mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-15 09:27:35 +00:00
04bb5e95be
Apply commit 534f0fbd65 ("arm64: Fix relocation of env_addr if
POSITION_INDEPENDENT=y") also for 32-bit ARM.
This change fixes crashing of U-Boot on ARMv7 (Omap3 / Cortex-A8) Nokia N900
phone (real HW). Note that qemu emulator of this board with same u-boot.bin
binary has not triggered this crash.
Crash happened after U-Boot printed following debug lines to serial console:
initcall: 0001ea8c (relocated to 8fe0aa8c)
Loading Environment from <NULL>... Using default environment
Destroy Hash Table: 8fe25a98 table = 00000000
Create Hash Table: N=387
Signed-off-by: Pali Rohár <pali@kernel.org>
208 lines
5.9 KiB
ArmAsm
208 lines
5.9 KiB
ArmAsm
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* crt0 - C-runtime startup Code for ARM U-Boot
|
|
*
|
|
* Copyright (c) 2012 Albert ARIBAUD <albert.u.boot@aribaud.net>
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <asm-offsets.h>
|
|
#include <linux/linkage.h>
|
|
#include <asm/assembler.h>
|
|
#include <system-constants.h>
|
|
|
|
/*
|
|
* This file handles the target-independent stages of the U-Boot
|
|
* start-up where a C runtime environment is needed. Its entry point
|
|
* is _main and is branched into from the target's start.S file.
|
|
*
|
|
* _main execution sequence is:
|
|
*
|
|
* 1. Set up initial environment for calling board_init_f().
|
|
* This environment only provides a stack and a place to store
|
|
* the GD ('global data') structure, both located in some readily
|
|
* available RAM (SRAM, locked cache...). In this context, VARIABLE
|
|
* global data, initialized or not (BSS), are UNAVAILABLE; only
|
|
* CONSTANT initialized data are available. GD should be zeroed
|
|
* before board_init_f() is called.
|
|
*
|
|
* 2. Call board_init_f(). This function prepares the hardware for
|
|
* execution from system RAM (DRAM, DDR...) As system RAM may not
|
|
* be available yet, , board_init_f() must use the current GD to
|
|
* store any data which must be passed on to later stages. These
|
|
* data include the relocation destination, the future stack, and
|
|
* the future GD location.
|
|
*
|
|
* 3. Set up intermediate environment where the stack and GD are the
|
|
* ones allocated by board_init_f() in system RAM, but BSS and
|
|
* initialized non-const data are still not available.
|
|
*
|
|
* 4a.For U-Boot proper (not SPL), call relocate_code(). This function
|
|
* relocates U-Boot from its current location into the relocation
|
|
* destination computed by board_init_f().
|
|
*
|
|
* 4b.For SPL, board_init_f() just returns (to crt0). There is no
|
|
* code relocation in SPL.
|
|
*
|
|
* 5. Set up final environment for calling board_init_r(). This
|
|
* environment has BSS (initialized to 0), initialized non-const
|
|
* data (initialized to their intended value), and stack in system
|
|
* RAM (for SPL moving the stack and GD into RAM is optional - see
|
|
* CONFIG_SPL_STACK_R). GD has retained values set by board_init_f().
|
|
*
|
|
* 6. For U-Boot proper (not SPL), some CPUs have some work left to do
|
|
* at this point regarding memory, so call c_runtime_cpu_setup.
|
|
*
|
|
* 7. Branch to board_init_r().
|
|
*
|
|
* For more information see 'Board Initialisation Flow in README.
|
|
*/
|
|
|
|
/*
|
|
* Macro for clearing BSS during SPL execution. Usually called during the
|
|
* relocation process for most boards before entering board_init_r(), but
|
|
* can also be done early before entering board_init_f() on plaforms that
|
|
* can afford it due to sufficient memory being available early.
|
|
*/
|
|
|
|
.macro CLEAR_BSS
|
|
ldr r0, =__bss_start /* this is auto-relocated! */
|
|
|
|
#ifdef CONFIG_USE_ARCH_MEMSET
|
|
ldr r3, =__bss_end /* this is auto-relocated! */
|
|
mov r1, #0x00000000 /* prepare zero to clear BSS */
|
|
|
|
subs r2, r3, r0 /* r2 = memset len */
|
|
bl memset
|
|
#else
|
|
ldr r1, =__bss_end /* this is auto-relocated! */
|
|
mov r2, #0x00000000 /* prepare zero to clear BSS */
|
|
|
|
clbss_l:cmp r0, r1 /* while not at end of BSS */
|
|
strlo r2, [r0] /* clear 32-bit BSS word */
|
|
addlo r0, r0, #4 /* move to next */
|
|
blo clbss_l
|
|
#endif
|
|
.endm
|
|
|
|
/*
|
|
* entry point of crt0 sequence
|
|
*/
|
|
|
|
ENTRY(_main)
|
|
|
|
/* Call arch_very_early_init before initializing C runtime environment. */
|
|
#if CONFIG_IS_ENABLED(ARCH_VERY_EARLY_INIT)
|
|
bl arch_very_early_init
|
|
#endif
|
|
|
|
/*
|
|
* Set up initial C runtime environment and call board_init_f(0).
