mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-27 15:12:21 +00:00
cdb749778a
While running from flash, i. e. before relocation, we have only a limited C runtime environment without writable data segment. In this phase, some configurations (for example with environment in EEPROM) must not use the normal getenv(), but a special function. This function had been called getenv_r(), with the idea that the "_r" suffix would mean the same as in the _r_eentrant versions of some of the C library functions (for example getdate vs. getdate_r, getgrent vs. getgrent_r, etc.). Unfortunately this was a misleading name, as in U-Boot the "_r" generally means "running from RAM", i. e. _after_ relocation. To avoid confusion, rename into getenv_f() [as "running from flash"] Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Detlev Zundel <dzu@denx.de> |
||
|---|---|---|
| .. | ||
| auto_update.c | ||
| cmd_trab.c | ||
| config.mk | ||
| flash.c | ||
| lowlevel_init.S | ||
| Makefile | ||
| memory.c | ||
| Pt1000_temp_data.h | ||
| README.kbd | ||
| rs485.c | ||
| rs485.h | ||
| trab.c | ||
| trab_fkt.c | ||
| tsc2000.c | ||
| tsc2000.h | ||
| u-boot.lds | ||
| vfd.c | ||
The TRAB keyboard implementation is similar to that for LWMON and R360MPI boards. The only difference concerns key naming. There are 4 keys on TRAB: 1, 2, 3, 4. 1) The "kbd" command provides information about the current state of the keys. For example, TRAB # kbd Keys: 1 0 1 0 means that keys 1 and 3 are pressed. The keyboard status is also stored in the "keybd" environment variable. In this example we get keybd=1010 2) The "preboot" variable is set according to current environment settings and keys pressed. This is an example: TRAB # setenv magic_keys XY TRAB # setenv key_magicX 12 TRAB # setenv key_cmdX echo ## Keys 1 + 2 pressed ##\;echo TRAB # setenv key_magicY 13 TRAB # setenv key_cmdY echo ## Keys 1 + 3 pressed ##\;echo Here "magic_keys=XY" means that the "key_magicX" and "key_magicY" variables will be checked for a match. Each variable "key_magic*" defines a set of keys. In the our example, if keys 1 and 3 are pressed during reset, then "key_magicY" matches, so the "preboot" variable will be set to the contents of "key_cmdY": preboot=echo ## Keys 1 + 3 pressed ##;echo 3) The TRAB board has optional modem support. When a certain key combination is pressed on the keyboard at power-on, the firmware performs the necessary initialization of the modem and allows for dial-in. The key combination is specified in the "include/configs/trab.h" file. For example: #define CONFIG_MODEM_KEY_MAGIC "23" means that modem will be initialized if and only if both keys 2, 3 are pressed. Note that the format of this string is similar to the format of "key_magic*" environment variables described above.