u-boot/include/dt-bindings/pinctrl/am33xx.h
Christian Amann 73e4ba9868 ARM: dts: am33xx: fix SLEWCTRL_FAST pinctrl binding
Copy missing Kernel patch to make SLEWCTRL_SLOW available in device tree
and to correct the value of SLEWCTRL_FAST.
After this patch, the Kernel and U-boot device tree settings for
SLEWCTRL have the same effect.

Original Kernel patch message:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=424e0f039bfa8a51fb5c5178b6ece8baa4996469

"
According to AM335x TRM, Document spruh73l, Revised February 2015,
Section 9.2.2 Pad Control Registers, setting bit 6 of the pad control
registers actually sets the SLEWCTRL value to slow rather than fast as
the current macro indicates. Introduce a new macro, SLEWCTRL_SLOW, that
sets the bit, and modify SLEWCTRL_FAST to 0 but keep it for
completeness. Current users of the macro (i2c and mdio) are left
unmodified as SLEWCTRL_FAST was the macro used and actual desired state.
Tested on am335x-gp-evm with no difference in software performance seen.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
"

Signed-off-by: Christian Amann <Christian.Amann@de.bosch.com>
2018-08-24 16:00:48 -04:00

43 lines
1,004 B
C

/*
* This header provides constants specific to AM33XX pinctrl bindings.
*/
#ifndef _DT_BINDINGS_PINCTRL_AM33XX_H
#define _DT_BINDINGS_PINCTRL_AM33XX_H
#include <dt-bindings/pinctrl/omap.h>
/* am33xx specific mux bit defines */
#undef PULL_ENA
#undef INPUT_EN
#define PULL_DISABLE (1 << 3)
#define INPUT_EN (1 << 5)
#define SLEWCTRL_SLOW (1 << 6)
#define SLEWCTRL_FAST 0
/* update macro depending on INPUT_EN and PULL_ENA */
#undef PIN_OUTPUT
#undef PIN_OUTPUT_PULLUP
#undef PIN_OUTPUT_PULLDOWN
#undef PIN_INPUT
#undef PIN_INPUT_PULLUP
#undef PIN_INPUT_PULLDOWN
#define PIN_OUTPUT (PULL_DISABLE)
#define PIN_OUTPUT_PULLUP (PULL_UP)
#define PIN_OUTPUT_PULLDOWN 0
#define PIN_INPUT (INPUT_EN | PULL_DISABLE)
#define PIN_INPUT_PULLUP (INPUT_EN | PULL_UP)
#define PIN_INPUT_PULLDOWN (INPUT_EN)
/* undef non-existing modes */
#undef PIN_OFF_NONE
#undef PIN_OFF_OUTPUT_HIGH
#undef PIN_OFF_OUTPUT_LOW
#undef PIN_OFF_INPUT_PULLUP
#undef PIN_OFF_INPUT_PULLDOWN
#undef PIN_OFF_WAKEUPENABLE
#endif