u-boot/board/compulab/cm_fx6/common.h
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

36 lines
1.2 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/
*
* Author: Nikita Kiryanov <nikita@compulab.co.il>
*/
#include <asm/arch/mx6-pins.h>
#include <asm/arch/clock.h>
#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
PAD_CTL_SRE_FAST | PAD_CTL_HYS)
#define CM_FX6_ECSPI_BUS0_CS0 IMX_GPIO_NR(2, 30)
#define CM_FX6_GREEN_LED IMX_GPIO_NR(2, 31)
#define CM_FX6_ENET_NRST IMX_GPIO_NR(2, 8)
#define CM_FX6_ENET_NRST IMX_GPIO_NR(2, 8)
#define CM_FX6_USB_HUB_RST IMX_GPIO_NR(7, 8)
#define SB_FX6_USB_OTG_PWR IMX_GPIO_NR(3, 22)
#define CM_FX6_ENET_NRST IMX_GPIO_NR(2, 8)
#define CM_FX6_USB_HUB_RST IMX_GPIO_NR(7, 8)
#define SB_FX6_USB_OTG_PWR IMX_GPIO_NR(3, 22)
#define CM_FX6_SATA_PWREN IMX_GPIO_NR(1, 28)
#define CM_FX6_SATA_VDDC_CTRL IMX_GPIO_NR(1, 30)
#define CM_FX6_SATA_LDO_EN IMX_GPIO_NR(2, 16)
#define CM_FX6_SATA_NSTANDBY1 IMX_GPIO_NR(3, 20)
#define CM_FX6_SATA_PHY_SLP IMX_GPIO_NR(3, 23)
#define CM_FX6_SATA_STBY_REQ IMX_GPIO_NR(3, 29)
#define CM_FX6_SATA_NSTANDBY2 IMX_GPIO_NR(5, 2)
#define CM_FX6_SATA_NRSTDLY IMX_GPIO_NR(6, 6)
#define CM_FX6_SATA_PWLOSS_INT IMX_GPIO_NR(6, 31)
void cm_fx6_set_usdhc_iomux(void);
void cm_fx6_set_ecspi_iomux(void);