mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-16 08:13:17 +00:00
c9dffc9719
This patch changes the functioning of the detection of w1 devices. The old way was a comparison between detected w1 and the ones described in the device tree. Now it will just look for the driver matching the family id of the w1 detected. The patch is inspired from Maxime Ripard code. Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Reviewed-by: Maxime Ripard <maxime@cerno.tech>
251 lines
5.5 KiB
C
251 lines
5.5 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Driver for DS-2502 One wire "Add only Memory".
|
|
*
|
|
* The chip has 4 pages of 32 bytes.
|
|
* In addition it has 8 out of band status bytes that are used, by software,
|
|
* as page redirection bytes by an algorithm described in the data sheet.
|
|
* This is useful since data cannot be erased once written but it can be
|
|
* "patched" up to four times by switching pages.
|
|
*
|
|
* So, when a read request is entirely in the first page automatically
|
|
* apply the page redirection bytes (which allows the device to be seen as
|
|
* a 32 byte PROM, writable 4 times).
|
|
*
|
|
* If the read request is outside of or larger than the first page then read
|
|
* the raw data (which allows the device to be seen as a 128 byte PROM,
|
|
* writable once).
|
|
*
|
|
* Copyright (c) 2018 Flowbird
|
|
* Martin Fuzzey <martin.fuzzey@flowbird.group>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <dm/device_compat.h>
|
|
#include <linux/err.h>
|
|
#include <w1-eeprom.h>
|
|
#include <w1.h>
|
|
|
|
#define DS2502_PAGE_SIZE 32
|
|
#define DS2502_PAGE_COUNT 4
|
|
#define DS2502_STATUS_SIZE 8
|
|
|
|
#define DS2502_CMD_READ_STATUS 0xAA
|
|
#define DS2502_CMD_READ_GEN_CRC 0xC3
|
|
|
|
/* u-boot crc8() is CCITT CRC8, we need x^8 + x^5 + x^4 + 1 LSB first */
|
|
static unsigned int ds2502_crc8(const u8 *buf, int len)
|
|
{
|
|
static const u8 poly = 0x8C; /* (1 + x^4 + x^5) + x^8 */
|
|
u8 crc = 0;
|
|
int i;
|
|
|
|
for (i = 0; i < len; i++) {
|
|
u8 data = buf[i];
|
|
int j;
|
|
|
|
for (j = 0; j < 8; j++) {
|
|
u8 mix = (crc ^ data) & 1;
|
|
|
|
crc >>= 1;
|
|
if (mix)
|
|
crc ^= poly;
|
|
data >>= 1;
|
|
}
|
|
}
|
|
return crc;
|
|
}
|
|
|
|
static int ds2502_read(struct udevice *dev, u8 cmd,
|
|
int bytes_in_page, int pos,
|
|
u8 *buf, int bytes_for_user)
|
|
{
|
|
int retry;
|
|
int ret = 0;
|
|
|
|
for (retry = 0; retry < 3; retry++) {
|
|
u8 pagebuf[DS2502_PAGE_SIZE + 1]; /* 1 byte for CRC8 */
|
|
u8 crc;
|
|
int i;
|
|
|
|
ret = w1_reset_select(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* send read to end of page and generate CRC command */
|
|
pagebuf[0] = cmd;
|
|
pagebuf[1] = pos & 0xff;
|
|
pagebuf[2] = pos >> 8;
|
|
crc = ds2502_crc8(pagebuf, 3);
|
|
for (i = 0; i < 3; i++)
|
|
w1_write_byte(dev, pagebuf[i]);
|
|
|
|
/* Check command CRC */
|
|
ret = w1_read_byte(dev);
|
|
if (ret < 0) {
|
|
dev_dbg(dev, "Error %d reading command CRC\n", ret);
|
|
continue;
|
|
}
|
|
|
|
if (ret != crc) {
|
|
dev_dbg(dev,
|
|
"bad CRC8 for cmd %02x got=%02X exp=%02X\n",
|
|
cmd, ret, crc);
|
|
ret = -EIO;
|
|
continue;
|
|
}
|
|
|
|
/* read data and check CRC */
|
|
ret = w1_read_buf(dev, pagebuf, bytes_in_page + 1);
|
|
if (ret < 0) {
|
|
dev_dbg(dev, "Error %d reading data\n", ret);
|
|
continue;
|
|
}
|
|
|
|
crc = ds2502_crc8(pagebuf, bytes_in_page);
|
|
if (crc == pagebuf[bytes_in_page]) {
|
