mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 17:07:38 +00:00
401d1c4f5d
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
1062 lines
28 KiB
C
1062 lines
28 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) ASPEED Technology Inc.
|
|
*/
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <ram.h>
|
|
#include <regmap.h>
|
|
#include <reset.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/scu_ast2600.h>
|
|
#include <asm/arch/sdram_ast2600.h>
|
|
#include <asm/global_data.h>
|
|
#include <linux/err.h>
|
|
#include <linux/kernel.h>
|
|
#include <dt-bindings/clock/ast2600-clock.h>
|
|
|
|
#define DDR_PHY_TBL_CHG_ADDR 0xaeeddeea
|
|
#define DDR_PHY_TBL_END 0xaeededed
|
|
|
|
#if defined(CONFIG_ASPEED_DDR4_800)
|
|
u32 ast2600_sdramphy_config[165] = {
|
|
0x1e6e0100, // start address
|
|
0x00000000, // phyr000
|
|
0x0c002062, // phyr004
|
|
0x1a7a0063, // phyr008
|
|
0x5a7a0063, // phyr00c
|
|
0x1a7a0063, // phyr010
|
|
0x1a7a0063, // phyr014
|
|
0x20000000, // phyr018
|
|
0x20000000, // phyr01c
|
|
0x20000000, // phyr020
|
|
0x20000000, // phyr024
|
|
0x00000008, // phyr028
|
|
0x00000000, // phyr02c
|
|
0x00077600, // phyr030
|
|
0x00000000, // phyr034
|
|
0x00000000, // phyr038
|
|
0x20000000, // phyr03c
|
|
0x50506000, // phyr040
|
|
0x50505050, // phyr044
|
|
0x00002f07, // phyr048
|
|
0x00003080, // phyr04c
|
|
0x04000000, // phyr050
|
|
0x00000200, // phyr054
|
|
0x03140201, // phyr058
|
|
0x04800000, // phyr05c
|
|
0x0800044e, // phyr060
|
|
0x00000000, // phyr064
|
|
0x00180008, // phyr068
|
|
0x00e00400, // phyr06c
|
|
0x00140206, // phyr070
|
|
0x1d4c0000, // phyr074
|
|
0x493e0107, // phyr078
|
|
0x08060404, // phyr07c
|
|
0x90000a00, // phyr080
|
|
0x06420618, // phyr084
|
|
0x00001002, // phyr088
|
|
0x05701016, // phyr08c
|
|
0x10000000, // phyr090
|
|
0xaeeddeea, // change address
|
|
0x1e6e019c, // new address
|
|
0x20202020, // phyr09c
|
|
0x20202020, // phyr0a0
|
|
0x00002020, // phyr0a4
|
|
0x00002020, // phyr0a8
|
|
0x00000001, // phyr0ac
|
|
0xaeeddeea, // change address
|
|
0x1e6e01cc, // new address
|
|
0x01010101, // phyr0cc
|
|
0x01010101, // phyr0d0
|
|
0x80808080, // phyr0d4
|
|
0x80808080, // phyr0d8
|
|
0xaeeddeea, // change address
|
|
0x1e6e0288, // new address
|
|
0x80808080, // phyr188
|
|
0x80808080, // phyr18c
|
|
0x80808080, // phyr190
|
|
0x80808080, // phyr194
|
|
0xaeeddeea, // change address
|
|
0x1e6e02f8, // new address
|
|
0x90909090, // phyr1f8
|
|
0x88888888, // phyr1fc
|
|
0xaeeddeea, // change address
|
|
0x1e6e0300, // new address
|
|
0x00000000, // phyr200
|
|
0xaeeddeea, // change address
|
|
0x1e6e0194, // new address
|
|
0x80118260, // phyr094
|
|
0xaeeddeea, // change address
|
|
0x1e6e019c, // new address
|
|
0x20202020, // phyr09c
|
|
0x20202020, // phyr0a0
|
|
0x00002020, // phyr0a4
|
|
0x80000000, // phyr0a8
|
|
0x00000001, // phyr0ac
|
|
0xaeeddeea, // change address
|
|
0x1e6e0318, // new address
|
|
0x09222719, // phyr218
|
|
0x00aa4403, // phyr21c
|
|
0xaeeddeea, // change address
|
|
0x1e6e0198, // new address
|
|
0x08060000, // phyr098
|
|
0xaeeddeea, // change address
|
|
0x1e6e01b0, // new address
|
|
0x00000000, // phyr0b0
|
|
0x00000000, // phyr0b4
|
|
0x00000000, // phyr0b8
|
|
0x00000000, // phyr0bc
|
|
0x00000000, // phyr0c0
|
|
0x00000000, // phyr0c4
|
|
0x000aff2c, // phyr0c8
|
|
0xaeeddeea, // change address
|
|
0x1e6e01dc, // new address
|
|
0x00080000, // phyr0dc
|
|
0x00000000, // phyr0e0
|
|
0xaa55aa55, // phyr0e4
|
|
0x55aa55aa, // phyr0e8
|
|
0xaaaa5555, // phyr0ec
|
|
0x5555aaaa, // phyr0f0
|
|
0xaa55aa55, // phyr0f4
|
|
0x55aa55aa, // phyr0f8
|
|
0xaaaa5555, // phyr0fc
|
|
0x5555aaaa, // phyr100
|
|
0xaa55aa55, // phyr104
|
|
0x55aa55aa, // phyr108
|
|
0xaaaa5555, // phyr10c
|
|
0x5555aaaa, // phyr110
|
|
0xaa55aa55, // phyr114
|
|
0x55aa55aa, // phyr118
|
|
0xaaaa5555, // phyr11c
|
|
0x5555aaaa, // phyr120
|
|
0x20202020, // phyr124
|
|