|
|
*/
|
|
|
|
#if defined(CONFIG_TPL_BUILD) && defined(CONFIG_TPL_NEEDS_SEPARATE_STACK)
|
|
ldr r0, =(CONFIG_TPL_STACK)
|
|
#elif defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK)
|
|
ldr r0, =(CONFIG_SPL_STACK)
|
|
#else
|
|
ldr r0, =(SYS_INIT_SP_ADDR)
|
|
#endif
|
|
bic r0, r0, #7 /* 8-byte alignment for ABI compliance */
|
|
mov sp, r0
|
|
bl board_init_f_alloc_reserve
|
|
mov sp, r0
|
|
/* set up gd here, outside any C code */
|
|
mov r9, r0
|
|
bl board_init_f_init_reserve
|
|
|
|
#if defined(CONFIG_DEBUG_UART) && CONFIG_IS_ENABLED(SERIAL)
|
|
bl debug_uart_init
|
|
#endif
|
|
|
|
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_EARLY_BSS)
|
|
CLEAR_BSS
|
|
#endif
|
|
|
|
mov r0, #0
|
|
bl board_init_f
|
|
|
|
#if ! defined(CONFIG_SPL_BUILD)
|
|
|
|
/*
|
|
* Set up intermediate environment (new sp and gd) and call
|
|
* relocate_code(addr_moni). Trick here is that we'll return
|
|
* 'here' but relocated.
|
|
*/
|
|
|
|
ldr r0, [r9, #GD_START_ADDR_SP] /* sp = gd->start_addr_sp */
|
|
bic r0, r0, #7 /* 8-byte alignment for ABI compliance */
|
|
mov sp, r0
|
|
ldr r9, [r9, #GD_NEW_GD] /* r9 <- gd->new_gd */
|
|
|
|
adr lr, here
|
|
#if defined(CONFIG_POSITION_INDEPENDENT)
|
|
adr r0, _main
|
|
ldr r1, _start_ofs
|
|
add r0, r1
|
|
ldr r1, =CONFIG_TEXT_BASE
|
|
sub r1, r0
|
|
add lr, r1
|
|
#if defined(CONFIG_SYS_RELOC_GD_ENV_ADDR)
|
|
ldr r0, [r9, #GD_ENV_ADDR] /* r0 = gd->env_addr */
|
|
add r0, r0, r1
|
|
str r0, [r9, #GD_ENV_ADDR]
|
|
#endif
|
|
#endif
|
|
ldr r0, [r9, #GD_RELOC_OFF] /* r0 = gd->reloc_off */
|
|
add lr, lr, r0
|
|
#if defined(CONFIG_CPU_V7M)
|
|
orr lr, #1 /* As required by Thumb-only */
|
|
#endif
|
|
ldr r0, [r9, #GD_RELOCADDR] /* r0 = gd->relocaddr */
|
|
b relocate_code
|
|
here:
|
|
/*
|
|
* now relocate vectors
|
|
*/
|
|
|
|
bl relocate_vectors
|
|
|
|
/* Set up final (full) environment */
|
|
|
|
bl c_runtime_cpu_setup /* we still call old routine here */
|
|
#endif
|
|
#if !defined(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(FRAMEWORK)
|
|
|
|
#if !defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL_EARLY_BSS)
|
|
CLEAR_BSS
|
|
#endif
|
|
|
|
# ifdef CONFIG_SPL_BUILD
|
|
/* Use a DRAM stack for the rest of SPL, if requested */
|
|
bl spl_relocate_stack_gd
|
|
cmp r0, #0
|
|
movne sp, r0
|
|
movne r9, r0
|
|
# endif
|
|
|
|
#if ! defined(CONFIG_SPL_BUILD)
|
|
bl coloured_LED_init
|
|
bl red_led_on
|
|
#endif
|
|
/* call board_init_r(gd_t *id, ulong dest_addr) */
|
|
mov r0, r9 /* gd_t */
|
|
ldr r1, [r9, #GD_RELOCADDR] /* dest_addr */
|
|
/* call board_init_r */
|
|
#if CONFIG_IS_ENABLED(SYS_THUMB_BUILD)
|
|
ldr lr, =board_init_r /* this is auto-relocated! */
|
|
bx lr
|
|
#else
|
|
ldr pc, =board_init_r /* this is auto-relocated! */
|
|
#endif
|
|
/* we should not return here. */
|
|
#endif
|
|
|
|
ENDPROC(_main)
|
|
|
|
_start_ofs:
|
|
.word _start - _main
|