mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-01 08:59:33 +00:00
d9efd47c03
Define two structure mx6sx_iomux_ddr_regs and mx6sx_iomux_grp_regs. Add a new function mx6sx_dram_iocfg to configure dram io. Since mx6sx only have one channel mmdc0, define a new empty macro MMDC1 to replace mmdc1->entry=value for mx6sx. And to other mx6 soc, MMDC1 effects as "mmdc1->entry=value". Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
354 lines
8.2 KiB
C
354 lines
8.2 KiB
C
/*
|
|
* Copyright (C) 2013 Boundary Devices Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
#ifndef __ASM_ARCH_MX6_DDR_H__
|
|
#define __ASM_ARCH_MX6_DDR_H__
|
|
|
|
#ifndef CONFIG_SPL_BUILD
|
|
#ifdef CONFIG_MX6Q
|
|
#include "mx6q-ddr.h"
|
|
#else
|
|
#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
|
|
#include "mx6dl-ddr.h"
|
|
#else
|
|
#ifdef CONFIG_MX6SX
|
|
#include "mx6sx-ddr.h"
|
|
#else
|
|
#error "Please select cpu"
|
|
#endif /* CONFIG_MX6SX */
|
|
#endif /* CONFIG_MX6DL or CONFIG_MX6S */
|
|
#endif /* CONFIG_MX6Q */
|
|
#else
|
|
|
|
/* MMDC P0/P1 Registers */
|
|
struct mmdc_p_regs {
|
|
u32 mdctl;
|
|
u32 mdpdc;
|
|
u32 mdotc;
|
|
u32 mdcfg0;
|
|
u32 mdcfg1;
|
|
u32 mdcfg2;
|
|
u32 mdmisc;
|
|
u32 mdscr;
|
|
u32 mdref;
|
|
u32 res1[2];
|
|
u32 mdrwd;
|
|
u32 mdor;
|
|
u32 res2[3];
|
|
u32 mdasp;
|
|
u32 res3[240];
|
|
u32 mapsr;
|
|
u32 res4[254];
|
|
u32 mpzqhwctrl;
|
|
u32 res5[2];
|
|
u32 mpwldectrl0;
|
|
u32 mpwldectrl1;
|
|
u32 res6;
|
|
u32 mpodtctrl;
|
|
u32 mprddqby0dl;
|
|
u32 mprddqby1dl;
|
|
u32 mprddqby2dl;
|
|
u32 mprddqby3dl;
|
|
u32 res7[4];
|
|
u32 mpdgctrl0;
|
|
u32 mpdgctrl1;
|
|
u32 res8;
|
|
u32 mprddlctl;
|
|
u32 res9;
|
|
u32 mpwrdlctl;
|
|
u32 res10[25];
|
|
u32 mpmur0;
|
|
};
|
|
|
|
#define MX6SX_IOM_DDR_BASE 0x020e0200
|
|
struct mx6sx_iomux_ddr_regs {
|
|
u32 res1[59];
|
|
u32 dram_dqm0;
|
|
u32 dram_dqm1;
|
|
u32 dram_dqm2;
|
|
u32 dram_dqm3;
|
|
u32 dram_ras;
|
|
u32 dram_cas;
|
|
u32 res2[2];
|
|
u32 dram_sdwe_b;
|
|
u32 dram_odt0;
|
|
u32 dram_odt1;
|
|
u32 dram_sdba0;
|
|
u32 dram_sdba1;
|
|
u32 dram_sdba2;
|
|
u32 dram_sdcke0;
|
|
u32 dram_sdcke1;
|
|
u32 dram_sdclk_0;
|
|
u32 dram_sdqs0;
|
|
u32 dram_sdqs1;
|
|
u32 dram_sdqs2;
|
|
u32 dram_sdqs3;
|
|
u32 dram_reset;
|
|
};
|
|
|
|
#define MX6SX_IOM_GRP_BASE 0x020e0500
|
|
struct mx6sx_iomux_grp_regs {
|
|
u32 res1[61];
|
|
u32 grp_addds;
|
|
u32 grp_ddrmode_ctl;
|
|
u32 grp_ddrpke;
|
|
u32 grp_ddrpk;
|
|
u32 grp_ddrhys;
|
|
u32 grp_ddrmode;
|
|
u32 grp_b0ds;
|
|
u32 grp_b1ds;
|
