mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-19 11:18:28 +00:00
14cfc4f373
Connect FPGA version with appropriate operations to remove huge switch-cases for every FPGA family. Tested on Zynq. Spartan2/Spartan3/Virtex2 just compile test. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
455 lines
12 KiB
C
455 lines
12 KiB
C
/*
|
|
* (C) Copyright 2002
|
|
* Rich Ireland, Enterasys Networks, rireland@enterasys.com.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h> /* core U-Boot definitions */
|
|
#include <spartan2.h> /* Spartan-II device family */
|
|
|
|
/* Define FPGA_DEBUG to get debug printf's */
|
|
#ifdef FPGA_DEBUG
|
|
#define PRINTF(fmt,args...) printf (fmt ,##args)
|
|
#else
|
|
#define PRINTF(fmt,args...)
|
|
#endif
|
|
|
|
#undef CONFIG_SYS_FPGA_CHECK_BUSY
|
|
#undef CONFIG_SYS_FPGA_PROG_FEEDBACK
|
|
|
|
/* Note: The assumption is that we cannot possibly run fast enough to
|
|
* overrun the device (the Slave Parallel mode can free run at 50MHz).
|
|
* If there is a need to operate slower, define CONFIG_FPGA_DELAY in
|
|
* the board config file to slow things down.
|
|
*/
|
|
#ifndef CONFIG_FPGA_DELAY
|
|
#define CONFIG_FPGA_DELAY()
|
|
#endif
|
|
|
|
#ifndef CONFIG_SYS_FPGA_WAIT
|
|
#define CONFIG_SYS_FPGA_WAIT CONFIG_SYS_HZ/100 /* 10 ms */
|
|
#endif
|
|
|
|
static int spartan2_sp_load(xilinx_desc *desc, const void *buf, size_t bsize);
|
|
static int spartan2_sp_dump(xilinx_desc *desc, const void *buf, size_t bsize);
|
|
/* static int spartan2_sp_info(xilinx_desc *desc ); */
|
|
|
|
static int spartan2_ss_load(xilinx_desc *desc, const void *buf, size_t bsize);
|
|
static int spartan2_ss_dump(xilinx_desc *desc, const void *buf, size_t bsize);
|
|
/* static int spartan2_ss_info(xilinx_desc *desc ); */
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
/* Spartan-II Generic Implementation */
|
|
static int spartan2_load(xilinx_desc *desc, const void *buf, size_t bsize)
|
|
{
|
|
int ret_val = FPGA_FAIL;
|
|
|
|
switch (desc->iface) {
|
|
case slave_serial:
|
|
PRINTF ("%s: Launching Slave Serial Load\n", __FUNCTION__);
|
|
ret_val = spartan2_ss_load(desc, buf, bsize);
|
|
break;
|
|
|
|
case slave_parallel:
|
|
PRINTF ("%s: Launching Slave Parallel Load\n", __FUNCTION__);
|
|
ret_val = spartan2_sp_load(desc, buf, bsize);
|
|
break;
|
|
|
|
default:
|
|
printf ("%s: Unsupported interface type, %d\n",
|
|
__FUNCTION__, desc->iface);
|
|
}
|
|
|
|
return ret_val;
|
|
}
|
|
|
|
static int spartan2_dump(xilinx_desc *desc, const void *buf, size_t bsize)
|
|
{
|
|
int ret_val = FPGA_FAIL;
|
|
|
|
switch (desc->iface) {
|
|
case slave_serial:
|
|
PRINTF ("%s: Launching Slave Serial Dump\n", __FUNCTION__);
|
|
ret_val = spartan2_ss_dump(desc, buf, bsize);
|
|
break;
|
|
|
|
case slave_parallel:
|
|
PRINTF ("%s: Launching Slave Parallel Dump\n", __FUNCTION__);
|
|
ret_val = spartan2_sp_dump(desc, buf, bsize);
|
|
break;
|
|
|
|
default:
|
|
printf ("%s: Unsupported interface type, %d\n",
|
|
__FUNCTION__, desc->iface);
|
|
}
|
|
|
|
return ret_val;
|
|
}
|
|
|
|
static int spartan2_info(xilinx_desc *desc)
|
|
{
|
|
return FPGA_SUCCESS;
|
|
}
|
|
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
/* Spartan-II Slave Parallel Generic Implementation */
|
|
|
|
static int spartan2_sp_load(xilinx_desc *desc, const void *buf, size_t bsize)
|
|
{
|
|
int ret_val = FPGA_FAIL; /* assume the worst */
|
|
xilinx_spartan2_slave_parallel_fns *fn = desc->iface_fns;
|
|
|
|
PRINTF ("%s: start with interface functions @ 0x%p\n",
|
|
__FUNCTION__, fn);
|
|
|
|
if (fn) {
|
|
size_t bytecount = 0;
|
|
unsigned char *data = (unsigned char *) buf;
|
|
int cookie = desc->cookie; /* make a local copy */
|
|
unsigned long ts; /* timestamp */
|
|
|
|
PRINTF ("%s: Function Table:\n"
|
|
"ptr:\t0x%p\n"
|
|
