mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 16:39:35 +00:00
3a197b2fe4
Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command is fully finished. The sync() is defined in each CPU's io.h file. For those CPUs which do not need sync for now, a dummy sync() is defined in their io.h as well. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
1528 lines
42 KiB
C
1528 lines
42 KiB
C
/*
|
|
* (C) Copyright 2002-2004
|
|
* Brad Kemp, Seranoa Networks, Brad.Kemp@seranoa.com
|
|
*
|
|
* Copyright (C) 2003 Arabella Software Ltd.
|
|
* Yuli Barcohen <yuli@arabellasw.com>
|
|
*
|
|
* Copyright (C) 2004
|
|
* Ed Okerson
|
|
*
|
|
* Copyright (C) 2006
|
|
* Tolunay Orkun <listmember@orkun.us>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*
|
|
*/
|
|
|
|
/* The DEBUG define must be before common to enable debugging */
|
|
/* #define DEBUG */
|
|
|
|
#include <common.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/io.h>
|
|
#include <asm/byteorder.h>
|
|
#include <environment.h>
|
|
#ifdef CFG_FLASH_CFI_DRIVER
|
|
|
|
/*
|
|
* This file implements a Common Flash Interface (CFI) driver for U-Boot.
|
|
* The width of the port and the width of the chips are determined at initialization.
|
|
* These widths are used to calculate the address for access CFI data structures.
|
|
*
|
|
* References
|
|
* JEDEC Standard JESD68 - Common Flash Interface (CFI)
|
|
* JEDEC Standard JEP137-A Common Flash Interface (CFI) ID Codes
|
|
* Intel Application Note 646 Common Flash Interface (CFI) and Command Sets
|
|
* Intel 290667-008 3 Volt Intel StrataFlash Memory datasheet
|
|
* AMD CFI Specification, Release 2.0 December 1, 2001
|
|
* AMD/Spansion Application Note: Migration from Single-byte to Three-byte
|
|
* Device IDs, Publication Number 25538 Revision A, November 8, 2001
|
|
*
|
|
* define CFG_WRITE_SWAPPED_DATA, if you have to swap the Bytes between
|
|
* reading and writing ... (yes there is such a Hardware).
|
|
*/
|
|
|
|
#ifndef CFG_FLASH_BANKS_LIST
|
|
#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
|
|
#endif
|
|
|
|
#define FLASH_CMD_CFI 0x98
|
|
#define FLASH_CMD_READ_ID 0x90
|
|
#define FLASH_CMD_RESET 0xff
|
|
#define FLASH_CMD_BLOCK_ERASE 0x20
|
|
#define FLASH_CMD_ERASE_CONFIRM 0xD0
|
|
#define FLASH_CMD_WRITE 0x40
|
|
#define FLASH_CMD_PROTECT 0x60
|
|
#define FLASH_CMD_PROTECT_SET 0x01
|
|
#define FLASH_CMD_PROTECT_CLEAR 0xD0
|
|
#define FLASH_CMD_CLEAR_STATUS 0x50
|
|
#define FLASH_CMD_WRITE_TO_BUFFER 0xE8
|
|
#define FLASH_CMD_WRITE_BUFFER_CONFIRM 0xD0
|
|
|
|
#define FLASH_STATUS_DONE 0x80
|
|
#define FLASH_STATUS_ESS 0x40
|
|
#define FLASH_STATUS_ECLBS 0x20
|
|
#define FLASH_STATUS_PSLBS 0x10
|
|
#define FLASH_STATUS_VPENS 0x08
|
|
#define FLASH_STATUS_PSS 0x04
|
|
#define FLASH_STATUS_DPS 0x02
|
|
#define FLASH_STATUS_R 0x01
|
|
#define FLASH_STATUS_PROTECT 0x01
|
|
|
|
#define AMD_CMD_RESET 0xF0
|
|
#define AMD_CMD_WRITE 0xA0
|
|
#define AMD_CMD_ERASE_START 0x80
|
|
#define AMD_CMD_ERASE_SECTOR 0x30
|
|
