mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-28 15:41:40 +00:00
2b3b3511bd
When running 'mkimage -l' is called for a valid StarFive file an error
message "Error: invalid marker bytes" is written by the Renesas SPKG
driver.
mkimage -l may be invoked without specifying an image type. In this case
mkimage iterates over all image type drivers to find the one that matches.
None of the non-matching drivers should write an error message.
Fix the Renesas SPKG driver.
Fixes: afdfcb11f9
("tools: spkgimage: add Renesas SPKG format")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
337 lines
8.9 KiB
C
337 lines
8.9 KiB
C
// SPDX-License-Identifier: BSD-2-Clause
|
|
/*
|
|
* Generate Renesas RZ/N1 BootROM header (SPKG)
|
|
* (C) Copyright 2022 Schneider Electric
|
|
*
|
|
* Based on spkg_utility.c
|
|
* (C) Copyright 2016 Renesas Electronics Europe Ltd
|
|
*/
|
|
|
|
#include "imagetool.h"
|
|
#include <limits.h>
|
|
#include <image.h>
|
|
#include <stdarg.h>
|
|
#include <stdint.h>
|
|
#include <u-boot/crc.h>
|
|
#include "renesas_spkgimage.h"
|
|
|
|
/* Note: the ordering of the bitfields does not matter */
|
|
struct config_file {
|
|
unsigned int version:1;
|
|
unsigned int ecc_block_size:2;
|
|
unsigned int ecc_enable:1;
|
|
unsigned int ecc_scheme:3;
|
|
unsigned int ecc_bytes:8;
|
|
unsigned int blp_len;
|
|
unsigned int padding;
|
|
};
|
|
|
|
static struct config_file conf;
|
|
|
|
static int check_range(const char *name, int val, int min, int max)
|
|
{
|
|
if (val < min) {
|
|
fprintf(stderr, "Warning: param '%s' adjusted to min %d\n",
|
|
name, min);
|
|
val = min;
|
|
}
|
|
|
|
if (val > max) {
|
|
fprintf(stderr, "Warning: param '%s' adjusted to max %d\n",
|
|
name, max);
|
|
val = max;
|
|
}
|
|
|
|
return val;
|
|
}
|
|
|
|
static int spkgimage_parse_config_line(char *line, size_t line_num)
|
|
{
|
|
char *saveptr;
|
|
char *delim = "\t ";
|
|
char *name = strtok_r(line, delim, &saveptr);
|
|
char *val_str = strtok_r(NULL, delim, &saveptr);
|
|
int value = atoi(val_str);
|
|
|
|
if (!strcmp("VERSION", name)) {
|
|
conf.version = check_range(name, value, 1, 15);
|
|
} else if (!strcmp("NAND_ECC_ENABLE", name)) {
|
|
conf.ecc_enable = check_range(name, value, 0, 1);
|
|
} else if (!strcmp("NAND_ECC_BLOCK_SIZE", name)) {
|
|
conf.ecc_block_size = check_range(name, value, 0, 2);
|
|
} else if (!strcmp("NAND_ECC_SCHEME", name)) {
|
|
conf.ecc_scheme = check_range(name, value, 0, 7);
|
|
} else if (!strcmp("NAND_BYTES_PER_ECC_BLOCK", name)) {
|
|
conf.ecc_bytes = check_range(name, value, 0, 255);
|
|
} else if (!strcmp("ADD_DUMMY_BLP", name)) {
|
|
conf.blp_len = value ? SPKG_BLP_SIZE : 0;
|
|
} else if (!strcmp("PADDING", name)) {
|
|
if (strrchr(val_str, 'K'))
|
|
value = value * 1024;
|
|
else if (strrchr(val_str, 'M'))
|
|
value = value * 1024 * 1024;
|
|
conf.padding = check_range(name, value, 1, INT_MAX);
|
|
} else {
|
|
fprintf(stderr,
|
|
"config error: unknown keyword on line %zu\n",
|
|
line_num);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int spkgimage_parse_config_file(char *filename)
|
|
{
|
|
FILE *fcfg;
|
|
char line[256];
|
|
size_t line_num = 0;
|
|
|
|
fcfg = fopen(filename, "r");
|
|
if (!fcfg)
|
|
return -EINVAL;
|
|
|
|
while (fgets(line, sizeof(line), fcfg)) {
|
|
line_num += 1;
|
|
|
|
/* Skip blank lines and comments */
|
|
if (line[0] == '\n' || line[0] == '#')
|
|
continue;
|
|
|
|
/* Strip any trailing newline */
