mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-25 14:10:43 +00:00
8613c8d897
Use the _ptr suffixed variant instead of casting. Also, convert it to dev_read_addr_ptr(), which is safe to CONFIG_OF_LIVE. One curious part is an error check like follows in drivers/watchdog/omap_wdt.c: priv->regs = (struct wd_timer *)devfdt_get_addr(dev); if (!priv->regs) return -EINVAL; devfdt_get_addr() returns FDT_ADDR_T_NONE (i.e. -1) on error. So, this code does not catch any error in DT parsing. dev_read_addr_ptr() returns NULL on error, so this error check will work. I generated this commit by the following command: $ find . -name .git -prune -o -name '*.[ch]' -type f -print | \ xargs sed -i -e 's/([^*)]*\*)devfdt_get_addr(/dev_read_addr_ptr(/' I manually fixed drivers/usb/host/ehci-mx6.c Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
482 lines
11 KiB
C
482 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Faraday MMC/SD Host Controller
|
|
*
|
|
* (C) Copyright 2010 Faraday Technology
|
|
* Dante Su <dantesu@faraday-tech.com>
|
|
*
|
|
* Copyright 2018 Andes Technology, Inc.
|
|
* Author: Rick Chen (rick@andestech.com)
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <log.h>
|
|
#include <malloc.h>
|
|
#include <part.h>
|
|
#include <mmc.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/io.h>
|
|
#include <linux/errno.h>
|
|
#include <asm/byteorder.h>
|
|
#include <faraday/ftsdc010.h>
|
|
#include "ftsdc010_mci.h"
|
|
#include <dm.h>
|
|
#include <dt-structs.h>
|
|
#include <errno.h>
|
|
#include <mapmem.h>
|
|
#include <pwrseq.h>
|
|
#include <syscon.h>
|
|
#include <linux/err.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define CFG_CMD_TIMEOUT (CONFIG_SYS_HZ >> 4) /* 250 ms */
|
|
#define CFG_RST_TIMEOUT CONFIG_SYS_HZ /* 1 sec reset timeout */
|
|
|
|
#if CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
struct ftsdc010 {
|
|
fdt32_t bus_width;
|
|
bool cap_mmc_highspeed;
|
|
bool cap_sd_highspeed;
|
|
fdt32_t clock_freq_min_max[2];
|
|
struct phandle_2_cell clocks[4];
|
|
fdt32_t fifo_depth;
|
|
fdt32_t reg[2];
|
|
};
|
|
#endif
|
|
|
|
struct ftsdc010_plat {
|
|
#if CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
struct ftsdc010 dtplat;
|
|
#endif
|
|
struct mmc_config cfg;
|
|
struct mmc mmc;
|
|
};
|
|
|
|
struct ftsdc_priv {
|
|
struct clk clk;
|
|
struct ftsdc010_chip chip;
|
|
int fifo_depth;
|
|
bool fifo_mode;
|
|
u32 minmax[2];
|
|
};
|
|
|
|
static inline int ftsdc010_send_cmd(struct mmc *mmc, struct mmc_cmd *mmc_cmd)
|
|
{
|
|
struct ftsdc010_chip *chip = mmc->priv;
|
|
struct ftsdc010_mmc __iomem *regs = chip->regs;
|
|
int ret = -ETIMEDOUT;
|
|
uint32_t ts, st;
|
|
uint32_t cmd = FTSDC010_CMD_IDX(mmc_cmd->cmdidx);
|
|
