u-boot/arch/arm/dts/uniphier-sld3.dtsi
Masahiro Yamada abb6ac25da ARM: dts: uniphier: sync DT with Linux
Fix the following DTC warnings:
Warning (simple_bus_reg): Node /soc/system-bus@58c00000/support_card@1,1f00000/ethernet@00000000 simple-bus unit address format error, expected "0"
Warning (simple_bus_reg): Node /soc/system-bus@58c00000/support_card@1,1f00000/uart@000b0000 simple-bus unit address format error, expected "b0000"
Warning (simple_bus_reg): Node /soc/smpctrl@59800000 simple-bus unit address format error, expected "59801000"

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-05-17 21:51:04 +09:00

494 lines
12 KiB
Text

/*
* Device Tree Source for UniPhier sLD3 SoC
*
* Copyright (C) 2015-2016 Socionext Inc.
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/ {
compatible = "socionext,uniphier-sld3";
#address-cells = <1>;
#size-cells = <1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
enable-method = "psci";
next-level-cache = <&l2>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
enable-method = "psci";
next-level-cache = <&l2>;
};
};
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
clocks {
refclk: ref {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24576000>;
};
arm_timer_clk: arm_timer_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <50000000>;
};
};
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
interrupt-parent = <&intc>;
u-boot,dm-pre-reloc;
timer@20000200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x20000200 0x20>;
interrupts = <1 11 0x304>;
clocks = <&arm_timer_clk>;
};
timer@20000600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x20000600 0x20>;
interrupts = <1 13 0x304>;
clocks = <&arm_timer_clk>;
};
intc: interrupt-controller@20001000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x20001000 0x1000>,
<0x20000100 0x100>;
};
l2: l2-cache@500c0000 {
compatible = "socionext,uniphier-system-cache";
reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
<0x506c0000 0x400>;
interrupts = <0 174 4>, <0 175 4>;
cache-unified;
cache-size = <(512 * 1024)>;
cache-sets = <256>;
cache-line-size = <128>;
cache-level = <2>;
};
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006800 0x40>;
interrupts = <0 33 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&sys_clk 0>;
clock-frequency = <36864000>;
};
serial1: serial@54006900 {
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006900 0x40>;
interrupts = <0 35 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&sys_clk 0>;
clock-frequency = <36864000>;
};
serial2: serial@54006a00 {
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006a00 0x40>;
interrupts = <0 37 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&sys_clk 0>;
clock-frequency = <36864000>;
};
port0x: gpio@55000008 {
compatible = "socionext,uniphier-gpio";
reg = <0x55000008 0x8>;
gpio-controller;
#gpio-cells = <2>;
};
port1x: gpio@55000010 {
compatible = "socionext,uniphier-gpio";
reg = <0x55000010 0x8>;
gpio-controller;
#gpio-cells = <2>;
};
port2x: gpio@55000018 {
compatible = "socionext,uniphier-gpio";
reg = <0x55000018 0x8>;
gpio-controller;
#gpio-cells = <2>;
};
port3x: gpio@55000020 {
compatible = "socionext,uniphier-gpio";
reg = <0x55000020 0x8>;
gpio-controller;
#gpio-cells = <2>;
};
port4: gpio@55000028 {
compatible = "socionext,uniphier-gpio";
reg = <0x55000028 0x8>;
gpio-controller;
#gpio-cells = <2>;
};
port5x: gpio@55000030 {
compatible = "socionext,uniphier-gpio";
reg = <0x55000030 0x8>;
gpio-controller;
#gpio-cells = <2>;
};
port6x: gpio@55000038 {
compatible = "socionext,uniphier-gpio";
reg = <0x55000038 0x8>;
gpio-controller;
#gpio-cells = <2>;
};
port7x: gpio@55000040 {
compatible = "socionext,uniphier-gpio";
reg = <0x55000040 0x8>;
gpio-controller;
#gpio-cells = <2>;
};
port8x: gpio@55000048 {
compatible = "socionext,uniphier-gpio";
reg = <0x55000048 0x8>;
gpio-controller;
#gpio-cells = <2>;
};
port9x: gpio@55000050 {
compatible = "socionext,uniphier-gpio";
reg = <0x55000050 0x8>;
gpio-controller;
#gpio-cells = <2>;
};
port10x: gpio@55000058 {
compatible = "socionext,uniphier-gpio";
reg = <0x55000058 0x8>;
gpio-controller;
#gpio-cells = <2>;
};
port11x: gpio@55000060 {
compatible = "socionext,uniphier-gpio";
reg = <0x55000060 0x8>;
gpio-controller;
#gpio-cells = <2>;
};
port12x: gpio@55000068 {
compatible = "socionext,uniphier-gpio";
reg = <0x55000068 0x8>;
gpio-controller;
#gpio-cells = <2>;
};
port13x: gpio@55000070 {
compatible = "socionext,uniphier-gpio";
reg = <0x55000070 0x8>;
gpio-controller;
#gpio-cells = <2>;
};
port14x: gpio@55000078 {
compatible = "socionext,uniphier-gpio";
reg = <0x55000078 0x8>;
gpio-controller;
#gpio-cells = <2>;
};