#define AMD_CMD_UNLOCK_START 0xAA
|
|
#define AMD_CMD_UNLOCK_ACK 0x55
|
|
#define AMD_CMD_WRITE_TO_BUFFER 0x25
|
|
#define AMD_CMD_WRITE_BUFFER_CONFIRM 0x29
|
|
|
|
#define AMD_STATUS_TOGGLE 0x40
|
|
#define AMD_STATUS_ERROR 0x20
|
|
|
|
#define AMD_ADDR_ERASE_START ((info->portwidth == FLASH_CFI_8BIT) ? 0xAAA : 0x555)
|
|
#define AMD_ADDR_START ((info->portwidth == FLASH_CFI_8BIT) ? 0xAAA : 0x555)
|
|
#define AMD_ADDR_ACK ((info->portwidth == FLASH_CFI_8BIT) ? 0x555 : 0x2AA)
|
|
|
|
#define FLASH_OFFSET_MANUFACTURER_ID 0x00
|
|
#define FLASH_OFFSET_DEVICE_ID 0x01
|
|
#define FLASH_OFFSET_DEVICE_ID2 0x0E
|
|
#define FLASH_OFFSET_DEVICE_ID3 0x0F
|
|
#define FLASH_OFFSET_CFI 0x55
|
|
#define FLASH_OFFSET_CFI_ALT 0x555
|
|
#define FLASH_OFFSET_CFI_RESP 0x10
|
|
#define FLASH_OFFSET_PRIMARY_VENDOR 0x13
|
|
#define FLASH_OFFSET_EXT_QUERY_T_P_ADDR 0x15 /* extended query table primary addr */
|
|
#define FLASH_OFFSET_WTOUT 0x1F
|
|
#define FLASH_OFFSET_WBTOUT 0x20
|
|
#define FLASH_OFFSET_ETOUT 0x21
|
|
#define FLASH_OFFSET_CETOUT 0x22
|
|
#define FLASH_OFFSET_WMAX_TOUT 0x23
|
|
#define FLASH_OFFSET_WBMAX_TOUT 0x24
|
|
#define FLASH_OFFSET_EMAX_TOUT 0x25
|
|
#define FLASH_OFFSET_CEMAX_TOUT 0x26
|
|
#define FLASH_OFFSET_SIZE 0x27
|
|
#define FLASH_OFFSET_INTERFACE 0x28
|
|
#define FLASH_OFFSET_BUFFER_SIZE 0x2A
|
|
#define FLASH_OFFSET_NUM_ERASE_REGIONS 0x2C
|
|
#define FLASH_OFFSET_ERASE_REGIONS 0x2D
|
|
#define FLASH_OFFSET_PROTECT 0x02
|
|
#define FLASH_OFFSET_USER_PROTECTION 0x85
|
|
#define FLASH_OFFSET_INTEL_PROTECTION 0x81
|
|
|
|
#define CFI_CMDSET_NONE 0
|
|
#define CFI_CMDSET_INTEL_EXTENDED 1
|
|
#define CFI_CMDSET_AMD_STANDARD 2
|
|
#define CFI_CMDSET_INTEL_STANDARD 3
|
|
#define CFI_CMDSET_AMD_EXTENDED 4
|
|
#define CFI_CMDSET_MITSU_STANDARD 256
|
|
#define CFI_CMDSET_MITSU_EXTENDED 257
|
|
#define CFI_CMDSET_SST 258
|
|
|
|
#ifdef CFG_FLASH_CFI_AMD_RESET /* needed for STM_ID_29W320DB on UC100 */
|
|
# undef FLASH_CMD_RESET
|
|
# define FLASH_CMD_RESET AMD_CMD_RESET /* use AMD-Reset instead */
|
|
#endif
|
|
|
|
typedef union {
|
|
unsigned char c;
|
|
unsigned short w;
|
|
unsigned long l;
|
|
unsigned long long ll;
|
|
} cfiword_t;
|
|
|
|
typedef union {
|
|
volatile unsigned char *cp;
|
|
volatile unsigned short *wp;
|
|
volatile unsigned long *lp;
|
|
volatile unsigned long long *llp;
|
|
} cfiptr_t;
|
|
|
|
#define NUM_ERASE_REGIONS 4 /* max. number of erase regions */
|
|
|
|
static uint flash_offset_cfi[2]={FLASH_OFFSET_CFI,FLASH_OFFSET_CFI_ALT};
|
|
|
|
/* use CFG_MAX_FLASH_BANKS_DETECT if defined */
|
|
#ifdef CFG_MAX_FLASH_BANKS_DETECT
|
|
static ulong bank_base[CFG_MAX_FLASH_BANKS_DETECT] = CFG_FLASH_BANKS_LIST;
|
|
flash_info_t flash_info[CFG_MAX_FLASH_BANKS_DETECT]; /* FLASH chips info */
|
|
#else
|
|
static ulong bank_base[CFG_MAX_FLASH_BANKS] = CFG_FLASH_BANKS_LIST;
|
|
flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* FLASH chips info */
|
|
#endif
|
|
|
|
/*
|
|
* Check if chip width is defined. If not, start detecting with 8bit.