uint32_t arg = mmc_cmd->cmdarg;
|
|
uint32_t flags = mmc_cmd->resp_type;
|
|
|
|
cmd |= FTSDC010_CMD_CMD_EN;
|
|
|
|
if (chip->acmd) {
|
|
cmd |= FTSDC010_CMD_APP_CMD;
|
|
chip->acmd = 0;
|
|
}
|
|
|
|
if (flags & MMC_RSP_PRESENT)
|
|
cmd |= FTSDC010_CMD_NEED_RSP;
|
|
|
|
if (flags & MMC_RSP_136)
|
|
cmd |= FTSDC010_CMD_LONG_RSP;
|
|
|
|
writel(FTSDC010_STATUS_RSP_MASK | FTSDC010_STATUS_CMD_SEND,
|
|
®s->clr);
|
|
writel(arg, ®s->argu);
|
|
writel(cmd, ®s->cmd);
|
|
|
|
if (!(flags & (MMC_RSP_PRESENT | MMC_RSP_136))) {
|
|
for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) {
|
|
if (readl(®s->status) & FTSDC010_STATUS_CMD_SEND) {
|
|
writel(FTSDC010_STATUS_CMD_SEND, ®s->clr);
|
|
ret = 0;
|
|
break;
|
|
}
|
|
}
|
|
} else {
|
|
st = 0;
|
|
for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) {
|
|
st = readl(®s->status);
|
|
writel(st & FTSDC010_STATUS_RSP_MASK, ®s->clr);
|
|
if (st & FTSDC010_STATUS_RSP_MASK)
|
|
break;
|
|
}
|
|
if (st & FTSDC010_STATUS_RSP_CRC_OK) {
|
|
if (flags & MMC_RSP_136) {
|
|
mmc_cmd->response[0] = readl(®s->rsp3);
|
|
mmc_cmd->response[1] = readl(®s->rsp2);
|
|
mmc_cmd->response[2] = readl(®s->rsp1);
|
|
mmc_cmd->response[3] = readl(®s->rsp0);
|
|
} else {
|
|
mmc_cmd->response[0] = readl(®s->rsp0);
|
|
}
|
|
ret = 0;
|
|
} else {
|
|
debug("ftsdc010: rsp err (cmd=%d, st=0x%x)\n",
|
|
mmc_cmd->cmdidx, st);
|
|
}
|
|
}
|
|
|
|
if (ret) {
|
|
debug("ftsdc010: cmd timeout (op code=%d)\n",
|
|
mmc_cmd->cmdidx);
|
|
} else if (mmc_cmd->cmdidx == MMC_CMD_APP_CMD) {
|
|
chip->acmd = 1;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void ftsdc010_clkset(struct mmc *mmc, uint32_t rate)
|
|
{
|
|
struct ftsdc010_chip *chip = mmc->priv;
|
|
struct ftsdc010_mmc __iomem *regs = chip->regs;
|
|
uint32_t div;
|
|
|
|
for (div = 0; div < 0x7f; ++div) {
|
|
if (rate >= chip->sclk / (2 * (div + 1)))
|
|
break;
|
|
}
|
|
chip->rate = chip->sclk / (2 * (div + 1));
|
|
|
|
writel(FTSDC010_CCR_CLK_DIV(div), ®s->ccr);
|
|
|
|
if (IS_SD(mmc)) {
|
|
setbits_le32(®s->ccr, FTSDC010_CCR_CLK_SD);
|
|
|
|
if (chip->rate > 25000000)
|
|
setbits_le32(®s->ccr, FTSDC010_CCR_CLK_HISPD);
|
|
else
|
|
clrbits_le32(®s->ccr, FTSDC010_CCR_CLK_HISPD);
|
|
}
|
|
}
|
|
|
|
static int ftsdc010_wait(struct ftsdc010_mmc __iomem *regs, uint32_t mask)
|
|
{
|
|
int ret = -ETIMEDOUT;
|
|
uint32_t st, timeout = 10000000;
|
|
while (timeout--) {
|
|
st = readl(®s->status);
|
|
if (!(st & mask))
|
|
continue;
|
|
writel(st & mask, ®s->clr);
|
|
ret = 0;
|
|
break;
|
|
}
|
|
|
|
if (ret){
|
|
debug("ftsdc010: wait st(0x%x) timeout\n", mask);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* u-boot mmc api
|
|
*/
|
|
static int ftsdc010_request(struct udevice *dev, struct mmc_cmd *cmd,
|