port16x: gpio@55000088 {
compatible = "socionext,uniphier-gpio";
reg = <0x55000088 0x8>;
gpio-controller;
#gpio-cells = <2>;
};
i2c0: i2c@58400000 {
compatible = "socionext,uniphier-i2c";
status = "disabled";
reg = <0x58400000 0x40>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 41 1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
clocks = <&sys_clk 1>;
clock-frequency = <100000>;
};
i2c1: i2c@58480000 {
compatible = "socionext,uniphier-i2c";
status = "disabled";
reg = <0x58480000 0x40>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 42 1>;
clocks = <&sys_clk 1>;
clock-frequency = <100000>;
};
i2c2: i2c@58500000 {
compatible = "socionext,uniphier-i2c";
status = "disabled";
reg = <0x58500000 0x40>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 43 1>;
clocks = <&sys_clk 1>;
clock-frequency = <100000>;
};
i2c3: i2c@58580000 {
compatible = "socionext,uniphier-i2c";
status = "disabled";
reg = <0x58580000 0x40>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 44 1>;
clocks = <&sys_clk 1>;
clock-frequency = <100000>;
};
/* chip-internal connection for DMD */
i2c4: i2c@58600000 {
compatible = "socionext,uniphier-i2c";
reg = <0x58600000 0x40>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 45 1>;
clocks = <&sys_clk 1>;
clock-frequency = <400000>;
};
system_bus: system-bus@58c00000 {
compatible = "socionext,uniphier-system-bus";
status = "disabled";
reg = <0x58c00000 0x400>;
#address-cells = <2>;
#size-cells = <1>;
};
smpctrl@59801000 {
compatible = "socionext,uniphier-smpctrl";
reg = <0x59801000 0x400>;
};
mioctrl@59810000 {
compatible = "socionext,uniphier-sld3-mioctrl",
"simple-mfd", "syscon";
reg = <0x59810000 0x800>;
u-boot,dm-pre-reloc;
mio_clk: clock {
compatible = "socionext,uniphier-sld3-mio-clock";
#clock-cells = <1>;
u-boot,dm-pre-reloc;
};
mio_rst: reset {
compatible = "socionext,uniphier-sld3-mio-reset";
#reset-cells = <1>;
};
};
emmc: sdhc@5a400000 {
compatible = "socionext,uniphier-sdhc";
status = "disabled";
reg = <0x5a400000 0x200>;
interrupts = <0 78 4>;
pinctrl-names = "default", "1.8v";
pinctrl-0 = <&pinctrl_emmc>;
pinctrl-1 = <&pinctrl_emmc_1v8>;
clocks = <&mio_clk 1>;
reset-names = "host", "bridge";
resets = <&mio_rst 1>, <&mio_rst 4>;
bus-width = <8>;
non-removable;
cap-mmc-highspeed;
cap-mmc-hw-reset;
};
sd: sdhc@5a500000 {
compatible = "socionext,uniphier-sdhc";
status = "disabled";
reg = <0x5a500000 0x200>;
interrupts = <0 76 4>;
pinctrl-names = "default", "1.8v";
pinctrl-0 = <&pinctrl_sd>;
pinctrl-1 = <&pinctrl_sd_1v8>;
clocks = <&mio_clk 0>;
reset-names = "host", "bridge";
resets = <&mio_rst 0>, <&mio_rst 3>;
bus-width = <4>;
cap-sd-highspeed;
sd-uhs-sdr12;
sd-uhs-sdr25;
sd-uhs-sdr50;
};
usb0: usb@5a800100 {
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
reg = <0x5a800100 0x100>;
interrupts = <0 80 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0>;
clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
<&mio_rst 12>;
};
usb1: usb@5a810100 {
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
reg = <0x5a810100 0x100>;
interrupts = <0 81 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>;
clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
<&mio_rst 13>;
};
usb2: usb@5a820100 {
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
reg = <0x5a820100 0x100>;
interrupts = <0 82 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb2>;
clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
<&mio_rst 14>;
};
usb3: usb@5a830100 {
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
reg = <0x5a830100 0x100>;
interrupts = <0 83 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb3>;
clocks = <&mio_clk 7>, <&mio_clk 11>, <&mio_clk 15>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 11>,
<&mio_rst 15>;
};
soc-glue@5f800000 {
compatible = "socionext,uniphier-sld3-soc-glue",
"simple-mfd", "syscon";
reg = <0x5f800000 0x2000>;
u-boot,dm-pre-reloc;
pinctrl: pinctrl {
compatible = "socionext,uniphier-sld3-pinctrl";
u-boot,dm-pre-reloc;
};
};
aidet@f1830000 {
compatible = "simple-mfd", "syscon";
reg = <0xf1830000 0x200>;
};
sysctrl@f1840000 {
compatible = "socionext,uniphier-sld3-sysctrl",
"simple-mfd", "syscon";
reg = <0xf1840000 0x10000>;
sys_clk: clock {
compatible = "socionext,uniphier-sld3-clock";
#clock-cells = <1>;
};
sys_rst: reset {
compatible = "socionext,uniphier-sld3-reset";
#reset-cells = <1>;
};
};
nand: nand@f8000000 {
compatible = "socionext,uniphier-denali-nand-v5a";
status = "disabled";
reg-names = "nand_data", "denali_reg";
reg = <0xf8000000 0x20>, <0xf8100000 0x1000>;
interrupts = <0 65 4>;
clocks = <&sys_clk 2>;
nand-ecc-strength = <8>;
};
};
};
/include/ "uniphier-pinctrl.dtsi"