|
|
*/
|
|
#ifndef CFG_FLASH_CFI_WIDTH
|
|
#define CFG_FLASH_CFI_WIDTH FLASH_CFI_8BIT
|
|
#endif
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Functions
|
|
*/
|
|
|
|
typedef unsigned long flash_sect_t;
|
|
|
|
static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c);
|
|
static void flash_make_cmd (flash_info_t * info, uchar cmd, void *cmdbuf);
|
|
static void flash_write_cmd (flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd);
|
|
static void flash_unlock_seq (flash_info_t * info, flash_sect_t sect);
|
|
static int flash_isequal (flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd);
|
|
static int flash_isset (flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd);
|
|
static int flash_toggle (flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd);
|
|
static void flash_read_jedec_ids (flash_info_t * info);
|
|
static int flash_detect_cfi (flash_info_t * info);
|
|
static int flash_write_cfiword (flash_info_t * info, ulong dest, cfiword_t cword);
|
|
static int flash_full_status_check (flash_info_t * info, flash_sect_t sector,
|
|
ulong tout, char *prompt);
|
|
ulong flash_get_size (ulong base, int banknum);
|
|
#if defined(CFG_ENV_IS_IN_FLASH) || defined(CFG_ENV_ADDR_REDUND) || (CFG_MONITOR_BASE >= CFG_FLASH_BASE)
|
|
static flash_info_t *flash_get_info(ulong base);
|
|
#endif
|
|
#ifdef CFG_FLASH_USE_BUFFER_WRITE
|
|
static int flash_write_cfibuffer (flash_info_t * info, ulong dest, uchar * cp, int len);
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* create an address based on the offset and the port width
|
|
*/
|
|
inline uchar *flash_make_addr (flash_info_t * info, flash_sect_t sect, uint offset)
|
|
{
|
|
return ((uchar *) (info->start[sect] + (offset * info->portwidth)));
|
|
}
|
|
|
|
#ifdef DEBUG
|
|
/*-----------------------------------------------------------------------
|
|
* Debug support
|
|
*/
|
|
void print_longlong (char *str, unsigned long long data)
|
|
{
|
|
int i;
|
|
char *cp;
|
|
|
|
cp = (unsigned char *) &data;
|
|
for (i = 0; i < 8; i++)
|
|
sprintf (&str[i * 2], "%2.2x", *cp++);
|
|
}
|
|
static void flash_printqry (flash_info_t * info, flash_sect_t sect)
|
|
{
|
|
cfiptr_t cptr;
|
|
int x, y;
|
|
|
|
for (x = 0; x < 0x40; x += 16U / info->portwidth) {
|
|
cptr.cp =
|
|
flash_make_addr (info, sect,
|
|
x + FLASH_OFFSET_CFI_RESP);
|
|
debug ("%p : ", cptr.cp);
|
|
for (y = 0; y < 16; y++) {
|
|
debug ("%2.2x ", cptr.cp[y]);
|
|
}
|
|
debug (" ");
|
|
for (y = 0; y < 16; y++) {
|
|
if (cptr.cp[y] >= 0x20 && cptr.cp[y] <= 0x7e) {
|
|
debug ("%c", cptr.cp[y]);
|
|
} else {
|
|
debug (".");
|
|
}
|
|
}
|
|
debug ("\n");
|
|
}
|
|
}
|
|
#endif
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* read a character at a port width address
|
|
*/
|
|
inline uchar flash_read_uchar (flash_info_t * info, uint offset)
|
|
{
|
|
uchar *cp;
|
|
|
|
cp = flash_make_addr (info, 0, offset);
|
|
#if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA)
|
|
return (cp[0]);
|
|
#else
|
|
return (cp[info->portwidth - 1]);
|
|
#endif
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* read a short word by swapping for ppc format.