|
u32 grp_ctlds;
|
|
u32 grp_ddr_type;
|
|
u32 grp_b2ds;
|
|
u32 grp_b3ds;
|
|
};
|
|
|
|
/*
|
|
* MMDC iomux registers (pinctl/padctl) - (different for IMX6DQ vs IMX6SDL)
|
|
*/
|
|
#define MX6DQ_IOM_DDR_BASE 0x020e0500
|
|
struct mx6dq_iomux_ddr_regs {
|
|
u32 res1[3];
|
|
u32 dram_sdqs5;
|
|
u32 dram_dqm5;
|
|
u32 dram_dqm4;
|
|
u32 dram_sdqs4;
|
|
u32 dram_sdqs3;
|
|
u32 dram_dqm3;
|
|
u32 dram_sdqs2;
|
|
u32 dram_dqm2;
|
|
u32 res2[16];
|
|
u32 dram_cas;
|
|
u32 res3[2];
|
|
u32 dram_ras;
|
|
u32 dram_reset;
|
|
u32 res4[2];
|
|
u32 dram_sdclk_0;
|
|
u32 dram_sdba2;
|
|
u32 dram_sdcke0;
|
|
u32 dram_sdclk_1;
|
|
u32 dram_sdcke1;
|
|
u32 dram_sdodt0;
|
|
u32 dram_sdodt1;
|
|
u32 res5;
|
|
u32 dram_sdqs0;
|
|
u32 dram_dqm0;
|
|
u32 dram_sdqs1;
|
|
u32 dram_dqm1;
|
|
u32 dram_sdqs6;
|
|
u32 dram_dqm6;
|
|
u32 dram_sdqs7;
|
|
u32 dram_dqm7;
|
|
};
|
|
|
|
#define MX6DQ_IOM_GRP_BASE 0x020e0700
|
|
struct mx6dq_iomux_grp_regs {
|
|
u32 res1[18];
|
|
u32 grp_b7ds;
|
|
u32 grp_addds;
|
|
u32 grp_ddrmode_ctl;
|
|
u32 res2;
|
|
u32 grp_ddrpke;
|
|
u32 res3[6];
|
|
u32 grp_ddrmode;
|
|
u32 res4[3];
|
|
u32 grp_b0ds;
|
|
u32 grp_b1ds;
|
|
u32 grp_ctlds;
|
|
u32 res5;
|
|
u32 grp_b2ds;
|
|
u32 grp_ddr_type;
|
|
u32 grp_b3ds;
|
|
u32 grp_b4ds;
|
|
u32 grp_b5ds;
|
|
u32 grp_b6ds;
|
|
};
|
|
|
|
#define MX6SDL_IOM_DDR_BASE 0x020e0400
|
|
struct mx6sdl_iomux_ddr_regs {
|
|
u32 res1[25];
|
|
u32 dram_cas;
|
|
u32 res2[2];
|
|
u32 dram_dqm0;
|
|
u32 dram_dqm1;
|
|
u32 dram_dqm2;
|
|
u32 dram_dqm3;
|
|
u32 dram_dqm4;
|
|
u32 dram_dqm5;
|
|
u32 dram_dqm6;
|
|
u32 dram_dqm7;
|
|
u32 dram_ras;
|
|
u32 dram_reset;
|
|
u32 res3[2];
|
|
u32 dram_sdba2;
|
|
u32 dram_sdcke0;
|
|
u32 dram_sdcke1;
|
|
u32 dram_sdclk_0;
|
|
u32 dram_sdclk_1;
|
|
u32 dram_sdodt0;
|
|
u32 dram_sdodt1;
|
|
u32 dram_sdqs0;
|
|
u32 dram_sdqs1;
|
|
u32 dram_sdqs2;
|
|
u32 dram_sdqs3;
|
|
u32 dram_sdqs4;
|
|
u32 dram_sdqs5;
|
|
u32 dram_sdqs6;
|
|
u32 dram_sdqs7;
|
|
};
|
|
|
|
#define MX6SDL_IOM_GRP_BASE 0x020e0700
|
|
struct mx6sdl_iomux_grp_regs {
|
|
u32 res1[18];
|
|
u32 grp_b7ds;
|
|
u32 grp_addds;
|
|
u32 grp_ddrmode_ctl;
|
|
u32 grp_ddrpke;
|
|
u32 res2[2];
|
|
u32 grp_ddrmode;
|
|
u32 grp_b0ds;
|
|
u32 res3;
|
|
u32 grp_ctlds;
|
|
u32 grp_b1ds;
|
|
u32 grp_ddr_type;
|
|
u32 grp_b2ds;
|
|
u32 grp_b3ds;
|
|
u32 grp_b4ds;
|
|
u32 grp_b5ds;
|
|
u32 res4;
|
|
u32 grp_b6ds;
|
|
};
|
|
|
|
/* Device Information: Varies per DDR3 part number and speed grade */
|
|
struct mx6_ddr3_cfg {
|
|
