u-boot/configs/linkit-smart-7688_defconfig
Stefan Roese f06ada614f mips: mt76xx: linkit: Add mtd command support
The new mtd is very useful so let's enable it on the LinkIt Smart
7688 as well.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Jiri Kastner <cz172638@gmail.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-04-12 17:32:50 +02:00

63 lines
1.5 KiB
Text

CONFIG_MIPS=y
CONFIG_SYS_TEXT_BASE=0x9c000000
CONFIG_ARCH_MT7620=y
CONFIG_BOARD_LINKIT_SMART_7688=y
CONFIG_BOOT_ROM=y
CONFIG_ONBOARD_DDR2_SIZE_1024MBIT=y
CONFIG_ONBOARD_DDR2_CHIP_WIDTH_16BIT=y
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_IMAGE_FORMAT_LEGACY=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_LICENSE=y
# CONFIG_CMD_ELF is not set
# CONFIG_CMD_XIMG is not set
# CONFIG_CMD_CRC32 is not set
CONFIG_CMD_MEMINFO=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_MTD=y
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_TIME=y
CONFIG_DEFAULT_DEVICE_TREE="linkit-smart-7688"
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_NET_RANDOM_ETHADDR=y
# CONFIG_DM_DEVICE_REMOVE is not set
CONFIG_HAVE_BLOCK_DEVICE=y
CONFIG_CLK=y
CONFIG_LED=y
CONFIG_LED_BLINK=y
CONFIG_LED_GPIO=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SPI_FLASH_MTD=y
CONFIG_PHYLIB=y
CONFIG_PHY_FIXED=y
CONFIG_MT7628_ETH=y
CONFIG_PHY=y
CONFIG_POWER_DOMAIN=y
CONFIG_RAM=y
CONFIG_DM_RESET=y
# CONFIG_SPL_SERIAL_PRESENT is not set
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_MT7621_SPI=y
CONFIG_SYSRESET_SYSCON=y
CONFIG_LZMA=y
CONFIG_LZO=y