|
struct mmc_data *data)
|
|
{
|
|
struct mmc *mmc = mmc_get_mmc_dev(dev);
|
|
int ret = -EOPNOTSUPP;
|
|
uint32_t len = 0;
|
|
struct ftsdc010_chip *chip = mmc->priv;
|
|
struct ftsdc010_mmc __iomem *regs = chip->regs;
|
|
|
|
if (data && (data->flags & MMC_DATA_WRITE) && chip->wprot) {
|
|
printf("ftsdc010: the card is write protected!\n");
|
|
return ret;
|
|
}
|
|
|
|
if (data) {
|
|
uint32_t dcr;
|
|
|
|
len = data->blocksize * data->blocks;
|
|
|
|
/* 1. data disable + fifo reset */
|
|
dcr = 0;
|
|
#ifdef CONFIG_FTSDC010_SDIO
|
|
dcr |= FTSDC010_DCR_FIFO_RST;
|
|
#endif
|
|
writel(dcr, ®s->dcr);
|
|
|
|
/* 2. clear status register */
|
|
writel(FTSDC010_STATUS_DATA_MASK | FTSDC010_STATUS_FIFO_URUN
|
|
| FTSDC010_STATUS_FIFO_ORUN, ®s->clr);
|
|
|
|
/* 3. data timeout (1 sec) */
|
|
writel(chip->rate, ®s->dtr);
|
|
|
|
/* 4. data length (bytes) */
|
|
writel(len, ®s->dlr);
|
|
|
|
/* 5. data enable */
|
|
dcr = (ffs(data->blocksize) - 1) | FTSDC010_DCR_DATA_EN;
|
|
if (data->flags & MMC_DATA_WRITE)
|
|
dcr |= FTSDC010_DCR_DATA_WRITE;
|
|
writel(dcr, ®s->dcr);
|
|
}
|
|
|
|
ret = ftsdc010_send_cmd(mmc, cmd);
|
|
if (ret) {
|
|
printf("ftsdc010: CMD%d failed\n", cmd->cmdidx);
|
|
return ret;
|
|
}
|
|
|
|
if (!data)
|
|
return ret;
|
|
|
|
if (data->flags & MMC_DATA_WRITE) {
|
|
const uint8_t *buf = (const uint8_t *)data->src;
|
|
|
|
while (len > 0) {
|
|
int wlen;
|
|
|
|
/* wait for tx ready */
|
|
ret = ftsdc010_wait(regs, FTSDC010_STATUS_FIFO_URUN);
|
|
if (ret)
|
|
break;
|
|
|
|
/* write bytes to ftsdc010 */
|
|
for (wlen = 0; wlen < len && wlen < chip->fifo; ) {
|
|
writel(*(uint32_t *)buf, ®s->dwr);
|
|
buf += 4;
|
|
wlen += 4;
|
|
}
|
|
|
|
len -= wlen;
|
|
}
|
|
|
|
} else {
|
|
uint8_t *buf = (uint8_t *)data->dest;
|
|
|
|
while (len > 0) {
|
|
int rlen;
|
|
|
|
/* wait for rx ready */
|
|
ret = ftsdc010_wait(regs, FTSDC010_STATUS_FIFO_ORUN);
|
|
if (ret)
|
|
break;
|
|
|
|
/* fetch bytes from ftsdc010 */
|
|
for (rlen = 0; rlen < len && rlen < chip->fifo; ) {
|
|
*(uint32_t *)buf = readl(®s->dwr);
|
|
buf += 4;
|
|
rlen += 4;
|
|
}
|
|
|
|
len -= rlen;
|
|
}
|
|
|
|
}
|
|
|
|
if (!ret) {
|
|
ret = ftsdc010_wait(regs,
|
|
FTSDC010_STATUS_DATA_END | FTSDC010_STATUS_DATA_CRC_OK);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ftsdc010_set_ios(struct udevice *dev)
|
|
{
|
|
struct mmc *mmc = mmc_get_mmc_dev(dev);
|
|
struct ftsdc010_chip *chip = mmc->priv;
|
|
struct ftsdc010_mmc __iomem *regs = chip->regs;
|
|
|
|
ftsdc010_clkset(mmc, mmc->clock);
|
|
|
|
clrbits_le32(®s->bwr, FTSDC010_BWR_MODE_MASK);
|
|
switch (mmc->bus_width) {
|
|
case 4:
|
|
setbits_le32(®s->bwr, FTSDC010_BWR_MODE_4BIT);
|
|
break;
|
|
case 8:
|
|
setbits_le32(®s->bwr, FTSDC010_BWR_MODE_8BIT);
