mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 01:38:22 +00:00
7208396bbf
This reverts commit5d3a21df66
, reversing changes made to56d37f1c56
. Unfortunately this is causing CI failures: https://travis-ci.org/github/trini/u-boot/jobs/711313649 Signed-off-by: Tom Rini <trini@konsulko.com>
235 lines
5.4 KiB
C
235 lines
5.4 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Driver for one wire controller in some i.MX Socs
|
|
*
|
|
* There are currently two silicon variants:
|
|
* V1: i.MX21, i.MX27, i.MX31, i.MX51
|
|
* V2: i.MX25, i.MX35, i.MX50, i.MX53
|
|
* Newer i.MX SoCs such as the i.MX6 do not have one wire controllers.
|
|
*
|
|
* The V1 controller only supports single bit operations.
|
|
* The V2 controller is backwards compatible on the register level but adds
|
|
* byte size operations and a "search ROM accelerator mode"
|
|
*
|
|
* This driver does not currently support the search ROM accelerator
|
|
*
|
|
* Copyright (c) 2018 Flowbird
|
|
* Martin Fuzzey <martin.fuzzey@flowbird.group>
|
|
*/
|
|
|
|
#include <asm/arch/clock.h>
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <dm/device_compat.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <w1.h>
|
|
|
|
struct mxc_w1_regs {
|
|
u16 control;
|
|
#define MXC_W1_CONTROL_RPP BIT(7)
|
|
#define MXC_W1_CONTROL_PST BIT(6)
|
|
#define MXC_W1_CONTROL_WR(x) BIT(5 - (x))
|
|
#define MXC_W1_CONTROL_RDST BIT(3)
|
|
|
|
u16 time_divider;
|
|
u16 reset;
|
|
|
|
/* Registers below on V2 silicon only */
|
|
u16 command;
|
|
u16 tx_rx;
|
|
u16 interrupt;
|
|
#define MXC_W1_INTERRUPT_TBE BIT(2)
|
|
#define MXC_W1_INTERRUPT_TSRE BIT(3)
|
|
#define MXC_W1_INTERRUPT_RBF BIT(4)
|
|
#define MXC_W1_INTERRUPT_RSRF BIT(5)
|
|
|
|
u16 interrupt_en;
|
|
};
|
|
|
|
struct mxc_w1_pdata {
|
|
struct mxc_w1_regs *regs;
|
|
};
|
|
|
|
/*
|
|
* this is the low level routine to read/write a bit on the One Wire
|
|
* interface on the hardware. It does write 0 if parameter bit is set
|
|
* to 0, otherwise a write 1/read.
|
|
*/
|
|
static u8 mxc_w1_touch_bit(struct mxc_w1_pdata *pdata, u8 bit)
|
|
{
|
|
u16 *ctrl_addr = &pdata->regs->control;
|
|
u16 mask = MXC_W1_CONTROL_WR(bit);
|
|
unsigned int timeout_cnt = 400; /* Takes max. 120us according to
|
|
* datasheet.
|
|
*/
|
|
|
|
writew(mask, ctrl_addr);
|
|
|
|
while (timeout_cnt--) {
|
|
if (!(readw(ctrl_addr) & mask))
|
|
break;
|
|
|
|
udelay(1);
|
|
}
|
|
|
|
return (readw(ctrl_addr) & MXC_W1_CONTROL_RDST) ? 1 : 0;
|
|
}
|
|
|
|
static u8 mxc_w1_read_byte(struct udevice *dev)
|
|
{
|
|
struct mxc_w1_pdata *pdata = dev_get_platdata(dev);
|
|
struct mxc_w1_regs *regs = pdata->regs;
|
|
u16 status;
|
|
|
|
if (dev_get_driver_data(dev) < 2) {
|
|
int i;
|
|
u8 ret = 0;
|
|
|
|
for (i = 0; i < 8; i++)
|
|
ret |= (mxc_w1_touch_bit(pdata, 1) << i);
|
|
|
|
return ret;
|
|
}
|
|
|
|
readw(®s->tx_rx);
|
|
writew(0xFF, ®s->tx_rx);
|
|
|
|
do {
|
|
udelay(1); /* Without this bytes are sometimes duplicated... */
|
|
status = readw(®s->interrupt);
|
|
} while (!(status & MXC_W1_INTERRUPT_RBF));
|
|
|
|
return (u8)readw(®s->tx_rx);
|
|
}
|
|
|
|
static void mxc_w1_write_byte(struct udevice *dev, u8 byte)
|
|
{
|
|
struct mxc_w1_pdata *pdata = dev_get_platdata(dev);
|
|
