mirror of
https://github.com/AsahiLinux/u-boot
synced 2025-03-03 23:07:12 +00:00
ec8528c22f
Recently, the U-Boot installation process has changed significantly. This should be depicted in documentation. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
125 lines
3.9 KiB
ReStructuredText
125 lines
3.9 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0+
|
||
|
||
U-Boot for the HTC One X (endeavoru)
|
||
====================================
|
||
|
||
``DISCLAMER!`` Moving your HTC ONe X to use U-Boot assumes replacement of the
|
||
vendor hboot. Vendor android firmwares will no longer be able to run on the
|
||
device. This replacement IS reversible.
|
||
|
||
Quick Start
|
||
-----------
|
||
|
||
- Build U-Boot
|
||
- Process U-Boot
|
||
- Flashing U-Boot into the eMMC
|
||
- Boot
|
||
- Self Upgrading
|
||
|
||
Build U-Boot
|
||
------------
|
||
|
||
.. code-block:: bash
|
||
|
||
$ export CROSS_COMPILE=arm-linux-gnueabi-
|
||
$ make endeavoru_defconfig
|
||
$ make
|
||
|
||
After the build succeeds, you will obtain the final ``u-boot-dtb-tegra.bin``
|
||
image, ready for further processing.
|
||
|
||
Process U-Boot
|
||
--------------
|
||
|
||
``DISCLAMER!`` All questions related to the re-crypt work should be asked
|
||
in re-crypt repo issues. NOT HERE!
|
||
|
||
re-crypt is a tool that processes the ``u-boot-dtb-tegra.bin`` binary into form
|
||
usable by device. This process is required only on the first installation or
|
||
to recover the device in case of a failed update.
|
||
|
||
Permanent installation can be performed either by using the nv3p protocol or by
|
||
pre-loading just built U-Boot into RAM.
|
||
|
||
Processing for the NV3P protocol
|
||
********************************
|
||
|
||
.. code-block:: bash
|
||
|
||
$ git clone https://gitlab.com/grate-driver/re-crypt.git
|
||
$ cd re-crypt # place your u-boot-dtb-tegra.bin here
|
||
$ ./re-crypt.py --dev endeavoru
|
||
|
||
The script will produce a ``repart-block.bin`` ready to flash.
|
||
|
||
Processing for pre-loaded U-Boot
|
||
********************************
|
||
|
||
The procedure is the same, but the ``--split`` argument is used with the
|
||
``re-crypt.py``. The script will produce ``bct.img`` and ``ebt.img`` ready
|
||
to flash.
|
||
|
||
Flashing U-Boot into the eMMC
|
||
-----------------------------
|
||
|
||
``DISCLAMER!`` All questions related to NvFlash should be asked in the proper
|
||
place. NOT HERE! Flashing U-Boot will erase all eMMC, so make a backup before!
|
||
|
||
Permanent installation can be performed either by using the nv3p protocol or by
|
||
pre-loading just built U-Boot into RAM.
|
||
|
||
Flashing with the NV3P protocol
|
||
*******************************
|
||
|
||
Nv3p is a custom Nvidia protocol used to recover bricked devices. Devices can
|
||
enter it either by using ``wheelie`` with the correct ``blob.bin`` file or by
|
||
pre-loading vendor bootloader with the Fusée Gelée.
|
||
|
||
With nv3p, ``repart-block.bin`` is used. It contains BCT and a bootloader in
|
||
encrypted state in form, which can just be written RAW at the start of eMMC.
|
||
|
||
.. code-block:: bash
|
||
|
||
$ wheelie --blob blob.bin
|
||
$ nvflash --resume --rawdevicewrite 0 1024 repart-block.bin
|
||
|
||
When flashing is done, reboot the device.
|
||
|
||
Flashing with a pre-loaded U-Boot
|
||
*********************************
|
||
|
||
U-Boot pre-loaded into RAM acts the same as when it was booted "cold". Currently
|
||
U-Boot supports bootmenu entry fastboot, which allows to write a processed copy
|
||
of U-Boot permanently into eMMC.
|
||
|
||
While pre-loading U-Boot, hold the ``volume down`` button which will trigger
|
||
the bootmenu. There, select ``fastboot`` using the volume and power buttons.
|
||
After, on host PC, do:
|
||
|
||
.. code-block:: bash
|
||
|
||
$ fastboot flash 0.1 bct.img
|
||
$ fastboot flash 0.2 ebt.img
|
||
$ fastboot reboot
|
||
|
||
Device will reboot.
|
||
|
||
Boot
|
||
----
|
||
|
||
To boot Linux, U-Boot will look for an ``extlinux.conf`` on eMMC. Additionally,
|
||
if the Volume Down button is pressed while booting, the device will enter
|
||
bootmenu. Bootmenu contains entries to mount eMMC as mass storage, fastboot,
|
||
reboot, reboot RCM, poweroff, enter U-Boot console and update bootloader (check
|
||
the next chapter).
|
||
|
||
Flashing ``repart-block.bin`` eliminates vendor restrictions on eMMC and allows
|
||
the user to use/partition it in any way the user desires.
|
||
|
||
Self Upgrading
|
||
--------------
|
||
|
||
Place your ``u-boot-dtb-tegra.bin`` on the first partition of the eMMC (using
|
||
ability of u-boot to mount it). Enter bootmenu, choose update bootloader option
|
||
with Power button and U-Boot should update itself. Once the process is
|
||
completed, U-Boot will ask to press any button to reboot.
|