mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-15 09:27:35 +00:00
49df685d32
This commit adds OMAP3 BeagleBoard devicetree files from Linux v5.16.0. This commit fixes CONFIG_DM_MMC warning. v3: patch clean-up Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
349 lines
7.7 KiB
Text
349 lines
7.7 KiB
Text
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Author: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
|
|
*/
|
|
/dts-v1/;
|
|
|
|
#include "omap34xx.dtsi"
|
|
/ {
|
|
model = "TimLL OMAP3 Devkit8000";
|
|
compatible = "timll,omap3-devkit8000", "ti,omap3430", "ti,omap3";
|
|
|
|
aliases {
|
|
display1 = &dvi0;
|
|
display2 = &tv0;
|
|
};
|
|
|
|
memory@80000000 {
|
|
device_type = "memory";
|
|
reg = <0x80000000 0x10000000>; /* 256 MB */
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
heartbeat {
|
|
label = "devkit8000::led1";
|
|
gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>; /* 186 -> LED1 */
|
|
default-state = "on";
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
|
|
mmc {
|
|
label = "devkit8000::led2";
|
|
gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 -> LED2 */
|
|
default-state = "on";
|
|
linux,default-trigger = "none";
|
|
};
|
|
|
|
usr {
|
|
label = "devkit8000::led3";
|
|
gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* 164 -> LED3 */
|
|
default-state = "on";
|
|
linux,default-trigger = "usr";
|
|
};
|
|
|
|
pmu_stat {
|
|
label = "devkit8000::pmu_stat";
|
|
gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
|
|
};
|
|
};
|
|
|
|
sound {
|
|
compatible = "ti,omap-twl4030";
|
|
ti,model = "devkit8000";
|
|
|
|
ti,mcbsp = <&mcbsp2>;
|
|
ti,audio-routing =
|
|
"Ext Spk", "PREDRIVEL",
|
|
"Ext Spk", "PREDRIVER",
|
|
"MAINMIC", "Main Mic",
|
|
"Main Mic", "Mic Bias 1";
|
|
};
|
|
|
|
tfp410: encoder0 {
|
|
compatible = "ti,tfp410";
|
|
powerdown-gpios = <&twl_gpio 7 GPIO_ACTIVE_LOW>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
tfp410_in: endpoint {
|
|
remote-endpoint = <&dpi_dvi_out>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
tfp410_out: endpoint {
|
|
remote-endpoint = <&dvi_connector_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
dvi0: connector0 {
|
|
compatible = "dvi-connector";
|
|
label = "dvi";
|
|
|
|
digital;
|
|
|
|
ddc-i2c-bus = <&i2c2>;
|
|
|
|
port {
|
|
dvi_connector_in: endpoint {
|
|
remote-endpoint = <&tfp410_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
tv0: connector1 {
|
|
compatible = "svideo-connector";
|
|
label = "tv";
|
|
|
|
port {
|
|
tv_connector_in: endpoint {
|
|
remote-endpoint = <&venc_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
clock-frequency = <2600000>;
|
|
|
|
twl: twl@48 {
|
|
reg = <0x48>;
|
|
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
|
|
|
|
twl_audio: audio {
|
|
compatible = "ti,twl4030-audio";
|
|
codec {
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
clock-frequency = <400000>;
|
|
};
|
|
|
|
&i2c3 {
|
|
status = "disabled";
|
|
};
|
|
|
|
#include "twl4030.dtsi"
|
|
#include "twl4030_omap3.dtsi"
|
|
|
|
&mmc1 {
|
|
vmmc-supply = <&vmmc1>;
|
|
vqmmc-supply = <&vsim>;
|
|
bus-width = <8>;
|
|
};
|
|
|
|
&mmc2 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&mmc3 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&twl_gpio {
|
|
ti,use-leds;
|
|
/*
|
|
* pulldowns:
|
|
* BIT(1), BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
|
|
* BIT(15), BIT(16), BIT(17)
|
|
*/
|
|
ti,pulldowns = <0x03a1c6>;
|
|
};
|
|
|
|
&wdt2 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&mcbsp2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpmc {
|
|
ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */
|
|
6 0 0x2c000000 0x1000000>; /* CS6: 16MB for DM9000 */
|
|
|
|
nand@0,0 {
|
|
compatible = "ti,omap2-nand";
|
|
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
|
|
interrupt-parent = <&gpmc>;
|
|
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
|
|
<1 IRQ_TYPE_NONE>; /* termcount */
|
|
nand-bus-width = <16>;
|
|
gpmc,device-width = <2>;
|
|
ti,nand-ecc-opt = "sw";
|
|
|
|
gpmc,sync-clk-ps = <0>;
|
|
gpmc,cs-on-ns = <0>;
|
|
gpmc,cs-rd-off-ns = <44>;
|
|
gpmc,cs-wr-off-ns = <44>;
|
|
gpmc,adv-on-ns = <6>;
|
|
