u-boot/arch/arm/dts/zynq-zturn-common.dtsi
Alexandre GRIVEAUX bd897a0789 ARM: zynq: Add Z-turn board V5
Adding Z-turn board V5 to resolve the change between:

"Z-TURNBOARD_schematic.pdf" schematics state version 1 to 4 has Atheros AR8035
"Z-Turn_Board_sch_V15_20160303.pdf" schematics state version 5 has Micrel KSZ9031

At this time the S25FL128SAGNFI003 doesn't work because of bug:

*** Warning - spi_flash_probe_bus_cs() failed, using default environment

zynq-zturn was checked on V5 board, same error.

Maybe Z-turn board have the same problem (board with W25Q128BVFIG).

Signed-off-by: Alexandre GRIVEAUX <agriveaux@deutnet.info>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-10-27 08:01:36 +01:00

120 lines
1.7 KiB
Text

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2015 Andrea Merello <adnrea.merello@gmail.com>
* Copyright (C) 2017 Alexander Graf <agraf@suse.de>
*
* Based on zynq-zed.dts which is:
* Copyright (C) 2011 - 2014 Xilinx
* Copyright (C) 2012 National Instruments Corp.
*
*/
/dts-v1/;
/include/ "zynq-7000.dtsi"
/ {
compatible = "xlnx,zynq-7000";
aliases {
ethernet0 = &gem0;
serial0 = &uart1;
serial1 = &uart0;
mmc0 = &sdhci0;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x40000000>;
};
chosen {
stdout-path = "serial0:115200n8";
};
gpio-leds {
compatible = "gpio-leds";
usr-led1 {
label = "usr-led1";
gpios = <&gpio0 0x0 0x1>;
default-state = "off";
};
usr-led2 {
label = "usr-led2";
gpios = <&gpio0 0x9 0x1>;
default-state = "off";
};
};
gpio-keys {
compatible = "gpio-keys";
autorepeat;
K1 {
label = "K1";
gpios = <&gpio0 0x32 0x1>;
linux,code = <0x66>;
wakeup-source;
autorepeat;
};
};
};
&clkc {
ps-clk-frequency = <33333333>;
};
&qspi {
u-boot,dm-pre-reloc;
status = "okay";
};
&gem0 {
status = "okay";
phy-mode = "rgmii-id";
phy-handle = <&ethernet_phy>;
ethernet_phy: ethernet-phy@0 {
};
};
&sdhci0 {
u-boot,dm-pre-reloc;
status = "okay";
};
&uart0 {
u-boot,dm-pre-reloc;
status = "okay";
};
&uart1 {
u-boot,dm-pre-reloc;
status = "okay";
};
&usb0 {
status = "okay";
dr_mode = "host";
};
&can0 {
status = "okay";
};
&i2c0 {
status = "okay";
clock-frequency = <400000>;
stlm75@49 {
status = "okay";
compatible = "lm75";
reg = <0x49>;
};
accelerometer@53 {
compatible = "adi,adxl345", "adxl345", "adi,adxl34x", "adxl34x";
reg = <0x53>;
interrupt-parent = <&intc>;
interrupts = <0x0 0x1e 0x4>;
};
};