0x20202020, // phyr128
|
|
0x20202020, // phyr12c
|
|
0x20202020, // phyr130
|
|
0x20202020, // phyr134
|
|
0x20202020, // phyr138
|
|
0x20202020, // phyr13c
|
|
0x20202020, // phyr140
|
|
0x20202020, // phyr144
|
|
0x20202020, // phyr148
|
|
0x20202020, // phyr14c
|
|
0x20202020, // phyr150
|
|
0x20202020, // phyr154
|
|
0x20202020, // phyr158
|
|
0x20202020, // phyr15c
|
|
0x20202020, // phyr160
|
|
0x20202020, // phyr164
|
|
0x20202020, // phyr168
|
|
0x20202020, // phyr16c
|
|
0x20202020, // phyr170
|
|
0xaeeddeea, // change address
|
|
0x1e6e0298, // new address
|
|
0x20200800, // phyr198
|
|
0x20202020, // phyr19c
|
|
0x20202020, // phyr1a0
|
|
0x20202020, // phyr1a4
|
|
0x20202020, // phyr1a8
|
|
0x20202020, // phyr1ac
|
|
0x20202020, // phyr1b0
|
|
0x20202020, // phyr1b4
|
|
0x20202020, // phyr1b8
|
|
0x20202020, // phyr1bc
|
|
0x20202020, // phyr1c0
|
|
0x20202020, // phyr1c4
|
|
0x20202020, // phyr1c8
|
|
0x20202020, // phyr1cc
|
|
0x20202020, // phyr1d0
|
|
0x20202020, // phyr1d4
|
|
0x20202020, // phyr1d8
|
|
0x20202020, // phyr1dc
|
|
0x20202020, // phyr1e0
|
|
0x20202020, // phyr1e4
|
|
0x00002020, // phyr1e8
|
|
0xaeeddeea, // change address
|
|
0x1e6e0304, // new address
|
|
0x00000800, // phyr204
|
|
0xaeeddeea, // change address
|
|
0x1e6e027c, // new address
|
|
0x4e400000, // phyr17c
|
|
0x59595959, // phyr180
|
|
0x40404040, // phyr184
|
|
0xaeeddeea, // change address
|
|
0x1e6e02f4, // new address
|
|
0x00000059, // phyr1f4
|
|
0xaeededed, // end
|
|
};
|
|
#else
|
|
u32 ast2600_sdramphy_config[165] = {
|
|
0x1e6e0100, // start address
|
|
0x00000000, // phyr000
|
|
0x0c002062, // phyr004
|
|
0x1a7a0063, // phyr008
|
|
0x5a7a0063, // phyr00c
|
|
0x1a7a0063, // phyr010
|
|
0x1a7a0063, // phyr014
|
|
0x20000000, // phyr018
|
|
0x20000000, // phyr01c
|
|
0x20000000, // phyr020
|
|
0x20000000, // phyr024
|
|
0x00000008, // phyr028
|
|
0x00000000, // phyr02c
|
|
0x00077600, // phyr030
|
|
0x00000000, // phyr034
|
|
0x00000000, // phyr038
|
|
0x20000000, // phyr03c
|
|
0x50506000, // phyr040
|
|
0x50505050, // phyr044
|
|
0x00002f07, // phyr048
|
|
0x00003080, // phyr04c
|
|
0x04000000, // phyr050
|
|
0x00000200, // phyr054
|
|
0x03140501, // phyr058-rtt:40
|
|
0x04800000, // phyr05c
|
|
0x0800044e, // phyr060
|
|
0x00000000, // phyr064
|
|
0x00180008, // phyr068
|
|
0x00e00400, // phyr06c
|
|
0x00140206, // phyr070
|
|
0x1d4c0000, // phyr074
|
|
0x493e0107, // phyr078
|
|
0x08060404, // phyr07c
|
|
0x90000a00, // phyr080
|
|
0x06420c30, // phyr084
|
|
0x00001002, // phyr088
|
|
0x05701016, // phyr08c
|
|
0x10000000, // phyr090
|
|
0xaeeddeea, // change address
|
|
0x1e6e019c, // new address
|
|
0x20202020, // phyr09c
|
|
0x20202020, // phyr0a0
|
|
0x00002020, // phyr0a4
|
|
0x00002020, // phyr0a8
|
|
0x00000001, // phyr0ac
|
|
0xaeeddeea, // change address
|
|
0x1e6e01cc, // new address
|
|
0x01010101, // phyr0cc
|
|
0x01010101, // phyr0d0
|
|
0x80808080, // phyr0d4
|
|
0x80808080, // phyr0d8
|
|
0xaeeddeea, // change address
|
|
0x1e6e0288, // new address
|
|
0x80808080, // phyr188
|
|
0x80808080, // phyr18c
|
|
0x80808080, // phyr190
|
|
0x80808080, // phyr194
|
|
0xaeeddeea, // change address
|
|
0x1e6e02f8, // new address
|
|
0x90909090, // phyr1f8
|
|
0x88888888, // phyr1fc
|
|
0xaeeddeea, // change address
|
|
0x1e6e0300, // new address
|
|
0x00000000, // phyr200
|
|
0xaeeddeea, // change address
|
|
0x1e6e0194, // new address
|
|
0x801112e0, // phyr094 - bit12=1,15=0,- write window is ok
|
|
0xaeeddeea, // change address
|
|
0x1e6e019c, // new address
|
|
0x20202020, // phyr09c
|
|
0x20202020, // phyr0a0
|
|
0x00002020, // phyr0a4
|
|
0x80000000, // phyr0a8
|
|
0x00000001, // phyr0ac
|
|
0xaeeddeea, // change address
|
|
0x1e6e0318, // new address
|
|
0x09222719, // phyr218
|
|
0x00aa4403, // phyr21c
|
|
0xaeeddeea, // change address
|
|
0x1e6e0198, // new address
|
|
0x08060000, // phyr098
|
|
0xaeeddeea, // change address