u16 mem_speed; /* ie 1600 for DDR3-1600 (800,1066,1333,1600) */
|
|
u8 density; /* chip density (Gb) (1,2,4,8) */
|
|
u8 width; /* bus width (bits) (4,8,16) */
|
|
u8 banks; /* number of banks */
|
|
u8 rowaddr; /* row address bits (11-16)*/
|
|
u8 coladdr; /* col address bits (9-12) */
|
|
u8 pagesz; /* page size (K) (1-2) */
|
|
u16 trcd; /* tRCD=tRP=CL (ns*100) */
|
|
u16 trcmin; /* tRC min (ns*100) */
|
|
u16 trasmin; /* tRAS min (ns*100) */
|
|
u8 SRT; /* self-refresh temperature: 0=normal, 1=extended */
|
|
};
|
|
|
|
/* System Information: Varies per board design, layout, and term choices */
|
|
struct mx6_ddr_sysinfo {
|
|
u8 dsize; /* size of bus (in dwords: 0=16bit,1=32bit,2=64bit) */
|
|
u8 cs_density; /* density per chip select (Gb) */
|
|
u8 ncs; /* number chip selects used (1|2) */
|
|
char cs1_mirror;/* enable address mirror (0|1) */
|
|
char bi_on; /* Bank interleaving enable */
|
|
u8 rtt_nom; /* Rtt_Nom (DDR3_RTT_*) */
|
|
u8 rtt_wr; /* Rtt_Wr (DDR3_RTT_*) */
|
|
u8 ralat; /* Read Additional Latency (0-7) */
|
|
u8 walat; /* Write Additional Latency (0-3) */
|
|
u8 mif3_mode; /* Command prediction working mode */
|
|
u8 rst_to_cke; /* Time from SDE enable to CKE rise */
|
|
u8 sde_to_rst; /* Time from SDE enable until DDR reset# is high */
|
|
};
|
|
|
|
/*
|
|
* Board specific calibration:
|
|
* This includes write leveling calibration values as well as DQS gating
|
|
* and read/write delays. These values are board/layout/device specific.
|
|
* Freescale recommends using the i.MX6 DDR Stress Test Tool V1.0.2
|
|
* (DOC-96412) to determine these values over a range of boards and
|
|
* temperatures.
|
|
*/
|
|
struct mx6_mmdc_calibration {
|
|
/* write leveling calibration */
|
|
u32 p0_mpwldectrl0;
|
|
u32 p0_mpwldectrl1;
|
|
u32 p1_mpwldectrl0;
|
|
u32 p1_mpwldectrl1;
|
|
/* read DQS gating */
|
|
u32 p0_mpdgctrl0;
|
|
u32 p0_mpdgctrl1;
|
|
u32 p1_mpdgctrl0;
|
|
u32 p1_mpdgctrl1;
|
|
/* read delay */
|
|
u32 p0_mprddlctl;
|
|
u32 p1_mprddlctl;
|
|
/* write delay */
|
|
u32 p0_mpwrdlctl;
|
|
u32 p1_mpwrdlctl;
|
|
};
|
|
|
|
/* configure iomux (pinctl/padctl) */
|
|
void mx6dq_dram_iocfg(unsigned width,
|
|
const struct mx6dq_iomux_ddr_regs *,
|
|
const struct mx6dq_iomux_grp_regs *);
|
|
void mx6sdl_dram_iocfg(unsigned width,
|
|
const struct mx6sdl_iomux_ddr_regs *,
|
|
const struct mx6sdl_iomux_grp_regs *);
|
|
void mx6sx_dram_iocfg(unsigned width,
|
|
const struct mx6sx_iomux_ddr_regs *,
|
|
const struct mx6sx_iomux_grp_regs *);
|
|
|
|
