mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-10 23:24:38 +00:00
401d1c4f5d
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> |
||
|---|---|---|
| .. | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| mx6q_4x_mt41j128.cfg | ||
| ot1200.c | ||
| ot1200_spl.c | ||
| README | ||
U-Boot for the Bachmann electronic GmbH OT1200 devices There are two different versions of the base board, which differ in the way ethernet is done. The variant detection is done during runtime based on the address of the found phy. - "mr" variant FEC is connected directly to an ethernet switch (KSZ8895). The ethernet port is always up and auto-negotiation is not possible. - normal variant FEC is connected to a normal phy and auto-negotiation is possible. The variant name is part of the dtb file name loaded by u-boot. This make is possible to boot the linux kernel and make use variant specific devicetree (fixed-phy link). In order to support different display resoltuions/sizes the OT1200 devices are making use of EDID data stored in an i2c EEPROM.