|
|
*/
|
|
ushort flash_read_ushort (flash_info_t * info, flash_sect_t sect, uint offset)
|
|
{
|
|
uchar *addr;
|
|
ushort retval;
|
|
|
|
#ifdef DEBUG
|
|
int x;
|
|
#endif
|
|
addr = flash_make_addr (info, sect, offset);
|
|
|
|
#ifdef DEBUG
|
|
debug ("ushort addr is at %p info->portwidth = %d\n", addr,
|
|
info->portwidth);
|
|
for (x = 0; x < 2 * info->portwidth; x++) {
|
|
debug ("addr[%x] = 0x%x\n", x, addr[x]);
|
|
}
|
|
#endif
|
|
#if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA)
|
|
retval = ((addr[(info->portwidth)] << 8) | addr[0]);
|
|
#else
|
|
retval = ((addr[(2 * info->portwidth) - 1] << 8) |
|
|
addr[info->portwidth - 1]);
|
|
#endif
|
|
|
|
debug ("retval = 0x%x\n", retval);
|
|
return retval;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* read a long word by picking the least significant byte of each maximum
|
|
* port size word. Swap for ppc format.
|
|
*/
|
|
ulong flash_read_long (flash_info_t * info, flash_sect_t sect, uint offset)
|
|
{
|
|
uchar *addr;
|
|
ulong retval;
|
|
|
|
#ifdef DEBUG
|
|
int x;
|
|
#endif
|
|
addr = flash_make_addr (info, sect, offset);
|
|
|
|
#ifdef DEBUG
|
|
debug ("long addr is at %p info->portwidth = %d\n", addr,
|
|
info->portwidth);
|
|
for (x = 0; x < 4 * info->portwidth; x++) {
|
|
debug ("addr[%x] = 0x%x\n", x, addr[x]);
|
|
}
|
|
#endif
|
|
#if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA)
|
|
retval = (addr[0] << 16) | (addr[(info->portwidth)] << 24) |
|
|
(addr[(2 * info->portwidth)]) | (addr[(3 * info->portwidth)] << 8);
|
|
#else
|
|
retval = (addr[(2 * info->portwidth) - 1] << 24) |
|
|
(addr[(info->portwidth) - 1] << 16) |
|
|
(addr[(4 * info->portwidth) - 1] << 8) |
|
|
addr[(3 * info->portwidth) - 1];
|
|
#endif
|
|
return retval;
|
|
}
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
unsigned long flash_init (void)
|
|
{
|
|
unsigned long size = 0;
|
|
int i;
|
|
|
|
#ifdef CFG_FLASH_PROTECTION
|
|
char *s = getenv("unlock");
|
|
#endif
|
|
|
|
/* Init: no FLASHes known */
|
|
for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
|
|
flash_info[i].flash_id = FLASH_UNKNOWN;
|
|
size += flash_info[i].size = flash_get_size (bank_base[i], i);
|
|
if (flash_info[i].flash_id == FLASH_UNKNOWN) {
|
|
#ifndef CFG_FLASH_QUIET_TEST
|
|
printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
|
|
i+1, flash_info[i].size, flash_info[i].size << 20);
|
|
#endif /* CFG_FLASH_QUIET_TEST */
|
|
}
|
|
#ifdef CFG_FLASH_PROTECTION
|
|
else if ((s != NULL) && (strcmp(s, "yes") == 0)) {
|
|
/*
|
|
* Only the U-Boot image and it's environment is protected,
|
|
* all other sectors are unprotected (unlocked) if flash
|
|
* hardware protection is used (CFG_FLASH_PROTECTION) and
|
|
* the environment variable "unlock" is set to "yes".