"struct: 0x%p\n"
|
|
"pre: 0x%p\n"
|
|
"pgm:\t0x%p\n"
|
|
"init:\t0x%p\n"
|
|
"err:\t0x%p\n"
|
|
"clk:\t0x%p\n"
|
|
"cs:\t0x%p\n"
|
|
"wr:\t0x%p\n"
|
|
"read data:\t0x%p\n"
|
|
"write data:\t0x%p\n"
|
|
"busy:\t0x%p\n"
|
|
"abort:\t0x%p\n",
|
|
"post:\t0x%p\n\n",
|
|
__FUNCTION__, &fn, fn, fn->pre, fn->pgm, fn->init, fn->err,
|
|
fn->clk, fn->cs, fn->wr, fn->rdata, fn->wdata, fn->busy,
|
|
fn->abort, fn->post);
|
|
|
|
/*
|
|
* This code is designed to emulate the "Express Style"
|
|
* Continuous Data Loading in Slave Parallel Mode for
|
|
* the Spartan-II Family.
|
|
*/
|
|
#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
|
|
printf ("Loading FPGA Device %d...\n", cookie);
|
|
#endif
|
|
/*
|
|
* Run the pre configuration function if there is one.
|
|
*/
|
|
if (*fn->pre) {
|
|
(*fn->pre) (cookie);
|
|
}
|
|
|
|
/* Establish the initial state */
|
|
(*fn->pgm) (true, true, cookie); /* Assert the program, commit */
|
|
|
|
/* Get ready for the burn */
|
|
CONFIG_FPGA_DELAY ();
|
|
(*fn->pgm) (false, true, cookie); /* Deassert the program, commit */
|
|
|
|
ts = get_timer (0); /* get current time */
|
|
/* Now wait for INIT and BUSY to go high */
|
|
do {
|
|
CONFIG_FPGA_DELAY ();
|
|
if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */
|
|
puts ("** Timeout waiting for INIT to clear.\n");
|
|
(*fn->abort) (cookie); /* abort the burn */
|
|
return FPGA_FAIL;
|
|
}
|
|
} while ((*fn->init) (cookie) && (*fn->busy) (cookie));
|
|
|
|
(*fn->wr) (true, true, cookie); /* Assert write, commit */
|
|
(*fn->cs) (true, true, cookie); /* Assert chip select, commit */
|
|
(*fn->clk) (true, true, cookie); /* Assert the clock pin */
|
|
|
|
/* Load the data */
|
|
while (bytecount < bsize) {
|
|
/* XXX - do we check for an Ctrl-C press in here ??? */
|
|
/* XXX - Check the error bit? */
|
|
|
|
(*fn->wdata) (data[bytecount++], true, cookie); /* write the data */
|
|
CONFIG_FPGA_DELAY ();
|
|
(*fn->clk) (false, true, cookie); /* Deassert the clock pin */
|
|
CONFIG_FPGA_DELAY ();
|
|
(*fn->clk) (true, true, cookie); /* Assert the clock pin */
|
|
|
|
#ifdef CONFIG_SYS_FPGA_CHECK_BUSY
|
|
ts = get_timer (0); /* get current time */
|
|
while ((*fn->busy) (cookie)) {
|
|
/* XXX - we should have a check in here somewhere to
|
|
* make sure we aren't busy forever... */
|
|
|
|
CONFIG_FPGA_DELAY ();
|
|
(*fn->clk) (false, true, cookie); /* Deassert the clock pin */
|
|
CONFIG_FPGA_DELAY ();
|
|
(*fn->clk) (true, true, cookie); /* Assert the clock pin */
|
|
|
|
if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */
|
|
puts ("** Timeout waiting for BUSY to clear.\n");
|
|
(*fn->abort) (cookie); /* abort the burn */
|
|
return FPGA_FAIL;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
|
|
if (bytecount % (bsize / 40) == 0)
|
|
putc ('.'); /* let them know we are alive */
|
|
#endif
|
|
}
|
|
|
|
CONFIG_FPGA_DELAY ();
|
|
(*fn->cs) (false, true, cookie); /* Deassert the chip select */
|
|
(*fn->wr) (false, true, cookie); /* Deassert the write pin */
|
|
|
|
#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
|
|
putc ('\n'); /* terminate the dotted line */
|
|
#endif
|
|
|
|
/* now check for done signal */
|
|
ts = get_timer (0); /* get current time */
|
|
ret_val = FPGA_SUCCESS;
|
|
while ((*fn->done) (cookie) == FPGA_FAIL) {
|
|
|
|
CONFIG_FPGA_DELAY ();
|
|
(*fn->clk) (false, true, cookie); /* Deassert the clock pin */
|
|
CONFIG_FPGA_DELAY ();
|
|
(*fn->clk) (true, true, cookie); /* Assert the clock pin */
|
|
|
|
if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */
|
|
puts ("** Timeout waiting for DONE to clear.\n");
|
|
(*fn->abort) (cookie); /* abort the burn */
|
|
ret_val = FPGA_FAIL;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Run the post configuration function if there is one.