|
|
0x1e6e01b0, // new address
|
|
0x00000000, // phyr0b0
|
|
0x00000000, // phyr0b4
|
|
0x00000000, // phyr0b8
|
|
0x00000000, // phyr0bc
|
|
0x00000000, // phyr0c0 - ori
|
|
0x00000000, // phyr0c4
|
|
0x000aff2c, // phyr0c8
|
|
0xaeeddeea, // change address
|
|
0x1e6e01dc, // new address
|
|
0x00080000, // phyr0dc
|
|
0x00000000, // phyr0e0
|
|
0xaa55aa55, // phyr0e4
|
|
0x55aa55aa, // phyr0e8
|
|
0xaaaa5555, // phyr0ec
|
|
0x5555aaaa, // phyr0f0
|
|
0xaa55aa55, // phyr0f4
|
|
0x55aa55aa, // phyr0f8
|
|
0xaaaa5555, // phyr0fc
|
|
0x5555aaaa, // phyr100
|
|
0xaa55aa55, // phyr104
|
|
0x55aa55aa, // phyr108
|
|
0xaaaa5555, // phyr10c
|
|
0x5555aaaa, // phyr110
|
|
0xaa55aa55, // phyr114
|
|
0x55aa55aa, // phyr118
|
|
0xaaaa5555, // phyr11c
|
|
0x5555aaaa, // phyr120
|
|
0x20202020, // phyr124
|
|
0x20202020, // phyr128
|
|
0x20202020, // phyr12c
|
|
0x20202020, // phyr130
|
|
0x20202020, // phyr134
|
|
0x20202020, // phyr138
|
|
0x20202020, // phyr13c
|
|
0x20202020, // phyr140
|
|
0x20202020, // phyr144
|
|
0x20202020, // phyr148
|
|
0x20202020, // phyr14c
|
|
0x20202020, // phyr150
|
|
0x20202020, // phyr154
|
|
0x20202020, // phyr158
|
|
0x20202020, // phyr15c
|
|
0x20202020, // phyr160
|
|
0x20202020, // phyr164
|
|
0x20202020, // phyr168
|
|
0x20202020, // phyr16c
|
|
0x20202020, // phyr170
|
|
0xaeeddeea, // change address
|
|
0x1e6e0298, // new address
|
|
0x20200800, // phyr198
|
|
0x20202020, // phyr19c
|
|
0x20202020, // phyr1a0
|
|
0x20202020, // phyr1a4
|
|
0x20202020, // phyr1a8
|
|
0x20202020, // phyr1ac
|
|
0x20202020, // phyr1b0
|
|
0x20202020, // phyr1b4
|
|
0x20202020, // phyr1b8
|
|
0x20202020, // phyr1bc
|
|
0x20202020, // phyr1c0
|
|
0x20202020, // phyr1c4
|
|
0x20202020, // phyr1c8
|
|
0x20202020, // phyr1cc
|
|
0x20202020, // phyr1d0
|
|
0x20202020, // phyr1d4
|
|
0x20202020, // phyr1d8
|
|
0x20202020, // phyr1dc
|
|
0x20202020, // phyr1e0
|
|
0x20202020, // phyr1e4
|
|
0x00002020, // phyr1e8
|
|
0xaeeddeea, // change address
|
|
0x1e6e0304, // new address
|
|
0x00000800, // phyr204
|
|
0xaeeddeea, // change address
|
|
0x1e6e027c, // new address
|
|
0x4e400000, // phyr17c
|
|
0x59595959, // phyr180
|
|
0x40404040, // phyr184
|
|
0xaeeddeea, // change address
|
|
0x1e6e02f4, // new address
|
|
0x00000059, // phyr1f4
|
|
0xaeededed, // end
|
|
};
|
|
#endif
|
|
|
|
/* MPLL configuration */
|
|
#define SCU_MPLL_FREQ_400M 0x0008405F
|
|
#define SCU_MPLL_EXT_400M 0x0000002F
|
|
#define SCU_MPLL_FREQ_333M 0x00488299
|
|
#define SCU_MPLL_EXT_333M 0x0000014C
|
|
#define SCU_MPLL_FREQ_200M 0x0078007F
|
|
#define SCU_MPLL_EXT_200M 0x0000003F
|
|
#define SCU_MPLL_FREQ_100M 0x0078003F
|
|
#define SCU_MPLL_EXT_100M 0x0000001F
|
|
|
|
#if defined(CONFIG_ASPEED_DDR4_1600)
|
|
#define SCU_MPLL_FREQ_CFG SCU_MPLL_FREQ_400M
|
|
#define SCU_MPLL_EXT_CFG SCU_MPLL_EXT_400M
|
|
#elif defined(CONFIG_ASPEED_DDR4_1333)
|
|
#define SCU_MPLL_FREQ_CFG SCU_MPLL_FREQ_333M
|
|
#define SCU_MPLL_EXT_CFG SCU_MPLL_EXT_333M
|
|
#elif defined(CONFIG_ASPEED_DDR4_800)
|
|
#define SCU_MPLL_FREQ_CFG SCU_MPLL_FREQ_200M
|
|
#define SCU_MPLL_EXT_CFG SCU_MPLL_EXT_200M
|
|
#elif defined(CONFIG_ASPEED_DDR4_400)
|
|
#define SCU_MPLL_FREQ_CFG SCU_MPLL_FREQ_100M
|
|
#define SCU_MPLL_EXT_CFG SCU_MPLL_EXT_100M
|
|
#else
|
|
#error "undefined DDR4 target rate\n"
|
|
#endif
|
|
|
|
/*
|
|
* AC timing and SDRAM mode register setting
|
|
* for real chip are derived from the model GDDR4-1600
|
|
*/
|
|
#define DDR4_MR01_MODE 0x03010510
|
|
#define DDR4_MR23_MODE 0x00000000
|
|
#define DDR4_MR45_MODE 0x04000000
|
|
#define DDR4_MR6_MODE 0x00000400
|
|
#define DDR4_TRFC_1600 0x467299f1
|
|
#define DDR4_TRFC_1333 0x3a5f80c9
|
|
#define DDR4_TRFC_800 0x23394c78
|
|
#define DDR4_TRFC_400 0x111c263c
|
|
|
|
#if defined(CONFIG_ASPEED_DDR4_1600)
|
|
#define DDR4_TRFC DDR4_TRFC_1600
|
|
#define DDR4_PHY_TRAIN_TRFC 0xc30
|
|
#elif defined(CONFIG_ASPEED_DDR4_1333)
