u-boot/arch/arm/dts/tegra30-apalis.dts
Stephen Warren ce2f2d2ae7 ARM: tegra: pull Tegra30 SoC DT from Linux v4.7
The primary benefit of this change is that it adds all missing clocks and
resets properties to peripherals. This will allow peripheral drivers to
migrate to the standard clock and reset APIs in the future.

Main changes:
* Modification of PCIe memory region addresses. The HW memory layout is
  programmable, so this should work fine, and Beaver PCIe was tested
  without issue.
* Removal of pcie_xclk from the PCIe node and clock binding header. This
  clock doesn't exist and isn't used; only a reset with this ID exists.
* Conversion of SPI nodes to standard DMA bindings. U-Boot doesn't use
  DMA so isn't affected.
* Split of EHCI and USB PHY nodes. The EHCI nodes continue to contain all
  information required by U-Boot, so U-Boot is not affected.
* Changed the phy_type value for the second USB port. This required board
  DTs to be updated to keep the same configuration.
* Boards need to define the clk32k_in clock that feeds the Tegra PMC.
* Addition of tegra30-mc.h since tegra30.dtsi now includes it.
* Conversion of many magic numbers to named defines.
* Addition of many nodes not used by U-Boot.
* Node sort order fixes.

Remaining deltas relative to the Linux DT:
* None.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-09-27 09:11:02 -07:00