struct mxc_w1_regs *regs = pdata->regs;
|
|
u16 status;
|
|
|
|
if (dev_get_driver_data(dev) < 2) {
|
|
int i;
|
|
|
|
for (i = 0; i < 8; i++)
|
|
mxc_w1_touch_bit(pdata, (byte >> i) & 0x1);
|
|
|
|
return;
|
|
}
|
|
|
|
readw(®s->tx_rx);
|
|
writew(byte, ®s->tx_rx);
|
|
|
|
do {
|
|
udelay(1);
|
|
status = readw(®s->interrupt);
|
|
} while (!(status & MXC_W1_INTERRUPT_TSRE));
|
|
}
|
|
|
|
static bool mxc_w1_reset(struct udevice *dev)
|
|
{
|
|
struct mxc_w1_pdata *pdata = dev_get_platdata(dev);
|
|
u16 reg_val;
|
|
|
|
writew(MXC_W1_CONTROL_RPP, &pdata->regs->control);
|
|
|
|
do {
|
|
reg_val = readw(&pdata->regs->control);
|
|
} while (reg_val & MXC_W1_CONTROL_RPP);
|
|
|
|
return !(reg_val & MXC_W1_CONTROL_PST);
|
|
}
|
|
|
|
static u8 mxc_w1_triplet(struct udevice *dev, bool bdir)
|
|
{
|
|
struct mxc_w1_pdata *pdata = dev_get_platdata(dev);
|
|
u8 id_bit = mxc_w1_touch_bit(pdata, 1);
|
|
u8 comp_bit = mxc_w1_touch_bit(pdata, 1);
|
|
u8 retval;
|
|
|
|
if (id_bit && comp_bit)
|
|
return 0x03; /* error */
|
|
|
|
if (!id_bit && !comp_bit) {
|
|
/* Both bits are valid, take the direction given */
|
|
retval = bdir ? 0x04 : 0;
|
|
} else {
|
|
/* Only one bit is valid, take that direction */
|
|
bdir = id_bit;
|
|
retval = id_bit ? 0x05 : 0x02;
|
|
}
|
|
|
|
mxc_w1_touch_bit(pdata, bdir);
|
|
|
|
return retval;
|
|
}
|
|
|
|
static int mxc_w1_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
struct mxc_w1_pdata *pdata = dev_get_platdata(dev);
|
|
fdt_addr_t addr;
|
|
|
|
addr = devfdt_get_addr(dev);
|
|
if (addr == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
|
|
pdata->regs = (struct mxc_w1_regs *)addr;
|
|
|
|
return 0;
|
|
};
|
|
|
|
static int mxc_w1_probe(struct udevice *dev)
|
|
{
|
|
struct mxc_w1_pdata *pdata = dev_get_platdata(dev);
|
|
unsigned int clkrate = mxc_get_clock(MXC_IPG_PERCLK);
|
|
unsigned int clkdiv;
|
|
|
|
if (clkrate < 10000000) {
|
|
dev_err(dev, "input clock frequency (%u Hz) too low\n",
|
|
clkrate);
|
|
return -EINVAL;
|
|
}
|
|
|
|
clkdiv = clkrate / 1000000;
|
|
clkrate /= clkdiv;
|
|
if (clkrate < 980000 || clkrate > 1020000) {
|
|
dev_err(dev, "Incorrect time base frequency %u Hz\n", clkrate);
|
|
return -EINVAL;
|
|
}
|
|
|
|
writew(clkdiv - 1, &pdata->regs->time_divider);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct w1_ops mxc_w1_ops = {
|
|
.read_byte = mxc_w1_read_byte,
|
|
.reset = mxc_w1_reset,
|
|
.triplet = mxc_w1_triplet,
|
|
.write_byte = mxc_w1_write_byte,
|
|
};
|
|
|
|
static const struct udevice_id mxc_w1_id[] = {
|
|
{ .compatible = "fsl,imx21-owire", .data = 1 },
|
|
{ .compatible = "fsl,imx27-owire", .data = 1 },
|
|
{ .compatible = "fsl,imx31-owire", .data = 1 },
|
|
{ .compatible = "fsl,imx51-owire", .data = 1 },
|
|
|
|
{ .compatible = "fsl,imx25-owire", .data = 2 },
|
|
{ .compatible = "fsl,imx35-owire", .data = 2 },
|
|
{ .compatible = "fsl,imx50-owire", .data = 2 },
|
|
{ .compatible = "fsl,imx53-owire", .data = 2 },
|
|
{ },
|
|
};
|
|
|
|
U_BOOT_DRIVER(mxc_w1_drv) = {
|
|
.id = UCLASS_W1,
|
|
.name = "mxc_w1_drv",
|
|
.of_match = mxc_w1_id,
|
|
.ofdata_to_platdata = mxc_w1_ofdata_to_platdata,
|
|
.ops = &mxc_w1_ops,
|
|
.platdata_auto_alloc_size = sizeof(struct mxc_w1_pdata),
|
|
.probe = mxc_w1_probe,
|
|
};
|