|
|
*/
|
|
if (flash_info[i].legacy_unlock) {
|
|
int k;
|
|
|
|
/*
|
|
* Disable legacy_unlock temporarily, since
|
|
* flash_real_protect would relock all other sectors
|
|
* again otherwise.
|
|
*/
|
|
flash_info[i].legacy_unlock = 0;
|
|
|
|
/*
|
|
* Legacy unlocking (e.g. Intel J3) -> unlock only one
|
|
* sector. This will unlock all sectors.
|
|
*/
|
|
flash_real_protect (&flash_info[i], 0, 0);
|
|
|
|
flash_info[i].legacy_unlock = 1;
|
|
|
|
/*
|
|
* Manually mark other sectors as unlocked (unprotected)
|
|
*/
|
|
for (k = 1; k < flash_info[i].sector_count; k++)
|
|
flash_info[i].protect[k] = 0;
|
|
} else {
|
|
/*
|
|
* No legancy unlocking -> unlock all sectors
|
|
*/
|
|
flash_protect (FLAG_PROTECT_CLEAR,
|
|
flash_info[i].start[0],
|
|
flash_info[i].start[0] + flash_info[i].size - 1,
|
|
&flash_info[i]);
|
|
}
|
|
}
|
|
#endif /* CFG_FLASH_PROTECTION */
|
|
}
|
|
|
|
/* Monitor protection ON by default */
|
|
#if (CFG_MONITOR_BASE >= CFG_FLASH_BASE)
|
|
flash_protect (FLAG_PROTECT_SET,
|
|
CFG_MONITOR_BASE,
|
|
CFG_MONITOR_BASE + monitor_flash_len - 1,
|
|
flash_get_info(CFG_MONITOR_BASE));
|
|
#endif
|
|
|
|
/* Environment protection ON by default */
|
|
#ifdef CFG_ENV_IS_IN_FLASH
|
|
flash_protect (FLAG_PROTECT_SET,
|
|
CFG_ENV_ADDR,
|
|
CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
|
|
flash_get_info(CFG_ENV_ADDR));
|
|
#endif
|
|
|
|
/* Redundant environment protection ON by default */
|
|
#ifdef CFG_ENV_ADDR_REDUND
|
|
flash_protect (FLAG_PROTECT_SET,
|
|
CFG_ENV_ADDR_REDUND,
|
|
CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1,
|
|
flash_get_info(CFG_ENV_ADDR_REDUND));
|
|
#endif
|
|
return (size);
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
#if defined(CFG_ENV_IS_IN_FLASH) || defined(CFG_ENV_ADDR_REDUND) || (CFG_MONITOR_BASE >= CFG_FLASH_BASE)
|
|
static flash_info_t *flash_get_info(ulong base)
|
|
{
|
|
int i;
|
|
flash_info_t * info = 0;
|
|
|
|
for (i = 0; i < CFG_MAX_FLASH_BANKS; i ++) {
|
|
info = & flash_info[i];
|
|
if (info->size && info->start[0] <= base &&
|
|
base <= info->start[0] + info->size - 1)
|
|
break;
|
|
}
|
|
|
|
return i == CFG_MAX_FLASH_BANKS ? 0 : info;
|
|
}
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
int flash_erase (flash_info_t * info, int s_first, int s_last)
|
|
{
|
|
int rcode = 0;
|
|
int prot;
|
|
flash_sect_t sect;
|
|
|
|
if (info->flash_id != FLASH_MAN_CFI) {
|
|
puts ("Can't erase unknown flash type - aborted\n");
|
|
return 1;
|
|
}
|
|
if ((s_first < 0) || (s_first > s_last)) {
|
|
puts ("- no sectors to erase\n");
|
|
return 1;
|
|
}
|
|
|
|
prot = 0;
|
|
for (sect = s_first; sect <= s_last; ++sect) {
|
|
if (info->protect[sect]) {
|
|
prot++;
|
|
}
|
|
}
|
|
if (prot) {
|
|
