u-boot/arch/arm/dts/imx8mp-evk-u-boot.dtsi
Marek Vasut 3fa3f23d1b ARM: dts: net: dwc_eth_qos: Fix i.MX8MP compatible string
The correct compatible string for i.MX8MP variant of DWC EQoS MAC
is "nxp,imx8mp-dwmac-eqos", use it. Drop the two current users of
the current wrong compatible string to avoid breaking them.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-04-12 15:36:17 +02:00

148 lines
1.5 KiB
Text

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2019, 2021 NXP
*/
#include "imx8mp-u-boot.dtsi"
/ {
wdt-reboot {
compatible = "wdt-reboot";
wdt = <&wdog1>;
u-boot,dm-spl;
};
firmware {
optee {
compatible = "linaro,optee-tz";
method = "smc";
};
};
};
&reg_usdhc2_vmmc {
u-boot,off-on-delay-us = <20000>;
};
&reg_usdhc2_vmmc {
u-boot,dm-spl;
};
&pinctrl_uart2 {
u-boot,dm-spl;
};
&pinctrl_usdhc2_gpio {
u-boot,dm-spl;
};
&pinctrl_usdhc2 {
u-boot,dm-spl;
};
&pinctrl_usdhc3 {
u-boot,dm-spl;
};
&gpio1 {
u-boot,dm-spl;
};
&gpio2 {
u-boot,dm-spl;
};
&gpio3 {
u-boot,dm-spl;
};
&gpio4 {
u-boot,dm-spl;
};
&gpio5 {
u-boot,dm-spl;
};
&uart2 {
u-boot,dm-spl;
};
&crypto {
u-boot,dm-spl;
};
&sec_jr0 {
u-boot,dm-spl;
};
&sec_jr1 {
u-boot,dm-spl;
};
&sec_jr2 {
u-boot,dm-spl;
};
&i2c1 {
u-boot,dm-spl;
};
&i2c2 {
u-boot,dm-spl;
};
&i2c3 {
u-boot,dm-spl;
};
&i2c4 {
u-boot,dm-spl;
};
&i2c5 {
u-boot,dm-spl;
};
&i2c6 {
u-boot,dm-spl;
};
&usdhc1 {
u-boot,dm-spl;
};
&usdhc2 {
u-boot,dm-spl;
sd-uhs-sdr104;
sd-uhs-ddr50;
};
&usdhc3 {
u-boot,dm-spl;
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
};
&wdog1 {
u-boot,dm-spl;
};
&eqos {
/delete-property/ assigned-clocks;
/delete-property/ assigned-clock-parents;
/delete-property/ assigned-clock-rates;
};
&ethphy0 {
reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
reset-delay-us = <15000>;
reset-post-delay-us = <100000>;
};
&fec {
phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
phy-reset-duration = <15>;
phy-reset-post-delay = <100>;
};