|
|
#define DDR4_TRFC DDR4_TRFC_1333
|
|
#define DDR4_PHY_TRAIN_TRFC 0xa25
|
|
#elif defined(CONFIG_ASPEED_DDR4_800)
|
|
#define DDR4_TRFC DDR4_TRFC_800
|
|
#define DDR4_PHY_TRAIN_TRFC 0x618
|
|
#elif defined(CONFIG_ASPEED_DDR4_400)
|
|
#define DDR4_TRFC DDR4_TRFC_400
|
|
#define DDR4_PHY_TRAIN_TRFC 0x30c
|
|
#else
|
|
#error "undefined tRFC setting"
|
|
#endif
|
|
|
|
/* supported SDRAM size */
|
|
#define SDRAM_SIZE_1KB (1024U)
|
|
#define SDRAM_SIZE_1MB (SDRAM_SIZE_1KB * SDRAM_SIZE_1KB)
|
|
#define SDRAM_MIN_SIZE (256 * SDRAM_SIZE_1MB)
|
|
#define SDRAM_MAX_SIZE (2048 * SDRAM_SIZE_1MB)
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static const u32 ddr4_ac_timing[4] = {
|
|
0x040e0307, 0x0f4711f1, 0x0e060304, 0x00001240 };
|
|
static const u32 ddr_max_grant_params[4] = {
|
|
0x44444444, 0x44444444, 0x44444444, 0x44444444 };
|
|
|
|
struct dram_info {
|
|
struct ram_info info;
|
|
struct clk ddr_clk;
|
|
struct ast2600_sdrammc_regs *regs;
|
|
struct ast2600_scu *scu;
|
|
struct ast2600_ddr_phy *phy;
|
|
void __iomem *phy_setting;
|
|
void __iomem *phy_status;
|
|
ulong clock_rate;
|
|
};
|
|
|
|
static void ast2600_sdramphy_kick_training(struct dram_info *info)
|
|
{
|
|
u32 data;
|
|
struct ast2600_sdrammc_regs *regs = info->regs;
|
|
|
|
writel(SDRAM_PHYCTRL0_NRST, ®s->phy_ctrl[0]);
|
|
udelay(5);
|
|
writel(SDRAM_PHYCTRL0_NRST | SDRAM_PHYCTRL0_INIT, ®s->phy_ctrl[0]);
|
|
udelay(1000);
|
|
|
|
while (1) {
|
|
data = readl(®s->phy_ctrl[0]) & SDRAM_PHYCTRL0_INIT;
|
|
if (~data)
|
|
break;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief load DDR-PHY configurations table to the PHY registers
|
|
* @param[in] p_tbl - pointer to the configuration table
|
|
* @param[in] info - pointer to the DRAM info struct
|
|
*
|
|
* There are two sets of MRS (Mode Registers) configuration in ast2600 memory
|
|
* system: one is in the SDRAM MC (memory controller) which is used in run
|
|
* time, and the other is in the DDR-PHY IP which is used during DDR-PHY
|
|
* training.
|
|
*/
|
|
static void ast2600_sdramphy_init(u32 *p_tbl, struct dram_info *info)
|
|
{
|
|
u32 reg_base = (u32)info->phy_setting;
|
|
u32 addr = p_tbl[0];
|
|
u32 data;
|
|
int i = 1;
|
|
|
|
writel(0, &info->regs->phy_ctrl[0]);
|
|
udelay(10);
|
|
|
|
while (1) {
|
|
if (addr < reg_base) {
|
|
debug("invalid DDR-PHY addr: 0x%08x\n", addr);
|
|
break;
|
|
}
|
|
data = p_tbl[i++];
|
|
|
|
if (data == DDR_PHY_TBL_END) {
|
|
break;
|
|
} else if (data == DDR_PHY_TBL_CHG_ADDR) {
|
|
addr = p_tbl[i++];
|
|
} else {
|
|
writel(data, addr);
|
|
addr += 4;
|
|
}
|
|
}
|
|
|
|
data = readl(info->phy_setting + 0x84) & ~GENMASK(16, 0);
|
|
data |= DDR4_PHY_TRAIN_TRFC;
|
|
writel(data, info->phy_setting + 0x84);
|
|
}
|
|
|
|
static int ast2600_sdramphy_check_status(struct dram_info *info)
|
|
{
|
|
u32 value, tmp;
|
|
u32 reg_base = (u32)info->phy_status;
|
|
int need_retrain = 0;
|
|
|
|
debug("\nSDRAM PHY training report:\n");
|
|
|
|
/* training status */
|
|
value = readl(reg_base + 0x00);
|
|
debug("rO_DDRPHY_reg offset 0x00 = 0x%08x\n", value);
|
|
|
|
if (value & BIT(3))
|
|
debug("\tinitial PVT calibration fail\n");
|
|
|
|
if (value & BIT(5))
|
|
debug("\truntime calibration fail\n");
|
|
|
|
/* PU & PD */
|
|
value = readl(reg_base + 0x30);
|
|
debug("rO_DDRPHY_reg offset 0x30 = 0x%08x\n", value);
|
|
debug(" PU = 0x%02x\n", value & 0xff);
|
|
debug(" PD = 0x%02x\n", (value >> 16) & 0xff);
|
|
|
|
/* read eye window */
|
|
value = readl(reg_base + 0x68);
|
|
if (0 == (value & GENMASK(7, 0)))
|
|
need_retrain = 1;
|
|
|
|
debug("rO_DDRPHY_reg offset 0x68 = 0x%08x\n", value);
|
|
debug(" rising edge of read data eye training pass window\n");
|
|
tmp = (((value & GENMASK(7, 0)) >> 0) * 100) / 255;
|
|
debug(" B0:%d%%\n", tmp);
|
|
tmp = (((value & GENMASK(15, 8)) >> 8) * 100) / 255;
|
|
debug(" B1:%d%%\n", tmp);
|
|
|
|
value = readl(reg_base + 0xC8);
|
|