printf ("- Warning: %d protected sectors will not be erased!\n", prot);
|
|
} else {
|
|
putc ('\n');
|
|
}
|
|
|
|
|
|
for (sect = s_first; sect <= s_last; sect++) {
|
|
if (info->protect[sect] == 0) { /* not protected */
|
|
switch (info->vendor) {
|
|
case CFI_CMDSET_INTEL_STANDARD:
|
|
case CFI_CMDSET_INTEL_EXTENDED:
|
|
flash_write_cmd (info, sect, 0, FLASH_CMD_CLEAR_STATUS);
|
|
flash_write_cmd (info, sect, 0, FLASH_CMD_BLOCK_ERASE);
|
|
flash_write_cmd (info, sect, 0, FLASH_CMD_ERASE_CONFIRM);
|
|
break;
|
|
case CFI_CMDSET_AMD_STANDARD:
|
|
case CFI_CMDSET_AMD_EXTENDED:
|
|
flash_unlock_seq (info, sect);
|
|
flash_write_cmd (info, sect, AMD_ADDR_ERASE_START,
|
|
AMD_CMD_ERASE_START);
|
|
flash_unlock_seq (info, sect);
|
|
flash_write_cmd (info, sect, 0, AMD_CMD_ERASE_SECTOR);
|
|
break;
|
|
default:
|
|
debug ("Unkown flash vendor %d\n",
|
|
info->vendor);
|
|
break;
|
|
}
|
|
|
|
if (flash_full_status_check
|
|
(info, sect, info->erase_blk_tout, "erase")) {
|
|
rcode = 1;
|
|
} else
|
|
putc ('.');
|
|
}
|
|
}
|
|
puts (" done\n");
|
|
return rcode;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
void flash_print_info (flash_info_t * info)
|
|
{
|
|
int i;
|
|
|
|
if (info->flash_id != FLASH_MAN_CFI) {
|
|
puts ("missing or unknown FLASH type\n");
|
|
return;
|
|
}
|
|
|
|
printf ("CFI conformant FLASH (%d x %d)",
|
|
(info->portwidth << 3), (info->chipwidth << 3));
|
|
printf (" Size: %ld MB in %d Sectors\n",
|
|
info->size >> 20, info->sector_count);
|
|
printf (" ");
|
|
switch (info->vendor) {
|
|
case CFI_CMDSET_INTEL_STANDARD:
|
|
printf ("Intel Standard");
|
|
break;
|
|
case CFI_CMDSET_INTEL_EXTENDED:
|
|
printf ("Intel Extended");
|
|
break;
|
|
case CFI_CMDSET_AMD_STANDARD:
|
|
printf ("AMD Standard");
|
|
break;
|
|
case CFI_CMDSET_AMD_EXTENDED:
|
|
printf ("AMD Extended");
|
|
break;
|
|
default:
|
|
printf ("Unknown (%d)", info->vendor);
|
|
break;
|
|
}
|
|
printf (" command set, Manufacturer ID: 0x%02X, Device ID: 0x%02X",
|
|
info->manufacturer_id, info->device_id);
|
|
if (info->device_id == 0x7E) {
|
|
printf("%04X", info->device_id2);
|
|
}
|
|
printf ("\n Erase timeout: %ld ms, write timeout: %ld ms\n",
|
|
info->erase_blk_tout,
|
|
info->write_tout);
|
|
if (info->buffer_size > 1) {
|
|
printf (" Buffer write timeout: %ld ms, buffer size: %d bytes\n",
|
|
info->buffer_write_tout,
|
|
info->buffer_size);
|
|
}
|
|
|
|
puts ("\n Sector Start Addresses:");
|
|
for (i = 0; i < info->sector_count; ++i) {
|
|
if ((i % 5) == 0)
|
|
printf ("\n");
|
|
#ifdef CFG_FLASH_EMPTY_INFO
|
|
int k;
|
|
int size;
|
|
int erased;
|
|
volatile unsigned long *flash;
|
|
|
|
/*
|
|
* Check if whole sector is erased
|
|
*/
|
|
if (i != (info->sector_count - 1))