|
|
break;
|
|
default:
|
|
setbits_le32(®s->bwr, FTSDC010_BWR_MODE_1BIT);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ftsdc010_get_cd(struct udevice *dev)
|
|
{
|
|
struct mmc *mmc = mmc_get_mmc_dev(dev);
|
|
struct ftsdc010_chip *chip = mmc->priv;
|
|
struct ftsdc010_mmc __iomem *regs = chip->regs;
|
|
return !(readl(®s->status) & FTSDC010_STATUS_CARD_DETECT);
|
|
}
|
|
|
|
static int ftsdc010_get_wp(struct udevice *dev)
|
|
{
|
|
struct mmc *mmc = mmc_get_mmc_dev(dev);
|
|
struct ftsdc010_chip *chip = mmc->priv;
|
|
struct ftsdc010_mmc __iomem *regs = chip->regs;
|
|
if (readl(®s->status) & FTSDC010_STATUS_WRITE_PROT) {
|
|
printf("ftsdc010: write protected\n");
|
|
chip->wprot = 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ftsdc010_init(struct mmc *mmc)
|
|
{
|
|
struct ftsdc010_chip *chip = mmc->priv;
|
|
struct ftsdc010_mmc __iomem *regs = chip->regs;
|
|
uint32_t ts;
|
|
|
|
chip->fifo = (readl(®s->feature) & 0xff) << 2;
|
|
|
|
/* 1. chip reset */
|
|
writel(FTSDC010_CMD_SDC_RST, ®s->cmd);
|
|
for (ts = get_timer(0); get_timer(ts) < CFG_RST_TIMEOUT; ) {
|
|
if (readl(®s->cmd) & FTSDC010_CMD_SDC_RST)
|
|
continue;
|
|
break;
|
|
}
|
|
if (readl(®s->cmd) & FTSDC010_CMD_SDC_RST) {
|
|
printf("ftsdc010: reset failed\n");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
/* 2. enter low speed mode (400k card detection) */
|
|
ftsdc010_clkset(mmc, 400000);
|
|
|
|
/* 3. interrupt disabled */
|
|
writel(0, ®s->int_mask);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ftsdc010_probe(struct udevice *dev)
|
|
{
|
|
struct mmc *mmc = mmc_get_mmc_dev(dev);
|
|
return ftsdc010_init(mmc);
|
|
}
|
|
|
|
const struct dm_mmc_ops dm_ftsdc010_mmc_ops = {
|
|
.send_cmd = ftsdc010_request,
|
|
.set_ios = ftsdc010_set_ios,
|
|
.get_cd = ftsdc010_get_cd,
|
|
.get_wp = ftsdc010_get_wp,
|
|
};
|
|
|
|
static void ftsdc_setup_cfg(struct mmc_config *cfg, const char *name, int buswidth,
|
|
uint caps, u32 max_clk, u32 min_clk)
|
|
{
|
|
cfg->name = name;
|
|
cfg->f_min = min_clk;
|
|
cfg->f_max = max_clk;
|
|
cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
|
|
cfg->host_caps = caps;
|
|
if (buswidth == 8) {
|
|
cfg->host_caps |= MMC_MODE_8BIT;
|
|
cfg->host_caps &= ~MMC_MODE_4BIT;
|
|
} else {
|
|
cfg->host_caps |= MMC_MODE_4BIT;
|
|
cfg->host_caps &= ~MMC_MODE_8BIT;
|
|
}
|
|
cfg->part_type = PART_TYPE_DOS;
|
|
cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
|
|
}
|
|
|
|
static int ftsdc010_mmc_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
struct ftsdc_priv *priv = dev_get_priv(dev);
|
|
struct ftsdc010_chip *chip = &priv->chip;
|
|
chip->name = dev->name;
|
|
chip->ioaddr = dev_read_addr_ptr(dev);
|
|