debug("rO_DDRPHY_reg offset 0xC8 = 0x%08x\n", value);
|
|
debug(" falling edge of read data eye training pass window\n");
|
|
tmp = (((value & GENMASK(7, 0)) >> 0) * 100) / 255;
|
|
debug(" B0:%d%%\n", tmp);
|
|
tmp = (((value & GENMASK(15, 8)) >> 8) * 100) / 255;
|
|
debug(" B1:%d%%\n", tmp);
|
|
|
|
/* write eye window */
|
|
value = readl(reg_base + 0x7c);
|
|
if (0 == (value & GENMASK(7, 0)))
|
|
need_retrain = 1;
|
|
|
|
debug("rO_DDRPHY_reg offset 0x7C = 0x%08x\n", value);
|
|
debug(" rising edge of write data eye training pass window\n");
|
|
tmp = (((value & GENMASK(7, 0)) >> 0) * 100) / 255;
|
|
debug(" B0:%d%%\n", tmp);
|
|
tmp = (((value & GENMASK(15, 8)) >> 8) * 100) / 255;
|
|
debug(" B1:%d%%\n", tmp);
|
|
|
|
/* read Vref training result */
|
|
value = readl(reg_base + 0x88);
|
|
debug("rO_DDRPHY_reg offset 0x88 = 0x%08x\n", value);
|
|
debug(" read Vref training result\n");
|
|
tmp = (((value & GENMASK(7, 0)) >> 0) * 100) / 127;
|
|
debug(" B0:%d%%\n", tmp);
|
|
tmp = (((value & GENMASK(15, 8)) >> 8) * 100) / 127;
|
|
debug(" B1:%d%%\n", tmp);
|
|
|
|
/* write Vref training result */
|
|
value = readl(reg_base + 0x90);
|
|
debug("rO_DDRPHY_reg offset 0x90 = 0x%08x\n", value);
|
|
|
|
/* gate train */
|
|
value = readl(reg_base + 0x50);
|
|
if ((0 == (value & GENMASK(15, 0))) ||
|
|
(0 == (value & GENMASK(31, 16)))) {
|
|
need_retrain = 1;
|
|
}
|
|
|
|
debug("rO_DDRPHY_reg offset 0x50 = 0x%08x\n", value);
|
|
|
|
return need_retrain;
|
|
}
|
|
|
|
#ifndef CONFIG_ASPEED_BYPASS_SELFTEST
|
|
#define MC_TEST_PATTERN_N 8
|
|
static u32 as2600_sdrammc_test_pattern[MC_TEST_PATTERN_N] = {
|
|
0xcc33cc33, 0xff00ff00, 0xaa55aa55, 0x88778877,
|
|
0x92cc4d6e, 0x543d3cde, 0xf1e843c7, 0x7c61d253 };
|
|
|
|
#define TIMEOUT_DRAM 5000000
|
|
int ast2600_sdrammc_dg_test(struct dram_info *info, unsigned int datagen, u32 mode)
|
|
{
|
|
unsigned int data;
|
|
unsigned int timeout = 0;
|
|
struct ast2600_sdrammc_regs *regs = info->regs;
|
|
|
|
writel(0, ®s->ecc_test_ctrl);
|
|
|
|
if (mode == 0)
|
|
writel(0x00000085 | (datagen << 3), ®s->ecc_test_ctrl);
|
|
else
|
|
writel(0x000000C1 | (datagen << 3), ®s->ecc_test_ctrl);
|
|
|
|
do {
|
|
data = readl(®s->ecc_test_ctrl) & GENMASK(13, 12);
|
|
|
|
if (data & BIT(13))
|
|
return 0;
|
|
|
|
if (++timeout > TIMEOUT_DRAM) {
|
|
debug("Timeout!!\n");
|
|
writel(0, ®s->ecc_test_ctrl);
|
|
return -1;
|
|
}
|
|
} while (!data);
|
|
|
|
writel(0, ®s->ecc_test_ctrl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ast2600_sdrammc_cbr_test(struct dram_info *info)
|
|
{
|
|
u32 i;
|
|
struct ast2600_sdrammc_regs *regs = info->regs;
|
|
|
|
clrsetbits_le32(®s->test_addr, GENMASK(30, 4), 0x7ffff0);
|
|
|
|
/* single */
|
|
for (i = 0; i < 8; i++)
|
|
if (ast2600_sdrammc_dg_test(info, i, 0))
|
|
return -1;
|
|
|
|
/* burst */
|
|
for (i = 0; i < 8; i++)
|
|
if (ast2600_sdrammc_dg_test(info, i, i))
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ast2600_sdrammc_test(struct dram_info *info)
|
|
{
|
|
struct ast2600_sdrammc_regs *regs = info->regs;
|
|
|
|
u32 pass_cnt = 0;
|
|
u32 fail_cnt = 0;
|
|
u32 target_cnt = 2;
|
|
u32 test_cnt = 0;
|
|
u32 pattern;
|
|
u32 i = 0;
|
|
bool finish = false;
|
|
|
|
debug("sdram mc test:\n");
|
|
while (!finish) {
|
|
pattern = as2600_sdrammc_test_pattern[i++];
|
|
i = i % MC_TEST_PATTERN_N;
|
|
debug(" pattern = %08X : ", pattern);
|
|
writel(pattern, ®s->test_init_val);
|
|
|
|
if (ast2600_sdrammc_cbr_test(info)) {
|
|
debug("fail\n");
|
|
fail_cnt++;
|
|
} else {
|
|
debug("pass\n");
|
|
pass_cnt++;
|
|
}
|
|
|
|
if (++test_cnt == target_cnt)
|
|
finish = true;
|
|
}
|
|
debug("statistics: pass/fail/total:%d/%d/%d\n", pass_cnt, fail_cnt,
|
|
target_cnt);
|
|
|
|
return fail_cnt;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* scu500[14:13]
|
|
* 2b'00: VGA memory size = 16MB
|
|
* 2b'01: VGA memory size = 16MB
|
|
* 2b'10: VGA memory size = 32MB
|
|
* 2b'11: VGA memory size = 64MB