|
|
*/
|
|
if (*fn->post)
|
|
(*fn->post) (cookie);
|
|
|
|
#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
|
|
if (ret_val == FPGA_SUCCESS)
|
|
puts ("Done.\n");
|
|
else
|
|
puts ("Fail.\n");
|
|
#endif
|
|
|
|
} else {
|
|
printf ("%s: NULL Interface function table!\n", __FUNCTION__);
|
|
}
|
|
|
|
return ret_val;
|
|
}
|
|
|
|
static int spartan2_sp_dump(xilinx_desc *desc, const void *buf, size_t bsize)
|
|
{
|
|
int ret_val = FPGA_FAIL; /* assume the worst */
|
|
xilinx_spartan2_slave_parallel_fns *fn = desc->iface_fns;
|
|
|
|
if (fn) {
|
|
unsigned char *data = (unsigned char *) buf;
|
|
size_t bytecount = 0;
|
|
int cookie = desc->cookie; /* make a local copy */
|
|
|
|
printf ("Starting Dump of FPGA Device %d...\n", cookie);
|
|
|
|
(*fn->cs) (true, true, cookie); /* Assert chip select, commit */
|
|
(*fn->clk) (true, true, cookie); /* Assert the clock pin */
|
|
|
|
/* dump the data */
|
|
while (bytecount < bsize) {
|
|
/* XXX - do we check for an Ctrl-C press in here ??? */
|
|
|
|
(*fn->clk) (false, true, cookie); /* Deassert the clock pin */
|
|
(*fn->clk) (true, true, cookie); /* Assert the clock pin */
|
|
(*fn->rdata) (&(data[bytecount++]), cookie); /* read the data */
|
|
#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
|
|
if (bytecount % (bsize / 40) == 0)
|
|
putc ('.'); /* let them know we are alive */
|
|
#endif
|
|
}
|
|
|
|
(*fn->cs) (false, false, cookie); /* Deassert the chip select */
|
|
(*fn->clk) (false, true, cookie); /* Deassert the clock pin */
|
|
(*fn->clk) (true, true, cookie); /* Assert the clock pin */
|
|
|
|
#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
|
|
putc ('\n'); /* terminate the dotted line */
|
|
#endif
|
|
puts ("Done.\n");
|
|
|
|
/* XXX - checksum the data? */
|
|
} else {
|
|
printf ("%s: NULL Interface function table!\n", __FUNCTION__);
|
|
}
|
|
|
|
return ret_val;
|
|
}
|
|
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static int spartan2_ss_load(xilinx_desc *desc, const void *buf, size_t bsize)
|
|
{
|
|
int ret_val = FPGA_FAIL; /* assume the worst */
|
|
xilinx_spartan2_slave_serial_fns *fn = desc->iface_fns;
|
|
int i;
|
|
unsigned char val;
|
|
|
|
PRINTF ("%s: start with interface functions @ 0x%p\n",
|
|
__FUNCTION__, fn);
|
|
|
|
if (fn) {
|
|
size_t bytecount = 0;
|
|
unsigned char *data = (unsigned char *) buf;
|
|
int cookie = desc->cookie; /* make a local copy */
|
|
unsigned long ts; /* timestamp */
|
|
|
|
PRINTF ("%s: Function Table:\n"
|
|
"ptr:\t0x%p\n"
|
|
"struct: 0x%p\n"
|
|
"pgm:\t0x%p\n"
|
|
"init:\t0x%p\n"
|
|
"clk:\t0x%p\n"
|
|
"wr:\t0x%p\n"
|
|
"done:\t0x%p\n\n",
|
|
__FUNCTION__, &fn, fn, fn->pgm, fn->init,
|
|
fn->clk, fn->wr, fn->done);
|
|
#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
|
|
printf ("Loading FPGA Device %d...\n", cookie);
|
|
#endif
|
|
|
|
/*
|
|
* Run the pre configuration function if there is one.
