
|
|
"usbboot=if usb start; then " \
|
|
"echo Copying FIT from USB to RAM... && " \
|
|
"load usb 0 ${load_addr} ${fit_image} && " \
|
|
"bootm ${load_addr}; fi\0" \
|
|
DFU_ALT_INFO \
|
|
BOOTENV
|
|
#endif
|
|
|
|
/* Miscellaneous configurable options */
|
|
|
|
#define CONFIG_CLOCKS
|
|
#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0
|
|
#define CONFIG_SYS_MEMTEST_END 0x1000
|
|
|
|
#define CONFIG_SYS_INIT_RAM_ADDR 0xFFFF0000
|
|
#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
|
|
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
|
|
CONFIG_SYS_INIT_RAM_SIZE - \
|
|
GENERATED_GBL_DATA_SIZE)
|
|
|
|
|
|
/* Extend size of kernel image for uncompression */
|
|
#define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024)
|
|
|
|
/* Boot FreeBSD/vxWorks from an ELF image */
|
|
#define CONFIG_SYS_MMC_MAX_DEVICE 1
|
|
|
|
/* MMC support */
|
|
#ifdef CONFIG_MMC_SDHCI_ZYNQ
|
|
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
|
|
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
|
|
#endif
|
|
|
|
/* Address in RAM where the parameters must be copied by SPL. */
|
|
#define CONFIG_SYS_SPL_ARGS_ADDR 0x10000000
|
|
|
|
#define CONFIG_SPL_FS_LOAD_ARGS_NAME "system.dtb"
|
|
#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage"
|
|
|
|
/* Not using MMC raw mode - just for compilation purpose */
|
|
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0
|
|
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0
|
|
#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0
|
|
|
|
/* qspi mode is working fine */
|
|
#ifdef CONFIG_ZYNQ_QSPI
|
|
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x100000
|
|
#define CONFIG_SYS_SPI_ARGS_OFFS 0x200000
|
|
#define CONFIG_SYS_SPI_ARGS_SIZE 0x80000
|
|
#define CONFIG_SYS_SPI_KERNEL_OFFS (CONFIG_SYS_SPI_ARGS_OFFS + \
|
|
CONFIG_SYS_SPI_ARGS_SIZE)
|
|
#endif
|
|
|
|
/* SP location before relocation, must use scratch RAM */
|
|
|
|
/* 3 * 64kB blocks of OCM - one is on the top because of bootrom */
|
|
#define CONFIG_SPL_MAX_SIZE 0x30000
|
|
|
|
/* On the top of OCM space */
|
|
#define CONFIG_SYS_SPL_MALLOC_START CONFIG_SPL_STACK_R_ADDR
|
|
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x2000000
|
|
|
|
/*
|
|
* SPL stack position - and stack goes down
|
|
* 0xfffffe00 is used for putting wfi loop.
|
|
* Set it up as limit for now.
|
|
*/
|
|
#define CONFIG_SPL_STACK 0xfffffe00
|
|
|
|
/* BSS setup */
|
|
#define CONFIG_SPL_BSS_START_ADDR 0x100000
|
|
#define CONFIG_SPL_BSS_MAX_SIZE 0x100000
|
|
|
|
#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x10000000
|
|
|
|
#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
|
|
|
|
#endif /* __CONFIG_ZYNQ_COMMON_H */
|