mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-12 06:12:58 +00:00
76361af76c
J721S2 EVM used to store env on eMMC, since EVM and SK uses same defconfig and there is no eMMC on SK, we need to keep env in an interface which available on both EVM and SK. So, save env in FAT partition of MMC SD Card. Enable defconfigs relevant for storing env on FAT partition of MMC. Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
181 lines
4.7 KiB
Text
181 lines
4.7 KiB
Text
CONFIG_ARM=y
|
|
CONFIG_ARCH_K3=y
|
|
CONFIG_SYS_MALLOC_LEN=0x2000000
|
|
CONFIG_SYS_MALLOC_F_LEN=0x10000
|
|
CONFIG_SPL_GPIO=y
|
|
CONFIG_SPL_LIBCOMMON_SUPPORT=y
|
|
CONFIG_SPL_LIBGENERIC_SUPPORT=y
|
|
CONFIG_SOC_K3_J721S2=y
|
|
CONFIG_K3_EARLY_CONS=y
|
|
CONFIG_TARGET_J721S2_R5_EVM=y
|
|
CONFIG_ENV_SIZE=0x20000
|
|
CONFIG_DM_GPIO=y
|
|
CONFIG_SPL_DM_SPI=y
|
|
CONFIG_DEFAULT_DEVICE_TREE="k3-j721s2-r5-common-proc-board"
|
|
CONFIG_SPL_TEXT_BASE=0x41c00000
|
|
CONFIG_SPL_MMC=y
|
|
CONFIG_SPL_SERIAL=y
|
|
CONFIG_SPL_DRIVERS_MISC=y
|
|
CONFIG_SPL_STACK_R_ADDR=0x82000000
|
|
CONFIG_SPL_SIZE_LIMIT=0x80000
|
|
CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x4000
|
|
CONFIG_SPL_FS_FAT=y
|
|
CONFIG_SPL_LIBDISK_SUPPORT=y
|
|
CONFIG_SPL_SPI_FLASH_SUPPORT=y
|
|
CONFIG_SPL_SPI=y
|
|
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
|
|
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x41c76000
|
|
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
|
|
CONFIG_SPL_LOAD_FIT=y
|
|
CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000
|
|
CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
|
|
# CONFIG_USE_SPL_FIT_GENERATOR is not set
|
|
CONFIG_USE_BOOTCOMMAND=y
|
|
# CONFIG_DISPLAY_CPUINFO is not set
|
|
CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y
|
|
CONFIG_SPL_SIZE_LIMIT_SUBTRACT_MALLOC=y
|
|
CONFIG_SPL_MAX_SIZE=0xc0000
|
|
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
|
|
CONFIG_SPL_BSS_START_ADDR=0x41c76000
|
|
CONFIG_SPL_BSS_MAX_SIZE=0xa000
|
|
CONFIG_SPL_SYS_REPORT_STACK_F_USAGE=y
|
|
CONFIG_SPL_BOARD_INIT=y
|
|
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
|
|
CONFIG_SPL_STACK_R=y
|
|
CONFIG_SPL_SEPARATE_BSS=y
|
|
CONFIG_SYS_SPL_MALLOC=y
|
|
CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
|
|
CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x84000000
|
|
CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000
|
|
CONFIG_SPL_EARLY_BSS=y
|
|
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
|
|
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400
|
|
CONFIG_SPL_DMA=y
|
|
CONFIG_SPL_ENV_SUPPORT=y
|
|
CONFIG_SPL_FS_EXT4=y
|
|
CONFIG_SPL_I2C=y
|
|
CONFIG_SPL_DM_MAILBOX=y
|
|
CONFIG_SPL_MTD_SUPPORT=y
|
|
CONFIG_SPL_DM_SPI_FLASH=y
|
|
CONFIG_SPL_NOR_SUPPORT=y
|
|
CONFIG_SPL_DM_RESET=y
|
|
CONFIG_SPL_POWER_DOMAIN=y
|
|
CONFIG_SPL_RAM_SUPPORT=y
|
|
CONFIG_SPL_RAM_DEVICE=y
|
|
CONFIG_SPL_REMOTEPROC=y
|
|
# CONFIG_SPL_SPI_FLASH_TINY is not set
|
|
CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
|
|
CONFIG_SPL_SPI_LOAD=y
|
|
CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000
|
|
CONFIG_SPL_THERMAL=y
|
|
CONFIG_SPL_USB_GADGET=y
|
|
CONFIG_SPL_DFU=y
|
|
CONFIG_SPL_YMODEM_SUPPORT=y