|
|
*
|
|
* mcr04[3:2]
|
|
* 2b'00: VGA memory size = 8MB
|
|
* 2b'01: VGA memory size = 16MB
|
|
* 2b'10: VGA memory size = 32MB
|
|
* 2b'11: VGA memory size = 64MB
|
|
*/
|
|
static size_t ast2600_sdrammc_get_vga_mem_size(struct dram_info *info)
|
|
{
|
|
u32 vga_hwconf;
|
|
size_t vga_mem_size_base = 8 * 1024 * 1024;
|
|
|
|
vga_hwconf =
|
|
(readl(&info->scu->hwstrap1) & SCU_HWSTRAP1_VGA_MEM_MASK) >>
|
|
SCU_HWSTRAP1_VGA_MEM_SHIFT;
|
|
|
|
if (vga_hwconf == 0) {
|
|
vga_hwconf = 1;
|
|
writel(vga_hwconf << SCU_HWSTRAP1_VGA_MEM_SHIFT,
|
|
&info->scu->hwstrap1);
|
|
}
|
|
|
|
clrsetbits_le32(&info->regs->config, SDRAM_CONF_VGA_SIZE_MASK,
|
|
((vga_hwconf << SDRAM_CONF_VGA_SIZE_SHIFT) &
|
|
SDRAM_CONF_VGA_SIZE_MASK));
|
|
|
|
/* no need to reserve VGA memory if efuse[VGA disable] is set */
|
|
if (readl(&info->scu->efuse) & SCU_EFUSE_DIS_VGA)
|
|
return 0;
|
|
|
|
return vga_mem_size_base << vga_hwconf;
|
|
}
|
|
|
|
/*
|
|
* Find out RAM size and save it in dram_info
|
|
*
|
|
* The procedure is taken from Aspeed SDK
|
|
*/
|
|
static void ast2600_sdrammc_calc_size(struct dram_info *info)
|
|
{
|
|
/* The controller supports 256/512/1024/2048 MB ram */
|
|
size_t ram_size = SDRAM_MIN_SIZE;
|
|
const int write_test_offset = 0x100000;
|
|
u32 test_pattern = 0xdeadbeef;
|
|
u32 cap_param = SDRAM_CONF_CAP_2048M;
|
|
u32 refresh_timing_param = DDR4_TRFC;
|
|
const u32 write_addr_base = CONFIG_SYS_SDRAM_BASE + write_test_offset;
|
|
|
|
for (ram_size = SDRAM_MAX_SIZE; ram_size > SDRAM_MIN_SIZE;
|
|
ram_size >>= 1) {
|
|
writel(test_pattern, write_addr_base + (ram_size >> 1));
|
|
test_pattern = (test_pattern >> 4) | (test_pattern << 28);
|
|
}
|
|
|
|
/* One last write to overwrite all wrapped values */
|
|
writel(test_pattern, write_addr_base);
|
|
|
|
/* Reset the pattern and see which value was really written */
|
|
test_pattern = 0xdeadbeef;
|
|
for (ram_size = SDRAM_MAX_SIZE; ram_size > SDRAM_MIN_SIZE;
|
|
ram_size >>= 1) {
|
|
if (readl(write_addr_base + (ram_size >> 1)) == test_pattern)
|
|
break;
|
|
|
|
--cap_param;
|
|
refresh_timing_param >>= 8;
|
|
test_pattern = (test_pattern >> 4) | (test_pattern << 28);
|
|
}
|
|
|
|
clrsetbits_le32(&info->regs->ac_timing[1],
|
|
(SDRAM_AC_TRFC_MASK << SDRAM_AC_TRFC_SHIFT),
|
|
((refresh_timing_param & SDRAM_AC_TRFC_MASK)
|
|
<< SDRAM_AC_TRFC_SHIFT));
|
|
|
|
info->info.base = CONFIG_SYS_SDRAM_BASE;
|
|
info->info.size = ram_size - ast2600_sdrammc_get_vga_mem_size(info);
|
|
|
|
clrsetbits_le32(&info->regs->config, SDRAM_CONF_CAP_MASK,
|
|
((cap_param << SDRAM_CONF_CAP_SHIFT) & SDRAM_CONF_CAP_MASK));
|
|
}
|
|
|
|
static int ast2600_sdrammc_init_ddr4(struct dram_info *info)
|
|
{
|
|
const u32 power_ctrl = MCR34_CKE_EN | MCR34_AUTOPWRDN_EN |
|
|
MCR34_MREQ_BYPASS_DIS | MCR34_RESETN_DIS |
|
|
MCR34_ODT_EN | MCR34_ODT_AUTO_ON |
|
|
(0x1 << MCR34_ODT_EXT_SHIFT);
|
|
|
|
/* init SDRAM-PHY only on real chip */
|
|
ast2600_sdramphy_init(ast2600_sdramphy_config, info);
|
|
writel((MCR34_CKE_EN | MCR34_MREQI_DIS | MCR34_RESETN_DIS),
|
|
&info->regs->power_ctrl);
|
|
udelay(5);
|
|
ast2600_sdramphy_kick_training(info);
|
|
udelay(500);
|
|
writel(SDRAM_RESET_DLL_ZQCL_EN, &info->regs->refresh_timing);
|
|
|
|
writel(MCR30_SET_MR(3), &info->regs->mode_setting_control);
|
|
writel(MCR30_SET_MR(6), &info->regs->mode_setting_control);
|
|
writel(MCR30_SET_MR(5), &info->regs->mode_setting_control);
|
|
writel(MCR30_SET_MR(4), &info->regs->mode_setting_control);
|
|
writel(MCR30_SET_MR(2), &info->regs->mode_setting_control);
|
|
writel(MCR30_SET_MR(1), &info->regs->mode_setting_control);
|
|
writel(MCR30_SET_MR(0) | MCR30_RESET_DLL_DELAY_EN,
|
|
&info->regs->mode_setting_control);
|
|
|
|
writel(SDRAM_REFRESH_EN | SDRAM_RESET_DLL_ZQCL_EN |
|
|
(0x5f << SDRAM_REFRESH_PERIOD_SHIFT),
|
|
&info->regs->refresh_timing);
|
|
|
|
/* wait self-refresh idle */
|
|
while (readl(&info->regs->power_ctrl) &
|
|
