mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-11 15:37:23 +00:00
99b97106f3
Enable initialization fo designware ethernet controller. With this patch, ethernet works in my configuration, provided I set ethernet address in the environment. Signed-off-by: Pavel Machek <pavel@denx.de>
287 lines
7.5 KiB
C
287 lines
7.5 KiB
C
/*
|
|
* Copyright (C) 2012 Altera Corporation <www.altera.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#include <asm/arch/socfpga_base_addrs.h>
|
|
#include "../../board/altera/socfpga/pinmux_config.h"
|
|
#include "../../board/altera/socfpga/iocsr_config.h"
|
|
#include "../../board/altera/socfpga/pll_config.h"
|
|
|
|
/*
|
|
* High level configuration
|
|
*/
|
|
/* Virtual target or real hardware */
|
|
#undef CONFIG_SOCFPGA_VIRTUAL_TARGET
|
|
|
|
#define CONFIG_ARMV7
|
|
#define CONFIG_SYS_DCACHE_OFF
|
|
#undef CONFIG_USE_IRQ
|
|
|
|
#define CONFIG_MISC_INIT_R
|
|
#define CONFIG_SINGLE_BOOTLOADER
|
|
#define CONFIG_SOCFPGA
|
|
|
|
/* base address for .text section */
|
|
#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
|
|
#define CONFIG_SYS_TEXT_BASE 0x08000040
|
|
#else
|
|
#define CONFIG_SYS_TEXT_BASE 0x01000040
|
|
#endif
|
|
#define CONFIG_SYS_LOAD_ADDR 0x7fc0
|
|
|
|
/* Console I/O Buffer Size */
|
|
#define CONFIG_SYS_CBSIZE 256
|
|
/* Monitor Command Prompt */
|
|
#define CONFIG_SYS_PROMPT "SOCFPGA_CYCLONE5 # "
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
|
|
sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
|
|
/*
|
|
* Display CPU and Board Info
|
|
*/
|
|
#define CONFIG_DISPLAY_CPUINFO
|
|
#define CONFIG_DISPLAY_BOARDINFO
|
|
|
|
/*
|
|
* Enable early stage initialization at C environment
|
|
*/
|
|
#define CONFIG_BOARD_EARLY_INIT_F
|
|
|
|
/* flat device tree */
|
|
#define CONFIG_OF_LIBFDT
|
|
/* skip updating the FDT blob */
|
|
#define CONFIG_FDT_BLOB_SKIP_UPDATE
|
|
/* Initial Memory map size for Linux, minus 4k alignment for DFT blob */
|
|
#define CONFIG_SYS_BOOTMAPSZ ((256*1024*1024) - (4*1024))
|
|
|
|
#define CONFIG_SPL_RAM_DEVICE
|
|
#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
|
|
#define CONFIG_SYS_SPL_MALLOC_START ((unsigned long) (&__malloc_start))
|
|
#define CONFIG_SYS_SPL_MALLOC_SIZE (&__malloc_end - &__malloc_start)
|
|
|
|
/*
|
|
* Memory allocation (MALLOC)
|
|
*/
|
|
/* Room required on the stack for the environment data */
|
|
#define CONFIG_ENV_SIZE 1024
|
|
/* Size of DRAM reserved for malloc() use */
|
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
|
|
|
|
/* SP location before relocation, must use scratch RAM */
|
|
#define CONFIG_SYS_INIT_RAM_ADDR 0xFFFF0000
|
|
/* Reserving 0x100 space at back of scratch RAM for debug info */
|
|
#define CONFIG_SYS_INIT_RAM_SIZE (0x10000 - 0x100)
|
|
/* Stack pointer prior relocation, must situated at on-chip RAM */
|
|
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
|
|
CONFIG_SYS_INIT_RAM_SIZE - \
|
|
GENERATED_GBL_DATA_SIZE)
|
|
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#define CONFIG_SYS_NO_FLASH
|
|
#include <config_cmd_default.h>
|
|
/* FAT file system support */
|
|
#define CONFIG_CMD_FAT
|
|
|
|
|
|
/*
|
|
* Misc
|
|
*/
|
|
#define CONFIG_DOS_PARTITION 1
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#undef CONFIG_PARTITIONS
|
|
#endif
|
|
|
|
/*
|
|
* Environment setup
|
|
*/
|
|
|
|
/* Delay before automatically booting the default image */
|
|
#define CONFIG_BOOTDELAY 3
|
|
/* Enable auto completion of commands using TAB */
|
|
#define CONFIG_AUTO_COMPLETE
|
|
/* use "hush" command parser */
|
|
#define CONFIG_SYS_HUSH_PARSER
|
|
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
|
|
#define CONFIG_CMD_RUN
|
|
|
|
#define CONFIG_BOOTCOMMAND "run ramboot"
|
|
|
|
/*
|
|
* arguments passed to the bootm command. The value of
|
|
* CONFIG_BOOTARGS goes into the environment value "bootargs".