|
memcpy(buf, pagebuf, bytes_for_user);
|
|
ret = 0;
|
|
break;
|
|
}
|
|
dev_dbg(dev, "Bad CRC8 got=%02X exp=%02X pos=%04X\n",
|
|
pagebuf[bytes_in_page], crc, pos);
|
|
ret = -EIO;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static inline int ds2502_read_status_bytes(struct udevice *dev, u8 *buf)
|
|
{
|
|
return ds2502_read(dev, DS2502_CMD_READ_STATUS,
|
|
DS2502_STATUS_SIZE, 0,
|
|
buf, DS2502_STATUS_SIZE);
|
|
}
|
|
|
|
/*
|
|
* Status bytes (from index 1) contain 1's complement page indirection
|
|
* So for N writes:
|
|
* N=1: ff ff ff ff ff ff ff 00
|
|
* N=2: ff fe ff ff ff ff ff 00
|
|
* N=3: ff fe fd ff ff ff ff 00
|
|
* N=4: ff fe fd fc ff ff ff 00
|
|
*/
|
|
static int ds2502_indirect_page(struct udevice *dev, u8 *status, int page)
|
|
{
|
|
int page_seen = 0;
|
|
|
|
do {
|
|
u8 sb = status[page + 1];
|
|
|
|
if (sb == 0xff)
|
|
break;
|
|
|
|
page = ~sb & 0xff;
|
|
|
|
if (page >= DS2502_PAGE_COUNT) {
|
|
dev_err(dev,
|
|
"Illegal page redirection status byte %02x\n",
|
|
sb);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (page_seen & (1 << page)) {
|
|
dev_err(dev, "Infinite loop in page redirection\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
page_seen |= (1 << page);
|
|
} while (1);
|
|
|
|
return page;
|
|
}
|
|
|
|
static int ds2502_read_buf(struct udevice *dev, unsigned int offset,
|
|
u8 *buf, unsigned int count)
|
|
{
|
|
unsigned int min_page = offset / DS2502_PAGE_SIZE;
|
|
unsigned int max_page = (offset + count - 1) / DS2502_PAGE_SIZE;
|
|
int xfered = 0;
|
|
u8 status_bytes[DS2502_STATUS_SIZE];
|
|
int i;
|
|
int ret;
|
|
|
|
if (min_page >= DS2502_PAGE_COUNT || max_page >= DS2502_PAGE_COUNT)
|
|
return -EINVAL;
|
|
|
|
if (min_page == 0 && max_page == 0) {
|
|
ret = ds2502_read_status_bytes(dev, status_bytes);
|
|
if (ret)
|
|
return ret;
|
|
} else {
|
|
/* Dummy one to one page redirection */
|
|
memset(status_bytes, 0xff, sizeof(status_bytes));
|
|
}
|
|
|
|
for (i = min_page; i <= max_page; i++) {
|
|
int page;
|
|
int pos;
|
|
int bytes_in_page;
|
|
int bytes_for_user;
|
|
|
|
page = ds2502_indirect_page(dev, status_bytes, i);
|
|
if (page < 0)
|
|
return page;
|
|
dev_dbg(dev, "page logical %d => physical %d\n", i, page);
|
|
|
|
pos = page * DS2502_PAGE_SIZE;
|
|
if (i == min_page)
|
|
pos += offset % DS2502_PAGE_SIZE;
|
|
|
|
bytes_in_page = DS2502_PAGE_SIZE - (pos % DS2502_PAGE_SIZE);
|
|
|
|
if (i == max_page)
|
|
bytes_for_user = count - xfered;
|
|
else
|
|
bytes_for_user = bytes_in_page;
|
|
|
|
ret = ds2502_read(dev, DS2502_CMD_READ_GEN_CRC,
|
|
bytes_in_page, pos,
|
|
&buf[xfered], bytes_for_user);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
xfered += bytes_for_user;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ds2502_probe(struct udevice *dev)
|
|
{
|
|
struct w1_device *w1;
|
|
|
|
w1 = dev_get_parent_plat(dev);
|
|
w1->id = 0;
|
|
return 0;
|
|
}
|
|
|
|
static const struct w1_eeprom_ops ds2502_ops = {
|
|
.read_buf = ds2502_read_buf,
|
|
};
|
|
|
|
static const struct udevice_id ds2502_id[] = {
|
|
{ .compatible = "maxim,ds2502", .data = W1_FAMILY_DS2502 },
|
|
{ },
|
|
};
|
|
|
|
U_BOOT_DRIVER(ds2502) = {
|
|
.name = "ds2502",
|
|
.id = UCLASS_W1_EEPROM,
|
|
.of_match = ds2502_id,
|
|
.ops = &ds2502_ops,
|
|
.probe = ds2502_probe,
|
|
};
|
|
|
|
u8 family_supported[] = {
|
|
W1_FAMILY_DS2502,
|
|
};
|
|
|
|
U_BOOT_W1_DEVICE(ds2502, family_supported);
|