mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-17 16:53:06 +00:00
cd9b71c3f6
The *aqds* platforms have not been migrated to be able to enable CONFIG_DM_ETH with CONFIG_FMAN_ENET. Disable CONFIG_FMAN_ENET on these platforms. Cc: Mingkai Hu <mingkai.hu@nxp.com> Cc: Rajesh Bhagat <rajesh.bhagat@nxp.com> Cc: Pramod Kumar <pramod.kumar_1@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> |
||
---|---|---|
.. | ||
ddr.c | ||
ddr.h | ||
eth.c | ||
Kconfig | ||
ls1043aqds.c | ||
ls1043aqds_pbi.cfg | ||
ls1043aqds_qixis.h | ||
ls1043aqds_rcw_nand.cfg | ||
ls1043aqds_rcw_sd_ifc.cfg | ||
ls1043aqds_rcw_sd_qspi.cfg | ||
MAINTAINERS | ||
Makefile | ||
README |
Overview -------- The LS1043A Development System (QDS) is a high-performance computing, evaluation, and development platform that supports the QorIQ LS1043A LayerScape Architecture processor. The LS1043AQDS provides SW development platform for the Freescale LS1043A processor series, with a complete debugging environment. LS1043A SoC Overview -------------------- Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS1043A SoC overview. LS1043AQDS board Overview ----------------------- - SERDES Connections, 4 lanes supporting: - PCI Express - 3.0 - SGMII, SGMII 2.5 - QSGMII - SATA 3.0 - 10GBase-R - DDR Controller - 2GB 40bits (8-bits ECC) DDR4 SDRAM. Support rates of up to 1600MT/s -IFC/Local Bus - One in-socket 128 MB NOR flash 16-bit data bus - One 512 MB NAND flash with ECC support - PromJet Port - FPGA connection - USB 3.0 - Three high speed USB 3.0 ports - First USB 3.0 port configured as Host with Type-A connector - The other two USB 3.0 ports configured as OTG with micro-AB connector - SDHC port connects directly to an adapter card slot, featuring: - Optional clock feedback paths, and optional high-speed voltage translation assistance - SD slots for SD, SDHC (1x, 4x, 8x), and/or MMC - eMMC memory devices - DSPI: Onboard support for three SPI flash memory devices - 4 I2C controllers - One SATA onboard connectors - UART - Two 4-pin serial ports at up to 115.2 Kbit/s - Two DB9 D-Type connectors supporting one Serial port each - ARM JTAG support Memory map from core's view ---------------------------- Start Address End Address Description Size 0x00_0000_0000 0x00_000F_FFFF Secure Boot ROM 1MB 0x00_0100_0000 0x00_0FFF_FFFF CCSRBAR 240MB 0x00_1000_0000 0x00_1000_FFFF OCRAM0 64KB 0x00_1001_0000 0x00_1001_FFFF OCRAM1 64KB 0x00_2000_0000 0x00_20FF_FFFF DCSR 16MB 0x00_6000_0000 0x00_67FF_FFFF IFC - NOR Flash 128MB 0x00_7E80_0000 0x00_7E80_FFFF IFC - NAND Flash 64KB 0x00_7FB0_0000 0x00_7FB0_0FFF IFC - FPGA 4KB 0x00_8000_0000 0x00_FFFF_FFFF DRAM1 2GB Booting Options --------------- a) Promjet Boot b) NOR boot c) NAND boot d) SD boot e) QSPI boot