|
|
line[strcspn(line, "\n")] = 0;
|
|
|
|
/* Parse the line */
|
|
if (spkgimage_parse_config_line(line, line_num))
|
|
return -EINVAL;
|
|
}
|
|
|
|
fclose(fcfg);
|
|
|
|
/* Avoid divide-by-zero later on */
|
|
if (!conf.padding)
|
|
conf.padding = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int spkgimage_check_params(struct image_tool_params *params)
|
|
{
|
|
if (!params->addr) {
|
|
fprintf(stderr, "Error: Load Address must be set.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!params->imagename || !params->imagename[0]) {
|
|
fprintf(stderr, "Error: Image name must be set.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!params->datafile) {
|
|
fprintf(stderr, "Error: Data filename must be set.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int spkgimage_verify_header(unsigned char *ptr, int size,
|
|
struct image_tool_params *param)
|
|
{
|
|
struct spkg_file *file = (struct spkg_file *)ptr;
|
|
struct spkg_hdr *header = (struct spkg_hdr *)ptr;
|
|
char marker[4] = SPKG_HEADER_MARKER;
|
|
uint32_t payload_length;
|
|
uint32_t crc;
|
|
uint8_t *crc_buf;
|
|
|
|
/* Check the marker bytes */
|
|
if (memcmp(header->marker, marker, 4)) {
|
|
if (param->type == IH_TYPE_RENESAS_SPKG)
|
|
fprintf(stderr, "Error: invalid marker bytes\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Check the CRC */
|
|
crc = crc32(0, ptr, SPKG_HEADER_SIZE - SPKG_CRC_SIZE);
|
|
if (crc != header->crc) {
|
|
fprintf(stderr, "Error: invalid header CRC=\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Check all copies of header are the same */
|
|
for (int i = 1; i < SPKG_HEADER_COUNT; i++) {
|
|
if (memcmp(&header[0], &header[i], SPKG_HEADER_SIZE)) {
|
|
fprintf(stderr, "Error: header %d mismatch\n", i);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/* Check the payload CRC */
|
|
payload_length = le32_to_cpu(header->payload_length) >> 8;
|
|
crc_buf = file->payload + payload_length - SPKG_CRC_SIZE;
|
|
crc = crc32(0, file->payload, payload_length - SPKG_CRC_SIZE);
|
|
if (crc_buf[0] != (crc & 0xff) ||
|
|
crc_buf[1] != (crc >> 8 & 0xff) ||
|
|
crc_buf[2] != (crc >> 16 & 0xff) ||
|
|
crc_buf[3] != (crc >> 24 & 0xff)) {
|
|
fprintf(stderr, "Error: invalid payload CRC\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void spkgimage_print_header(const void *ptr,
|
|
struct image_tool_params *image)
|
|
{
|
|
const struct spkg_hdr *h = ptr;
|
|
uint32_t offset = le32_to_cpu(h->execution_offset);
|
|
|
|
printf("Image type\t: Renesas SPKG Image\n");
|
|
printf("Marker\t\t: %c%c%c%c\n",
|
|
h->marker[0], h->marker[1], h->marker[2], h->marker[3]);
|
|
printf("Version\t\t: %d\n", h->version);
|
|
printf("ECC\t\t: ");
|
|
if (h->ecc & 0x20)
|
|
printf("Scheme %d, Block size %d, Strength %d\n",
|
|
h->ecc_scheme, (h->ecc >> 1) & 3, h->ecc_bytes);
|
|
else
|
|
printf("Not enabled\n");
|
|
printf("Payload length\t: %d\n", le32_to_cpu(h->payload_length) >> 8);
|
|
printf("Load address\t: 0x%08x\n", le32_to_cpu(h->load_address));
|
|
printf("Execution offset: 0x%08x (%s mode)\n", offset & ~1,
|
|
offset & 1 ? "THUMB" : "ARM");
|
|
printf("Header checksum\t: 0x%08x\n", le32_to_cpu(h->crc));
|
|
}
|
|
|
|
/*
|
|
* This is the same as the macro version in include/kernel.h.
|
|
* However we cannot include that header, because for host tools,
|
|
* it ends up pulling in the host /usr/include/linux/kernel.h,
|
|
* which lacks the definition of roundup().