MCR34_SELF_REFRESH_STATUS_MASK)
|
|
;
|
|
|
|
writel(SDRAM_REFRESH_EN | SDRAM_LOW_PRI_REFRESH_EN |
|
|
SDRAM_REFRESH_ZQCS_EN |
|
|
(0x5f << SDRAM_REFRESH_PERIOD_SHIFT) |
|
|
(0x42aa << SDRAM_REFRESH_PERIOD_ZQCS_SHIFT),
|
|
&info->regs->refresh_timing);
|
|
|
|
writel(power_ctrl, &info->regs->power_ctrl);
|
|
udelay(500);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ast2600_sdrammc_unlock(struct dram_info *info)
|
|
{
|
|
writel(SDRAM_UNLOCK_KEY, &info->regs->protection_key);
|
|
while (!readl(&info->regs->protection_key))
|
|
;
|
|
}
|
|
|
|
static void ast2600_sdrammc_lock(struct dram_info *info)
|
|
{
|
|
writel(~SDRAM_UNLOCK_KEY, &info->regs->protection_key);
|
|
while (readl(&info->regs->protection_key))
|
|
;
|
|
}
|
|
|
|
static void ast2600_sdrammc_common_init(struct ast2600_sdrammc_regs *regs)
|
|
{
|
|
int i;
|
|
|
|
writel(MCR34_MREQI_DIS | MCR34_RESETN_DIS, ®s->power_ctrl);
|
|
writel(SDRAM_VIDEO_UNLOCK_KEY, ®s->gm_protection_key);
|
|
writel(0x10 << MCR38_RW_MAX_GRANT_CNT_RQ_SHIFT,
|
|
®s->arbitration_ctrl);
|
|
writel(0xFFBBFFF4, ®s->req_limit_mask);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ddr_max_grant_params); ++i)
|
|
writel(ddr_max_grant_params[i], ®s->max_grant_len[i]);
|
|
|
|
writel(MCR50_RESET_ALL_INTR, ®s->intr_ctrl);
|
|
|
|
writel(0x07FFFFFF, ®s->ecc_range_ctrl);
|
|
|
|
writel(0, ®s->ecc_test_ctrl);
|
|
writel(0x80000001, ®s->test_addr);
|
|
writel(0, ®s->test_fail_dq_bit);
|
|
writel(0, ®s->test_init_val);
|
|
|
|
writel(0xFFFFFFFF, ®s->req_input_ctrl);
|
|
writel(0, ®s->req_high_pri_ctrl);
|
|
|
|
udelay(600);
|
|
|
|
#ifdef CONFIG_ASPEED_DDR4_DUALX8
|
|
writel(0x37, ®s->config);
|
|
#else
|
|
writel(0x17, ®s->config);
|
|
#endif
|
|
|
|
/* load controller setting */
|
|
for (i = 0; i < ARRAY_SIZE(ddr4_ac_timing); ++i)
|
|
writel(ddr4_ac_timing[i], ®s->ac_timing[i]);
|
|
|
|
writel(DDR4_MR01_MODE, ®s->mr01_mode_setting);
|
|
writel(DDR4_MR23_MODE, ®s->mr23_mode_setting);
|
|
writel(DDR4_MR45_MODE, ®s->mr45_mode_setting);
|
|
writel(DDR4_MR6_MODE, ®s->mr6_mode_setting);
|
|
}
|
|
|
|
/*
|
|
* Update size info according to the ECC HW setting
|
|
*
|
|
* Assume SDRAM has been initialized by SPL or the host. To get the RAM size, we
|
|
* don't need to calculate the ECC size again but read from MCR04 and derive the
|
|
* size from its value.
|
|
*/
|
|
static void ast2600_sdrammc_update_size(struct dram_info *info)
|
|
{
|
|
struct ast2600_sdrammc_regs *regs = info->regs;
|
|
u32 conf = readl(®s->config);
|
|
u32 cap_param;
|
|
size_t ram_size = SDRAM_MAX_SIZE;
|
|
size_t hw_size;
|
|
|
|
cap_param = (conf & SDRAM_CONF_CAP_MASK) >> SDRAM_CONF_CAP_SHIFT;
|
|
switch (cap_param) {
|
|
case SDRAM_CONF_CAP_2048M:
|
|
ram_size = 2048 * SDRAM_SIZE_1MB;
|
|
break;
|
|
case SDRAM_CONF_CAP_1024M:
|
|
ram_size = 1024 * SDRAM_SIZE_1MB;
|
|
break;
|
|
case SDRAM_CONF_CAP_512M:
|
|
ram_size = 512 * SDRAM_SIZE_1MB;
|
|
break;
|
|
case SDRAM_CONF_CAP_256M:
|
|
ram_size = 256 * SDRAM_SIZE_1MB;
|
|
break;
|
|
}
|
|
|
|
info->info.base = CONFIG_SYS_SDRAM_BASE;
|
|
info->info.size = ram_size - ast2600_sdrammc_get_vga_mem_size(info);
|
|
|
|
if (0 == (conf & SDRAM_CONF_ECC_SETUP))
|
|
return;
|
|
|
|
hw_size = readl(®s->ecc_range_ctrl) & SDRAM_ECC_RANGE_ADDR_MASK;
|
|
hw_size += (1 << SDRAM_ECC_RANGE_ADDR_SHIFT);
|
|
|
|
info->info.size = hw_size;
|
|
}
|
|
|
|
#ifdef CONFIG_ASPEED_ECC
|
|
static void ast2600_sdrammc_ecc_enable(struct dram_info *info)
|
|
{
|
|
struct ast2600_sdrammc_regs *regs = info->regs;
|
|
size_t conf_size;
|
|
u32 reg;
|
|
|
|
conf_size = CONFIG_ASPEED_ECC_SIZE * SDRAM_SIZE_1MB;
|
|
if (conf_size > info->info.size) {
|
|
printf("warning: ECC configured %dMB but actual size is %dMB\n",
|
|
CONFIG_ASPEED_ECC_SIZE,
|
|
info->info.size / SDRAM_SIZE_1MB);
|
|
conf_size = info->info.size;
|
|
} else if (conf_size == 0) {
|
|
conf_size = info->info.size;
|
|
}
|
|
|
|
info->info.size = (((conf_size / 9) * 8) >> 20) << 20;