chip->buswidth = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
|
|
"bus-width", 4);
|
|
chip->priv = dev;
|
|
priv->fifo_depth = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
|
|
"fifo-depth", 0);
|
|
priv->fifo_mode = fdtdec_get_bool(gd->fdt_blob, dev_of_offset(dev),
|
|
"fifo-mode");
|
|
if (fdtdec_get_int_array(gd->fdt_blob, dev_of_offset(dev),
|
|
"clock-freq-min-max", priv->minmax, 2)) {
|
|
int val = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
|
|
"max-frequency", -EINVAL);
|
|
if (val < 0)
|
|
return val;
|
|
|
|
priv->minmax[0] = 400000; /* 400 kHz */
|
|
priv->minmax[1] = val;
|
|
} else {
|
|
debug("%s: 'clock-freq-min-max' property was deprecated.\n",
|
|
__func__);
|
|
}
|
|
#endif
|
|
chip->sclk = priv->minmax[1];
|
|
chip->regs = chip->ioaddr;
|
|
return 0;
|
|
}
|
|
|
|
static int ftsdc010_mmc_probe(struct udevice *dev)
|
|
{
|
|
struct ftsdc010_plat *plat = dev_get_platdata(dev);
|
|
struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
|
|
struct ftsdc_priv *priv = dev_get_priv(dev);
|
|
struct ftsdc010_chip *chip = &priv->chip;
|
|
struct udevice *pwr_dev __maybe_unused;
|
|
|
|
#if CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
int ret;
|
|
struct ftsdc010 *dtplat = &plat->dtplat;
|
|
chip->name = dev->name;
|
|
chip->ioaddr = map_sysmem(dtplat->reg[0], dtplat->reg[1]);
|
|
chip->buswidth = dtplat->bus_width;
|
|
chip->priv = dev;
|
|
chip->dev_index = 1;
|
|
memcpy(priv->minmax, dtplat->clock_freq_min_max, sizeof(priv->minmax));
|
|
ret = clk_get_by_driver_info(dev, dtplat->clocks, &priv->clk);
|
|
if (ret < 0)
|
|
return ret;
|
|
#endif
|
|
|
|
if (dev_read_bool(dev, "cap-mmc-highspeed") || \
|
|
dev_read_bool(dev, "cap-sd-highspeed"))
|
|
chip->caps |= MMC_MODE_HS | MMC_MODE_HS_52MHz;
|
|
|
|
ftsdc_setup_cfg(&plat->cfg, dev->name, chip->buswidth, chip->caps,
|
|
priv->minmax[1] , priv->minmax[0]);
|
|
chip->mmc = &plat->mmc;
|
|
chip->mmc->priv = &priv->chip;
|
|
chip->mmc->dev = dev;
|
|
upriv->mmc = chip->mmc;
|
|
return ftsdc010_probe(dev);
|
|
}
|
|
|
|
int ftsdc010_mmc_bind(struct udevice *dev)
|
|
{
|
|
struct ftsdc010_plat *plat = dev_get_platdata(dev);
|
|
|
|
return mmc_bind(dev, &plat->mmc, &plat->cfg);
|
|
}
|
|
|
|
static const struct udevice_id ftsdc010_mmc_ids[] = {
|
|
{ .compatible = "andestech,atfsdc010" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(ftsdc010_mmc) = {
|
|
.name = "ftsdc010_mmc",
|
|
.id = UCLASS_MMC,
|
|
.of_match = ftsdc010_mmc_ids,
|
|
.ofdata_to_platdata = ftsdc010_mmc_ofdata_to_platdata,
|
|
.ops = &dm_ftsdc010_mmc_ops,
|
|
.bind = ftsdc010_mmc_bind,
|
|
.probe = ftsdc010_mmc_probe,
|
|
.priv_auto_alloc_size = sizeof(struct ftsdc_priv),
|
|
.platdata_auto_alloc_size = sizeof(struct ftsdc010_plat),
|
|
};
|