mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 08:57:58 +00:00
953ab736af
Previous uDoo configuration adopts register settings for DDR3, clock, muxing, etc. taken from Nitrogen6x. uDoo schematics is rather different from that board, and it needs customized setting for most of the registers. All this changes can be considered atomical since it is part of initial support of the board. Patch changes uDoo configuration files path to a specific one, and adopt optimized value for every configured register. Signed-off-by: Giuseppe Pagano <giuseppe.pagano@seco.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> CC: Stefano Babic <sbabic@denx.de> CC: Fabio Estevam <fabio.estevam@freescale.com>
87 lines
2.8 KiB
INI
87 lines
2.8 KiB
INI
/*
|
|
* Copyright (C) 2013 Boundary Devices
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*
|
|
* Device Configuration Data (DCD)
|
|
*
|
|
* Each entry must have the format:
|
|
* Addr-type Address Value
|
|
*
|
|
* where:
|
|
* Addr-type register length (1,2 or 4 bytes)
|
|
* Address absolute address of the register
|
|
* value value to be stored in the register
|
|
*/
|
|
|
|
/*
|
|
* DDR3 settings
|
|
* MX6Q ddr is limited to 1066 Mhz currently 1056 MHz(528 MHz clock),
|
|
* memory bus width: 64 bits x16/x32/x64
|
|
* MX6DL ddr is limited to 800 MHz(400 MHz clock)
|
|
* memory bus width: 64 bits x16/x32/x64
|
|
* MX6SOLO ddr is limited to 800 MHz(400 MHz clock)
|
|
* memory bus width: 32 bits x16/x32
|
|
*/
|
|
DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000030
|
|
DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000030
|
|
DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000030
|
|
DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000030
|
|
DATA 4, MX6_IOM_DRAM_SDQS4, 0x00000030
|
|
DATA 4, MX6_IOM_DRAM_SDQS5, 0x00000030
|
|
DATA 4, MX6_IOM_DRAM_SDQS6, 0x00000030
|
|
DATA 4, MX6_IOM_DRAM_SDQS7, 0x00000030
|
|
|
|
DATA 4, MX6_IOM_GRP_B0DS, 0x00000030
|
|
DATA 4, MX6_IOM_GRP_B1DS, 0x00000030
|
|
DATA 4, MX6_IOM_GRP_B2DS, 0x00000030
|
|
DATA 4, MX6_IOM_GRP_B3DS, 0x00000030
|
|
DATA 4, MX6_IOM_GRP_B4DS, 0x00000030
|
|
DATA 4, MX6_IOM_GRP_B5DS, 0x00000030
|
|
DATA 4, MX6_IOM_GRP_B6DS, 0x00000030
|
|
DATA 4, MX6_IOM_GRP_B7DS, 0x00000030
|
|
DATA 4, MX6_IOM_GRP_ADDDS, 0x00000030
|
|
/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
|
|
DATA 4, MX6_IOM_GRP_CTLDS, 0x00000030
|
|
|
|
DATA 4, MX6_IOM_DRAM_DQM0, 0x00020030
|
|
DATA 4, MX6_IOM_DRAM_DQM1, 0x00020030
|
|
DATA 4, MX6_IOM_DRAM_DQM2, 0x00020030
|
|
DATA 4, MX6_IOM_DRAM_DQM3, 0x00020030
|
|
DATA 4, MX6_IOM_DRAM_DQM4, 0x00020030
|
|
DATA 4, MX6_IOM_DRAM_DQM5, 0x00020030
|
|
DATA 4, MX6_IOM_DRAM_DQM6, 0x00020030
|
|
DATA 4, MX6_IOM_DRAM_DQM7, 0x00020030
|
|
|
|
DATA 4, MX6_IOM_DRAM_CAS, 0x00020030
|
|
DATA 4, MX6_IOM_DRAM_RAS, 0x00020030
|
|
DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00020030
|
|
DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00020030
|
|
|
|
DATA 4, MX6_IOM_DRAM_RESET, 0x00020030
|
|
DATA 4, MX6_IOM_DRAM_SDCKE0, 0x00003000
|
|
DATA 4, MX6_IOM_DRAM_SDCKE1, 0x00003000
|
|
|
|
DATA 4, MX6_IOM_DRAM_SDODT0, 0x00003030
|
|
DATA 4, MX6_IOM_DRAM_SDODT1, 0x00003030
|
|
|
|
/* (differential input) */
|
|
DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000
|
|
/* (differential input) */
|
|
DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000
|
|
/* disable ddr pullups */
|
|
DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000
|
|
DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000
|
|
/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
|
|
DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000C0000
|
|
|
|
/* Read data DQ Byte0-3 delay */
|
|
DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333
|
|
DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333
|
|
DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333
|
|
DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333
|
|
DATA 4, MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333
|
|
DATA 4, MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333
|
|
DATA 4, MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333
|
|
DATA 4, MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333
|
|
|