332 lines
6.8 KiB
Text

/dts-v1/;
#include "tegra30.dtsi"
/ {
model = "Toradex Apalis T30";
compatible = "toradex,apalis_t30", "nvidia,tegra30";
chosen {
stdout-path = &uarta;
};
aliases {
i2c0 = "/i2c@7000d000";
i2c1 = "/i2c@7000c000";
i2c2 = "/i2c@7000c500";
i2c3 = "/i2c@7000c700";
mmc0 = "/sdhci@78000600";
mmc1 = "/sdhci@78000400";
mmc2 = "/sdhci@78000000";
spi0 = "/spi@7000d400";
spi1 = "/spi@7000dc00";
spi2 = "/spi@7000de00";
spi3 = "/spi@7000da00";
usb0 = "/usb@7d000000";
usb1 = "/usb@7d004000";
usb2 = "/usb@7d008000";
};
memory {
device_type = "memory";
reg = <0x80000000 0x40000000>;
};
pcie-controller@00003000 {
status = "okay";
avdd-pexa-supply = <&vdd2_reg>;
vdd-pexa-supply = <&vdd2_reg>;
avdd-pexb-supply = <&vdd2_reg>;
vdd-pexb-supply = <&vdd2_reg>;
avdd-pex-pll-supply = <&vdd2_reg>;
avdd-plle-supply = <&ldo6_reg>;
vddio-pex-ctl-supply = <&sys_3v3_reg>;
hvdd-pex-supply = <&sys_3v3_reg>;
pci@1,0 {
nvidia,num-lanes = <4>;
};
pci@2,0 {
nvidia,num-lanes = <1>;
};
pci@3,0 {
status = "okay";
nvidia,num-lanes = <1>;
};
};
/*
* GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier
* board)
*/
i2c@7000c000 {
status = "okay";
clock-frequency = <100000>;
};
/* GEN2_I2C: unused */
/*
* CAM_I2C: I2C3_SDA/SCL on MXM3 pin 201/203 (e.g. camera sensor on
* carrier board)
*/
i2c@7000c500 {
status = "okay";
clock-frequency = <100000>;
};
/* DDC: I2C2_SDA/SCL on MXM3 pin 205/207 (e.g. display EDID) */
i2c@7000c700 {
status = "okay";
clock-frequency = <100000>;
};
/*
* PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
* touch screen controller
*/
i2c@7000d000 {
status = "okay";
clock-frequency = <100000>;
pmic: tps65911@2d {
compatible = "ti,tps65911";
reg = <0x2d>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
interrupt-controller;
ti,system-power-controller;
#gpio-cells = <2>;
gpio-controller;
vcc1-supply = <&sys_3v3_reg>;
vcc2-supply = <&sys_3v3_reg>;
vcc3-supply = <&vio_reg>;
vcc4-supply = <&sys_3v3_reg>;
vcc5-supply = <&sys_3v3_reg>;
vcc6-supply = <&vio_reg>;
vcc7-supply = <&charge_pump_5v0_reg>;
vccio-supply = <&sys_3v3_reg>;
regulators {
#address-cells = <1>;
#size-cells = <0>;
/* SW1: +V1.35_VDDIO_DDR */
vdd1_reg: vdd1 {
regulator-name = "vddio_ddr_1v35";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
};
/* SW2: +V1.05 */
vdd2_reg: vdd2 {
regulator-name =
"vdd_pexa,vdd_pexb,vdd_sata";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
};
/* SW CTRL: +V1.0_VDD_CPU */
vddctrl_reg: vddctrl {
regulator-name = "vdd_cpu,vdd_sys";
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
regulator-always-on;
};
/* SWIO: +V1.8 */
vio_reg: vio {
regulator-name = "vdd_1v8_gen";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
/* LDO1: unused */
/*
* EN_+V3.3 switching via FET:
* +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN
* see also v3_3 fixed supply
*/
ldo2_reg: ldo2 {
regulator-name = "en_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
/* +V1.2_CSI */
ldo3_reg: ldo3 {
regulator-name =
"avdd_dsi_csi,pwrdet_mipi";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
/* +V1.2_VDD_RTC */
ldo4_reg: ldo4 {
regulator-name = "vdd_rtc";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
/*
* +V2.8_AVDD_VDAC:
* only required for analog RGB
*/
ldo5_reg: ldo5 {
regulator-name = "avdd_vdac";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
/*
* +V1.05_AVDD_PLLE: avdd_plle should be 1.05V
* but LDO6 can't set voltage in 50mV
* granularity
*/
ldo6_reg: ldo6 {
regulator-name = "avdd_plle";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
};
/* +V1.2_AVDD_PLL */
ldo7_reg: ldo7 {
regulator-name = "avdd_pll";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
/* +V1.0_VDD_DDR_HS */
ldo8_reg: ldo8 {
regulator-name = "vdd_ddr_hs";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
};
};
};
/* SPI1: Apalis SPI1 */
spi@7000d400 {
status = "okay";
spi-max-frequency = <25000000>;
};
/* SPI4: CAN2 */
spi@7000da00 {
status = "okay";
spi-max-frequency = <25000000>;
};
/* SPI5: Apalis SPI2 */
spi@7000dc00 {
status = "okay";
spi-max-frequency = <25000000>;
};
/* SPI6: CAN1 */
spi@7000de00 {
status = "okay";
spi-max-frequency = <25000000>;
};
sdhci@78000000 {
status = "okay";
bus-width = <4>;
/* SD1_CD# */
cd-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_LOW>;
};
sdhci@78000400 {
status = "okay";
bus-width = <8>;
/* MMC1_CD# */
cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
};
sdhci@78000600 {
status = "okay";
bus-width = <8>;
non-removable;
};
/* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */
usb@7d000000 {
status = "okay";
dr_mode = "otg";
/* USBO1_EN */
nvidia,vbus-gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
};
/* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
usb@7d004000 {
status = "okay";
/* USBH_EN */
nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
};
/* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */
usb@7d008000 {
status = "okay";
/* USBH_EN */
nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
};
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
clk32k_in: clk@0 {
compatible = "fixed-clock";
reg=<0>;
#clock-cells = <0>;
clock-frequency = <32768>;
};
clk16m: clk@1 {
compatible = "fixed-clock";
reg=<1>;
#clock-cells = <0>;
clock-frequency = <16000000>;
clock-output-names = "clk16m";
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
sys_3v3_reg: regulator@100 {
compatible = "regulator-fixed";
reg = <100>;
regulator-name = "3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
charge_pump_5v0_reg: regulator@101 {
compatible = "regulator-fixed";
reg = <101>;
regulator-name = "5v0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
};
};