|
|
* Do note the value will overide also the chosen node in FDT blob.
|
|
*/
|
|
#define CONFIG_BOOTARGS "console=ttyS0,57600,mem=256M@0x0"
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"verify=n\0" \
|
|
"loadaddr= " __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
|
|
"ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \
|
|
"bootm ${loadaddr} - ${fdt_addr}\0" \
|
|
"bootimage=uImage\0" \
|
|
"fdt_addr=100\0" \
|
|
"fsloadcmd=ext2load\0" \
|
|
"bootm ${loadaddr} - ${fdt_addr}\0" \
|
|
"qspiroot=/dev/mtdblock0\0" \
|
|
"qspirootfstype=jffs2\0" \
|
|
"qspiboot=setenv bootargs " CONFIG_BOOTARGS \
|
|
" root=${qspiroot} rw rootfstype=${qspirootfstype};"\
|
|
"bootm ${loadaddr} - ${fdt_addr}\0"
|
|
|
|
/* using environment setting for stdin, stdout, stderr */
|
|
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
|
|
/* Enable the call to overwrite_console() */
|
|
#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
|
|
/* Enable overwrite of previous console environment settings */
|
|
#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE
|
|
|
|
/* max number of command args */
|
|
#define CONFIG_SYS_MAXARGS 16
|
|
|
|
|
|
/*
|
|
* Hardware drivers
|
|
*/
|
|
|
|
/*
|
|
* SDRAM Memory Map
|
|
*/
|
|
/* We have 1 bank of DRAM */
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
/* SDRAM Bank #1 */
|
|
#define CONFIG_SYS_SDRAM_BASE 0x00000000
|
|
/* SDRAM memory size */
|
|
#define PHYS_SDRAM_1_SIZE 0x40000000
|
|
|
|
#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
|
|
#define CONFIG_SYS_MEMTEST_START 0x00000000
|
|
#define CONFIG_SYS_MEMTEST_END PHYS_SDRAM_1_SIZE
|
|
|
|
/*
|
|
* NS16550 Configuration
|
|
*/
|
|
#define UART0_BASE SOCFPGA_UART0_ADDRESS
|
|
#define CONFIG_SYS_NS16550
|
|
#define CONFIG_SYS_NS16550_SERIAL
|
|
#define CONFIG_SYS_NS16550_REG_SIZE -4
|
|
#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
|
|
#define CONFIG_CONS_INDEX 1
|
|
#define CONFIG_SYS_NS16550_COM1 UART0_BASE
|
|
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, 115200}
|
|
#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
|
|
#define V_NS16550_CLK 1000000
|
|
#else
|
|
#define V_NS16550_CLK 100000000
|
|
#endif
|
|
#define CONFIG_BAUDRATE 115200
|
|
|
|
/*
|
|
* FLASH
|
|
*/
|
|
#define CONFIG_SYS_NO_FLASH
|
|
|
|
/*
|
|
* L4 OSC1 Timer 0
|
|
*/
|
|
/* This timer use eosc1 where the clock frequency is fixed
|
|
* throughout any condition */
|
|
#define CONFIG_SYS_TIMERBASE SOCFPGA_OSC1TIMER0_ADDRESS
|
|
/* reload value when timer count to zero */
|
|
#define TIMER_LOAD_VAL 0xFFFFFFFF
|
|
/* Timer info */
|
|