/* configure mx6 mmdc registers */
|
|
void mx6_dram_cfg(const struct mx6_ddr_sysinfo *,
|
|
const struct mx6_mmdc_calibration *,
|
|
const struct mx6_ddr3_cfg *);
|
|
|
|
#endif /* CONFIG_SPL_BUILD */
|
|
|
|
#define MX6_MMDC_P0_MDCTL 0x021b0000
|
|
#define MX6_MMDC_P0_MDPDC 0x021b0004
|
|
#define MX6_MMDC_P0_MDOTC 0x021b0008
|
|
#define MX6_MMDC_P0_MDCFG0 0x021b000c
|
|
#define MX6_MMDC_P0_MDCFG1 0x021b0010
|
|
#define MX6_MMDC_P0_MDCFG2 0x021b0014
|
|
#define MX6_MMDC_P0_MDMISC 0x021b0018
|
|
#define MX6_MMDC_P0_MDSCR 0x021b001c
|
|
#define MX6_MMDC_P0_MDREF 0x021b0020
|
|
#define MX6_MMDC_P0_MDRWD 0x021b002c
|
|
#define MX6_MMDC_P0_MDOR 0x021b0030
|
|
#define MX6_MMDC_P0_MDASP 0x021b0040
|
|
#define MX6_MMDC_P0_MAPSR 0x021b0404
|
|
#define MX6_MMDC_P0_MPZQHWCTRL 0x021b0800
|
|
#define MX6_MMDC_P0_MPWLDECTRL0 0x021b080c
|
|
#define MX6_MMDC_P0_MPWLDECTRL1 0x021b0810
|
|
#define MX6_MMDC_P0_MPODTCTRL 0x021b0818
|
|
#define MX6_MMDC_P0_MPRDDQBY0DL 0x021b081c
|
|
#define MX6_MMDC_P0_MPRDDQBY1DL 0x021b0820
|
|
#define MX6_MMDC_P0_MPRDDQBY2DL 0x021b0824
|
|
#define MX6_MMDC_P0_MPRDDQBY3DL 0x021b0828
|
|
#define MX6_MMDC_P0_MPDGCTRL0 0x021b083c
|
|
#define MX6_MMDC_P0_MPDGCTRL1 0x021b0840
|
|
#define MX6_MMDC_P0_MPRDDLCTL 0x021b0848
|
|
#define MX6_MMDC_P0_MPWRDLCTL 0x021b0850
|
|
#define MX6_MMDC_P0_MPMUR0 0x021b08b8
|
|
|
|
#define MX6_MMDC_P1_MDCTL 0x021b4000
|
|
#define MX6_MMDC_P1_MDPDC 0x021b4004
|
|
#define MX6_MMDC_P1_MDOTC 0x021b4008
|
|
#define MX6_MMDC_P1_MDCFG0 0x021b400c
|
|
#define MX6_MMDC_P1_MDCFG1 0x021b4010
|
|
#define MX6_MMDC_P1_MDCFG2 0x021b4014
|
|
#define MX6_MMDC_P1_MDMISC 0x021b4018
|
|
#define MX6_MMDC_P1_MDSCR 0x021b401c
|
|
#define MX6_MMDC_P1_MDREF 0x021b4020
|
|
#define MX6_MMDC_P1_MDRWD 0x021b402c
|
|
#define MX6_MMDC_P1_MDOR 0x021b4030
|
|
#define MX6_MMDC_P1_MDASP 0x021b4040
|
|
#define MX6_MMDC_P1_MAPSR 0x021b4404
|
|
#define MX6_MMDC_P1_MPZQHWCTRL 0x021b4800
|
|
#define MX6_MMDC_P1_MPWLDECTRL0 0x021b480c
|
|
#define MX6_MMDC_P1_MPWLDECTRL1 0x021b4810
|
|
#define MX6_MMDC_P1_MPODTCTRL 0x021b4818
|
|
#define MX6_MMDC_P1_MPRDDQBY0DL 0x021b481c
|
|
#define MX6_MMDC_P1_MPRDDQBY1DL 0x021b4820
|
|
#define MX6_MMDC_P1_MPRDDQBY2DL 0x021b4824
|
|
#define MX6_MMDC_P1_MPRDDQBY3DL 0x021b4828
|
|
#define MX6_MMDC_P1_MPDGCTRL0 0x021b483c
|
|
#define MX6_MMDC_P1_MPDGCTRL1 0x021b4840
|
|
#define MX6_MMDC_P1_MPRDDLCTL 0x021b4848
|
|
#define MX6_MMDC_P1_MPWRDLCTL 0x021b4850
|
|
#define MX6_MMDC_P1_MPMUR0 0x021b48b8
|
|
|
|
#endif /*__ASM_ARCH_MX6_DDR_H__ */
|