|
|
*/
|
|
static inline uint32_t roundup(uint32_t x, uint32_t y)
|
|
{
|
|
return ((x + y - 1) / y) * y;
|
|
}
|
|
|
|
static int spkgimage_vrec_header(struct image_tool_params *params,
|
|
struct image_type_params *tparams)
|
|
{
|
|
struct stat s;
|
|
struct spkg_file *out_buf;
|
|
|
|
/* Parse the config file */
|
|
if (spkgimage_parse_config_file(params->imagename)) {
|
|
fprintf(stderr, "Error parsing config file\n");
|
|
exit(EXIT_FAILURE);
|
|
}
|
|
|
|
/* Get size of input data file */
|
|
if (stat(params->datafile, &s)) {
|
|
fprintf(stderr, "Could not stat data file: %s: %s\n",
|
|
params->datafile, strerror(errno));
|
|
exit(EXIT_FAILURE);
|
|
}
|
|
params->orig_file_size = s.st_size;
|
|
|
|
/* Determine size of resulting SPKG file */
|
|
uint32_t header_len = SPKG_HEADER_SIZE * SPKG_HEADER_COUNT;
|
|
uint32_t payload_len = conf.blp_len + s.st_size + SPKG_CRC_SIZE;
|
|
uint32_t total_len = header_len + payload_len;
|
|
|
|
/* Round up to next multiple of padding size */
|
|
uint32_t padded_len = roundup(total_len, conf.padding);
|
|
|
|
/* Number of padding bytes to add */
|
|
conf.padding = padded_len - total_len;
|
|
|
|
/* Fixup payload_len to include padding bytes */
|
|
payload_len += conf.padding;
|
|
|
|
/* Prepare the header */
|
|
struct spkg_hdr header = {
|
|
.marker = SPKG_HEADER_MARKER,
|
|
.version = conf.version,
|
|
.ecc = (conf.ecc_enable << 5) | (conf.ecc_block_size << 1),
|
|
.ecc_scheme = conf.ecc_scheme,
|
|
.ecc_bytes = conf.ecc_bytes,
|
|
.payload_length = cpu_to_le32(payload_len << 8),
|
|
.load_address = cpu_to_le32(params->addr),
|
|
.execution_offset = cpu_to_le32(params->ep - params->addr),
|
|
};
|
|
header.crc = crc32(0, (uint8_t *)&header,
|
|
sizeof(header) - SPKG_CRC_SIZE);
|
|
|
|
/* The SPKG contains 8 copies of the header */
|
|
out_buf = malloc(sizeof(struct spkg_file));
|
|
if (!out_buf) {
|
|
fprintf(stderr, "Error: Data filename must be set.\n");
|
|
return -ENOMEM;
|
|
}
|
|
tparams->hdr = out_buf;
|
|
tparams->header_size = sizeof(struct spkg_file);
|
|
|
|
/* Fill the SPKG with the headers */
|
|
for (int i = 0; i < SPKG_HEADER_COUNT; i++)
|
|
memcpy(&out_buf->header[i], &header, sizeof(header));
|
|
|
|
/* Extra bytes to allocate in the output file */
|
|
return conf.blp_len + conf.padding + 4;
|
|
}
|
|
|
|
static void spkgimage_set_header(void *ptr, struct stat *sbuf, int ifd,
|
|
struct image_tool_params *params)
|
|
{
|
|
uint8_t *payload = ptr + SPKG_HEADER_SIZE * SPKG_HEADER_COUNT;
|
|
uint8_t *file_end = payload + conf.blp_len + params->orig_file_size;
|
|
uint8_t *crc_buf = file_end + conf.padding;
|
|
uint32_t crc;
|
|
|
|
/* Make room for the Dummy BLp header */
|
|
memmove(payload + conf.blp_len, payload, params->orig_file_size);
|
|
|
|
/* Fill the SPKG with the Dummy BLp */
|
|
memset(payload, 0x88, conf.blp_len);
|
|
|
|
/*
|
|
* mkimage copy_file() pads the input file with zeros.
|
|
* Replace those zeros with flash friendly one bits.
|
|
* The original version skipped the first 4 bytes,
|
|
* probably an oversight, but for consistency we
|
|
* keep the same behaviour.
|
|
*/
|
|
if (conf.padding >= 4)
|
|
memset(file_end + 4, 0xff, conf.padding - 4);
|
|
|
|
/* Add Payload CRC */
|
|
crc = crc32(0, payload, crc_buf - payload);
|
|
crc_buf[0] = crc;
|
|
crc_buf[1] = crc >> 8;
|
|
crc_buf[2] = crc >> 16;
|
|
crc_buf[3] = crc >> 24;
|
|
}
|
|
|
|
static int spkgimage_check_image_types(uint8_t type)
|
|
{
|
|
return type == IH_TYPE_RENESAS_SPKG ? 0 : -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* spkgimage type parameter definition
|
|
*/
|
|
U_BOOT_IMAGE_TYPE(
|
|
spkgimage,
|
|
"Renesas SPKG Image",
|
|
0,
|
|
NULL,
|
|
spkgimage_check_params,
|
|
spkgimage_verify_header,
|
|
spkgimage_print_header,
|
|
spkgimage_set_header,
|
|
NULL,
|
|
spkgimage_check_image_types,
|
|
NULL,
|
|
spkgimage_vrec_header
|
|
);
|