|
|
CONFIG_HUSH_PARSER=y
|
|
CONFIG_SYS_MAXARGS=64
|
|
CONFIG_SYS_BOOTM_LEN=0x4000000
|
|
CONFIG_CMD_DFU=y
|
|
# CONFIG_CMD_FLASH is not set
|
|
CONFIG_CMD_GPT=y
|
|
CONFIG_CMD_MMC=y
|
|
CONFIG_CMD_REMOTEPROC=y
|
|
# CONFIG_CMD_SETEXPR is not set
|
|
CONFIG_CMD_TIME=y
|
|
CONFIG_CMD_FAT=y
|
|
CONFIG_OF_CONTROL=y
|
|
CONFIG_SPL_OF_CONTROL=y
|
|
CONFIG_SPL_MULTI_DTB_FIT=y
|
|
CONFIG_SPL_OF_LIST="k3-j721s2-r5-common-proc-board k3-am68-sk-r5-base-board"
|
|
CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y
|
|
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
|
CONFIG_ENV_OVERWRITE=y
|
|
CONFIG_SPL_DM=y
|
|
CONFIG_SPL_DM_SEQ_ALIAS=y
|
|
CONFIG_REGMAP=y
|
|
CONFIG_SPL_REGMAP=y
|
|
CONFIG_SYSCON=y
|
|
CONFIG_SPL_SYSCON=y
|
|
CONFIG_SPL_OF_TRANSLATE=y
|
|
CONFIG_CLK=y
|
|
CONFIG_SPL_CLK=y
|
|
CONFIG_SPL_CLK_CCF=y
|
|
CONFIG_SPL_CLK_K3_PLL=y
|
|
CONFIG_SPL_CLK_K3=y
|
|
CONFIG_SYS_DFU_DATA_BUF_SIZE=0x40000
|
|
CONFIG_DMA_CHANNELS=y
|
|
CONFIG_TI_K3_NAVSS_UDMA=y
|
|
CONFIG_TI_SCI_PROTOCOL=y
|
|
CONFIG_DA8XX_GPIO=y
|
|
CONFIG_DM_PCA953X=y
|
|
CONFIG_DM_I2C=y
|
|
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
|
|
CONFIG_SYS_I2C_OMAP24XX=y
|
|
CONFIG_DM_MAILBOX=y
|
|
CONFIG_K3_SEC_PROXY=y
|
|
CONFIG_FS_LOADER=y
|
|
CONFIG_SPL_FS_LOADER=y
|
|
CONFIG_SUPPORT_EMMC_BOOT=y
|
|
CONFIG_SPL_MMC_HS400_SUPPORT=y
|
|
CONFIG_MMC_SDHCI=y
|
|
CONFIG_SPL_MMC_SDHCI_ADMA=y
|
|
CONFIG_MMC_SDHCI_AM654=y
|
|
CONFIG_MTD=y
|
|
CONFIG_DM_MTD=y
|
|
CONFIG_MTD_NOR_FLASH=y
|
|
CONFIG_FLASH_SHOW_PROGRESS=0
|
|
CONFIG_CFI_FLASH=y
|
|
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
|
|
CONFIG_FLASH_CFI_MTD=y
|
|
CONFIG_SYS_FLASH_CFI=y
|
|
CONFIG_SYS_MAX_FLASH_BANKS_DETECT=y
|
|
CONFIG_DM_SPI_FLASH=y
|
|
CONFIG_SPI_FLASH_SFDP_SUPPORT=y
|
|
CONFIG_SPI_FLASH_SOFT_RESET=y
|
|
CONFIG_SPI_FLASH_SOFT_RESET_ON_BOOT=y
|
|
CONFIG_SPI_FLASH_SPANSION=y
|
|
CONFIG_SPI_FLASH_S28HX_T=y
|
|
CONFIG_SPI_FLASH_STMICRO=y
|
|
CONFIG_SPI_FLASH_MT35XU=y
|
|
CONFIG_PINCTRL=y
|
|
# CONFIG_PINCTRL_GENERIC is not set
|
|
CONFIG_SPL_PINCTRL=y
|
|
# CONFIG_SPL_PINCTRL_GENERIC is not set
|
|
CONFIG_PINCTRL_SINGLE=y
|
|
CONFIG_POWER_DOMAIN=y
|
|
CONFIG_TI_POWER_DOMAIN=y
|
|
CONFIG_K3_SYSTEM_CONTROLLER=y
|
|
CONFIG_REMOTEPROC_TI_K3_ARM64=y
|
|
CONFIG_DM_RESET=y
|
|
CONFIG_RESET_TI_SCI=y
|
|
CONFIG_DM_SERIAL=y
|
|
CONFIG_SOC_DEVICE=y
|
|
CONFIG_SOC_DEVICE_TI_K3=y
|
|
CONFIG_SOC_TI=y
|
|
CONFIG_SPI=y
|
|
CONFIG_DM_SPI=y
|
|
CONFIG_CADENCE_QSPI=y
|
|
CONFIG_HAS_CQSPI_REF_CLK=y
|
|
CONFIG_CQSPI_REF_CLK=133333333
|
|
CONFIG_SYSRESET=y
|
|
CONFIG_SPL_SYSRESET=y
|
|
CONFIG_SYSRESET_TI_SCI=y
|
|
CONFIG_DM_THERMAL=y
|
|
CONFIG_TIMER=y
|
|
CONFIG_SPL_TIMER=y
|
|
CONFIG_OMAP_TIMER=y
|
|
CONFIG_USB=y
|
|
CONFIG_DM_USB_GADGET=y
|
|
CONFIG_SPL_DM_USB_GADGET=y
|
|
CONFIG_USB_CDNS3=y
|
|
CONFIG_USB_CDNS3_GADGET=y
|
|
CONFIG_SPL_USB_CDNS3_GADGET=y
|
|
CONFIG_USB_GADGET=y
|
|
CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
|
|
CONFIG_USB_GADGET_VENDOR_NUM=0x0451
|
|
CONFIG_USB_GADGET_PRODUCT_NUM=0x6168
|
|
CONFIG_USB_GADGET_DOWNLOAD=y
|
|
CONFIG_FS_EXT4=y
|
|
CONFIG_FS_FAT_MAX_CLUSTSIZE=16384
|
|
CONFIG_PANIC_HANG=y
|
|
CONFIG_LIB_RATIONAL=y
|
|
CONFIG_SPL_LIB_RATIONAL=y
|