gpmc,adv-rd-off-ns = <34>;
|
|
gpmc,adv-wr-off-ns = <44>;
|
|
gpmc,we-off-ns = <40>;
|
|
gpmc,oe-off-ns = <54>;
|
|
gpmc,access-ns = <64>;
|
|
gpmc,rd-cycle-ns = <82>;
|
|
gpmc,wr-cycle-ns = <82>;
|
|
gpmc,wr-access-ns = <40>;
|
|
gpmc,wr-data-mux-bus-ns = <0>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
x-loader@0 {
|
|
label = "X-Loader";
|
|
reg = <0 0x80000>;
|
|
};
|
|
|
|
bootloaders@80000 {
|
|
label = "U-Boot";
|
|
reg = <0x80000 0x1e0000>;
|
|
};
|
|
|
|
bootloaders_env@260000 {
|
|
label = "U-Boot Env";
|
|
reg = <0x260000 0x20000>;
|
|
};
|
|
|
|
kernel@280000 {
|
|
label = "Kernel";
|
|
reg = <0x280000 0x400000>;
|
|
};
|
|
|
|
filesystem@680000 {
|
|
label = "File System";
|
|
reg = <0x680000 0xf980000>;
|
|
};
|
|
};
|
|
|
|
ethernet@6,0 {
|
|
compatible = "davicom,dm9000";
|
|
reg = <6 0x000 2
|
|
6 0x400 2>; /* CS6, offset 0 and 0x400, IO size 2 */
|
|
bank-width = <2>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
|
|
davicom,no-eeprom;
|
|
|
|
gpmc,mux-add-data = <0>;
|
|
gpmc,device-width = <1>;
|
|
gpmc,wait-pin = <0>;
|
|
gpmc,cycle2cycle-samecsen;
|
|
gpmc,cycle2cycle-diffcsen;
|
|
|
|
gpmc,cs-on-ns = <6>;
|
|
gpmc,cs-rd-off-ns = <180>;
|
|
gpmc,cs-wr-off-ns = <180>;
|
|
gpmc,adv-on-ns = <0>;
|
|
gpmc,adv-rd-off-ns = <18>;
|
|
gpmc,adv-wr-off-ns = <48>;
|
|
gpmc,oe-on-ns = <54>;
|
|
gpmc,oe-off-ns = <168>;
|
|
gpmc,we-on-ns = <54>;
|
|
gpmc,we-off-ns = <168>;
|
|
gpmc,rd-cycle-ns = <186>;
|
|
gpmc,wr-cycle-ns = <186>;
|
|
gpmc,access-ns = <144>;
|
|
gpmc,page-burst-access-ns = <24>;
|
|
gpmc,bus-turnaround-ns = <90>;
|
|
gpmc,cycle2cycle-delay-ns = <90>;
|
|
gpmc,wait-monitoring-ns = <0>;
|
|
gpmc,clk-activation-ns = <0>;
|
|
gpmc,wr-data-mux-bus-ns = <0>;
|
|
gpmc,wr-access-ns = <0>;
|
|
};
|
|
};
|
|
|
|
&omap3_pmx_core {
|
|
dss_dpi_pins: pinmux_dss_dpi_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
|
|
OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
|
|
OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
|
|
OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
|
|
OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
|
|
OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
|
|
OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
|
|
OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
|
|
OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
|
|
OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
|
|
OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
|
|
OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
|
|
OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
|
|
OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
|
|
OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
|
|
OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
|
|
OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
|
|
OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
|
|
OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
|
|
OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
|
|
OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
|
|
OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
|
|
OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
|
|
OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
|
|
OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
|
|
OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
|
|
OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
|
|
OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&vpll1 {
|
|
/* Needed for DSS */
|
|
regulator-name = "vdds_dsi";
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
&dss {
|
|
status = "okay";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&dss_dpi_pins>;
|
|
|
|
vdds_dsi-supply = <&vpll1>;
|
|
vdda_dac-supply = <&vdac>;
|
|
|
|
port {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
dpi_dvi_out: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&tfp410_in>;
|
|
data-lines = <24>;
|
|
};
|
|
|
|
endpoint@1 {
|
|
reg = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&venc {
|
|
status = "okay";
|
|
|
|
vdda-supply = <&vdac>;
|
|
|
|
port {
|
|
venc_out: endpoint {
|
|
remote-endpoint = <&tv_connector_in>;
|
|
ti,channels = <2>;
|
|
};
|
|
};
|
|
};
|