|
|
writel(((info->info.size >> 20) - 1) << 20, ®s->ecc_range_ctrl);
|
|
reg = readl(®s->config) | SDRAM_CONF_ECC_SETUP;
|
|
writel(reg, ®s->config);
|
|
|
|
writel(0, ®s->test_init_val);
|
|
writel(0x80000001, ®s->test_addr);
|
|
writel(0x221, ®s->ecc_test_ctrl);
|
|
while (0 == (readl(®s->ecc_test_ctrl) & BIT(12)))
|
|
;
|
|
writel(0, ®s->ecc_test_ctrl);
|
|
writel(BIT(31), ®s->intr_ctrl);
|
|
writel(0, ®s->intr_ctrl);
|
|
}
|
|
#endif
|
|
|
|
static int ast2600_sdrammc_probe(struct udevice *dev)
|
|
{
|
|
int ret;
|
|
u32 reg;
|
|
struct dram_info *priv = (struct dram_info *)dev_get_priv(dev);
|
|
struct ast2600_sdrammc_regs *regs = priv->regs;
|
|
struct udevice *clk_dev;
|
|
|
|
/* find SCU base address from clock device */
|
|
ret = uclass_get_device_by_driver(UCLASS_CLK,
|
|
DM_DRIVER_GET(aspeed_ast2600_scu), &clk_dev);
|
|
if (ret) {
|
|
debug("clock device not defined\n");
|
|
return ret;
|
|
}
|
|
|
|
priv->scu = devfdt_get_addr_ptr(clk_dev);
|
|
if (IS_ERR(priv->scu)) {
|
|
debug("%s(): can't get SCU\n", __func__);
|
|
return PTR_ERR(priv->scu);
|
|
}
|
|
|
|
if (readl(&priv->scu->dram_hdshk) & SCU_DRAM_HDSHK_RDY) {
|
|
printf("already initialized, ");
|
|
ast2600_sdrammc_update_size(priv);
|
|
return 0;
|
|
}
|
|
|
|
reg = readl(&priv->scu->mpll);
|
|
reg &= ~(SCU_PLL_BYPASS | SCU_PLL_DIV_MASK |
|
|
SCU_PLL_DENUM_MASK | SCU_PLL_NUM_MASK);
|
|
reg |= (SCU_PLL_RST | SCU_PLL_OFF | SCU_MPLL_FREQ_CFG);
|
|
writel(reg, &priv->scu->mpll);
|
|
writel(SCU_MPLL_EXT_CFG, &priv->scu->mpll_ext);
|
|
udelay(100);
|
|
reg &= ~(SCU_PLL_RST | SCU_PLL_OFF);
|
|
writel(reg, &priv->scu->mpll);
|
|
|
|
while ((readl(&priv->scu->mpll_ext) & BIT(31)) == 0)
|
|
;
|
|
|
|
ast2600_sdrammc_unlock(priv);
|
|
ast2600_sdrammc_common_init(regs);
|
|
L_ast2600_sdramphy_train:
|
|
ast2600_sdrammc_init_ddr4(priv);
|
|
|
|
/* make sure DDR-PHY is ready before access */
|
|
do {
|
|
reg = readl(priv->phy_status) & BIT(1);
|
|
} while (reg == 0);
|
|
|
|
if (ast2600_sdramphy_check_status(priv) != 0) {
|
|
printf("DDR4 PHY training fail, retrain\n");
|
|
goto L_ast2600_sdramphy_train;
|
|
}
|
|
|
|
ast2600_sdrammc_calc_size(priv);
|
|
|
|
#ifndef CONFIG_ASPEED_BYPASS_SELFTEST
|
|
if (ast2600_sdrammc_test(priv) != 0) {
|
|
printf("%s: DDR4 init fail\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_ASPEED_ECC
|
|
ast2600_sdrammc_ecc_enable(priv);
|
|
#endif
|
|
|
|
writel(readl(&priv->scu->dram_hdshk) | SCU_DRAM_HDSHK_RDY,
|
|
&priv->scu->dram_hdshk);
|
|
|
|
clrbits_le32(®s->intr_ctrl, MCR50_RESET_ALL_INTR);
|
|
ast2600_sdrammc_lock(priv);
|
|
return 0;
|
|
}
|
|
|
|
static int ast2600_sdrammc_of_to_plat(struct udevice *dev)
|
|
{
|
|
struct dram_info *priv = dev_get_priv(dev);
|
|
|
|
priv->regs = (void *)(uintptr_t)devfdt_get_addr_index(dev, 0);
|
|
priv->phy_setting = (void *)(uintptr_t)devfdt_get_addr_index(dev, 1);
|
|
priv->phy_status = (void *)(uintptr_t)devfdt_get_addr_index(dev, 2);
|
|
|
|
priv->clock_rate = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
|
|
"clock-frequency", 0);
|
|
if (!priv->clock_rate) {
|
|
debug("DDR Clock Rate not defined\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ast2600_sdrammc_get_info(struct udevice *dev, struct ram_info *info)
|
|
{
|
|
struct dram_info *priv = dev_get_priv(dev);
|
|
|
|
*info = priv->info;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct ram_ops ast2600_sdrammc_ops = {
|
|
.get_info = ast2600_sdrammc_get_info,
|
|
};
|
|
|
|
static const struct udevice_id ast2600_sdrammc_ids[] = {
|
|
{ .compatible = "aspeed,ast2600-sdrammc" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(sdrammc_ast2600) = {
|
|
.name = "aspeed_ast2600_sdrammc",
|
|
.id = UCLASS_RAM,
|
|
.of_match = ast2600_sdrammc_ids,
|
|
.ops = &ast2600_sdrammc_ops,
|
|
.of_to_plat = ast2600_sdrammc_of_to_plat,
|
|
.probe = ast2600_sdrammc_probe,
|
|
.priv_auto = sizeof(struct dram_info),
|
|
};
|