|
|
*/
|
|
if (*fn->pre) {
|
|
(*fn->pre) (cookie);
|
|
}
|
|
|
|
/* Establish the initial state */
|
|
(*fn->pgm) (true, true, cookie); /* Assert the program, commit */
|
|
|
|
/* Wait for INIT state (init low) */
|
|
ts = get_timer (0); /* get current time */
|
|
do {
|
|
CONFIG_FPGA_DELAY ();
|
|
if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */
|
|
puts ("** Timeout waiting for INIT to start.\n");
|
|
return FPGA_FAIL;
|
|
}
|
|
} while (!(*fn->init) (cookie));
|
|
|
|
/* Get ready for the burn */
|
|
CONFIG_FPGA_DELAY ();
|
|
(*fn->pgm) (false, true, cookie); /* Deassert the program, commit */
|
|
|
|
ts = get_timer (0); /* get current time */
|
|
/* Now wait for INIT to go high */
|
|
do {
|
|
CONFIG_FPGA_DELAY ();
|
|
if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */
|
|
puts ("** Timeout waiting for INIT to clear.\n");
|
|
return FPGA_FAIL;
|
|
}
|
|
} while ((*fn->init) (cookie));
|
|
|
|
/* Load the data */
|
|
while (bytecount < bsize) {
|
|
|
|
/* Xilinx detects an error if INIT goes low (active)
|
|
while DONE is low (inactive) */
|
|
if ((*fn->done) (cookie) == 0 && (*fn->init) (cookie)) {
|
|
puts ("** CRC error during FPGA load.\n");
|
|
return (FPGA_FAIL);
|
|
}
|
|
val = data [bytecount ++];
|
|
i = 8;
|
|
do {
|
|
/* Deassert the clock */
|
|
(*fn->clk) (false, true, cookie);
|
|
CONFIG_FPGA_DELAY ();
|
|
/* Write data */
|
|
(*fn->wr) ((val & 0x80), true, cookie);
|
|
CONFIG_FPGA_DELAY ();
|
|
/* Assert the clock */
|
|
(*fn->clk) (true, true, cookie);
|
|
CONFIG_FPGA_DELAY ();
|
|
val <<= 1;
|
|
i --;
|
|
} while (i > 0);
|
|
|
|
#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
|
|
if (bytecount % (bsize / 40) == 0)
|
|
putc ('.'); /* let them know we are alive */
|
|
#endif
|
|
}
|
|
|
|
CONFIG_FPGA_DELAY ();
|
|
|
|
#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
|
|
putc ('\n'); /* terminate the dotted line */
|
|
#endif
|
|
|
|
/* now check for done signal */
|
|
ts = get_timer (0); /* get current time */
|
|
ret_val = FPGA_SUCCESS;
|
|
(*fn->wr) (true, true, cookie);
|
|
|
|
while (! (*fn->done) (cookie)) {
|
|
|
|
CONFIG_FPGA_DELAY ();
|
|
(*fn->clk) (false, true, cookie); /* Deassert the clock pin */
|
|
CONFIG_FPGA_DELAY ();
|
|
(*fn->clk) (true, true, cookie); /* Assert the clock pin */
|
|
|
|
putc ('*');
|
|
|
|
if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */
|
|
puts ("** Timeout waiting for DONE to clear.\n");
|
|
ret_val = FPGA_FAIL;
|
|
break;
|
|
}
|
|
}
|
|
putc ('\n'); /* terminate the dotted line */
|
|
|
|
/*
|
|
* Run the post configuration function if there is one.
|
|
*/
|
|
if (*fn->post)
|
|
(*fn->post) (cookie);
|
|
|
|
#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
|
|
if (ret_val == FPGA_SUCCESS)
|
|
puts ("Done.\n");
|
|
else
|
|
puts ("Fail.\n");
|
|
#endif
|
|
|
|
} else {
|
|
printf ("%s: NULL Interface function table!\n", __FUNCTION__);
|
|
}
|
|
|
|
return ret_val;
|
|
}
|
|
|
|
static int spartan2_ss_dump(xilinx_desc *desc, const void *buf, size_t bsize)
|
|
{
|
|
/* Readback is only available through the Slave Parallel and */
|
|
/* boundary-scan interfaces. */
|
|
printf ("%s: Slave Serial Dumping is unavailable\n",
|
|
__FUNCTION__);
|
|
return FPGA_FAIL;
|
|
}
|
|
|
|
struct xilinx_fpga_op spartan2_op = {
|
|
.load = spartan2_load,
|
|
.dump = spartan2_dump,
|
|
.info = spartan2_info,
|
|
};
|