#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
|
|
#define CONFIG_SYS_TIMER_RATE 2400000
|
|
#else
|
|
#define CONFIG_SYS_TIMER_RATE 25000000
|
|
#endif
|
|
#define CONFIG_SYS_TIMER_COUNTS_DOWN
|
|
#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMERBASE + 0x4)
|
|
|
|
#define CONFIG_ENV_IS_NOWHERE
|
|
|
|
/*
|
|
* network support
|
|
*/
|
|
#ifndef CONFIG_SOCFPGA_VIRTUAL_TARGET
|
|
#define CONFIG_DESIGNWARE_ETH 1
|
|
#endif
|
|
|
|
#ifdef CONFIG_DESIGNWARE_ETH
|
|
#define CONFIG_EMAC0_BASE SOCFPGA_EMAC0_ADDRESS
|
|
#define CONFIG_EMAC1_BASE SOCFPGA_EMAC1_ADDRESS
|
|
/* console support for network */
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_MII
|
|
#define CONFIG_CMD_NET
|
|
#define CONFIG_CMD_PING
|
|
/* designware */
|
|
#define CONFIG_NET_MULTI
|
|
#define CONFIG_DW_ALTDESCRIPTOR
|
|
#define CONFIG_DW_SEARCH_PHY
|
|
#define CONFIG_MII
|
|
#define CONFIG_PHY_GIGE
|
|
#define CONFIG_DW_AUTONEG
|
|
#define CONFIG_AUTONEG_TIMEOUT (15 * CONFIG_SYS_HZ)
|
|
#define CONFIG_PHYLIB
|
|
#define CONFIG_PHY_MICREL
|
|
#define CONFIG_PHY_MICREL_KSZ9021
|
|
/* EMAC controller and PHY used */
|
|
#define CONFIG_EMAC_BASE CONFIG_EMAC1_BASE
|
|
#define CONFIG_EPHY_PHY_ADDR CONFIG_EPHY1_PHY_ADDR
|
|
#define CONFIG_PHY_INTERFACE_MODE PHY_INTERFACE_MODE_RGMII
|
|
#endif /* CONFIG_DESIGNWARE_ETH */
|
|
|
|
/*
|
|
* L4 Watchdog
|
|
*/
|
|
#define CONFIG_HW_WATCHDOG
|
|
#define CONFIG_HW_WATCHDOG_TIMEOUT_MS 2000
|
|
#define CONFIG_DESIGNWARE_WATCHDOG
|
|
#define CONFIG_DW_WDT_BASE SOCFPGA_L4WD0_ADDRESS
|
|
/* Clocks source frequency to watchdog timer */
|
|
#define CONFIG_DW_WDT_CLOCK_KHZ 25000
|
|
|
|
|
|
/*
|
|
* SPL "Second Program Loader" aka Initial Software
|
|
*/
|
|
|
|
/* Enable building of SPL globally */
|
|
#define CONFIG_SPL_FRAMEWORK
|
|
|
|
/* TEXT_BASE for linking the SPL binary */
|
|
#define CONFIG_SPL_TEXT_BASE 0xFFFF0000
|
|
|
|
/* Stack size for SPL */
|
|
#define CONFIG_SPL_STACK_SIZE (4 * 1024)
|
|
|
|
/* MALLOC size for SPL */
|
|
#define CONFIG_SPL_MALLOC_SIZE (5 * 1024)
|
|
|
|
#define CONFIG_SPL_SERIAL_SUPPORT
|
|
#define CONFIG_SPL_BOARD_INIT
|
|
|
|
#define CHUNKSZ_CRC32 (1 * 1024)
|
|
|
|
#define CONFIG_CRC32_VERIFY
|
|
|
|
/* Linker script for SPL */
|
|
#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/socfpga/u-boot-spl.lds"
|
|
|
|
/* Support for common/libcommon.o in SPL binary */
|
|
#define CONFIG_SPL_LIBCOMMON_SUPPORT
|
|
/* Support for lib/libgeneric.o in SPL binary */
|
|
#define CONFIG_SPL_LIBGENERIC_SUPPORT
|
|
|
|
/* Support for watchdog */
|
|
#define CONFIG_SPL_WATCHDOG_SUPPORT
|
|
|
|
#endif /* __CONFIG_H */
|