|
|
size = info->start[i + 1] - info->start[i];
|
|
else
|
|
size = info->start[0] + info->size - info->start[i];
|
|
erased = 1;
|
|
flash = (volatile unsigned long *) info->start[i];
|
|
size = size >> 2; /* divide by 4 for longword access */
|
|
for (k = 0; k < size; k++) {
|
|
if (*flash++ != 0xffffffff) {
|
|
erased = 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* print empty and read-only info */
|
|
printf (" %08lX %c %s ",
|
|
info->start[i],
|
|
erased ? 'E' : ' ',
|
|
info->protect[i] ? "RO" : " ");
|
|
#else /* ! CFG_FLASH_EMPTY_INFO */
|
|
printf (" %08lX %s ",
|
|
info->start[i],
|
|
info->protect[i] ? "RO" : " ");
|
|
#endif
|
|
}
|
|
putc ('\n');
|
|
return;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Copy memory to flash, returns:
|
|
* 0 - OK
|
|
* 1 - write timeout
|
|
* 2 - Flash not erased
|
|
*/
|
|
int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
|
|
{
|
|
ulong wp;
|
|
ulong cp;
|
|
int aln;
|
|
cfiword_t cword;
|
|
int i, rc;
|
|
|
|
#ifdef CFG_FLASH_USE_BUFFER_WRITE
|
|
int buffered_size;
|
|
#endif
|
|
/* get lower aligned address */
|
|
/* get lower aligned address */
|
|
wp = (addr & ~(info->portwidth - 1));
|
|
|
|
/* handle unaligned start */
|
|
if ((aln = addr - wp) != 0) {
|
|
cword.l = 0;
|
|
cp = wp;
|
|
for (i = 0; i < aln; ++i, ++cp)
|
|
flash_add_byte (info, &cword, (*(uchar *) cp));
|
|
|
|
for (; (i < info->portwidth) && (cnt > 0); i++) {
|
|
flash_add_byte (info, &cword, *src++);
|
|
cnt--;
|
|
cp++;
|
|
}
|
|
for (; (cnt == 0) && (i < info->portwidth); ++i, ++cp)
|
|
flash_add_byte (info, &cword, (*(uchar *) cp));
|
|
if ((rc = flash_write_cfiword (info, wp, cword)) != 0)
|
|
return rc;
|
|
wp = cp;
|
|
}
|
|
|
|
/* handle the aligned part */
|
|
#ifdef CFG_FLASH_USE_BUFFER_WRITE
|
|
buffered_size = (info->portwidth / info->chipwidth);
|
|
buffered_size *= info->buffer_size;
|
|
while (cnt >= info->portwidth) {
|
|
/* prohibit buffer write when buffer_size is 1 */
|
|
if (info->buffer_size == 1) {
|
|
cword.l = 0;
|
|
for (i = 0; i < info->portwidth; i++)
|
|
flash_add_byte (info, &cword, *src++);
|
|
if ((rc = flash_write_cfiword (info, wp, cword)) != 0)
|
|
return rc;
|
|
wp += info->portwidth;
|
|
cnt -= info->portwidth;
|
|
continue;
|
|
}
|
|
|
|
/* write buffer until next buffered_size aligned boundary */
|
|
i = buffered_size - (wp % buffered_size);
|
|
if (i > cnt)
|
|
i = cnt;
|
|
if ((rc = flash_write_cfibuffer (info, wp, src, i)) != ERR_OK)
|
|
return rc;
|
|
i -= i & (info->portwidth - 1);
|
|
wp += i;
|
|
src += i;
|
|
cnt -= i;
|
|
}
|
|
#else
|
|
while (cnt >= info->portwidth) {
|
|
cword.l = 0;
|
|
for (i = 0; i < info->portwidth; i++) {
|
|
flash_add_byte (info, &cword, *src++);
|
|
}
|
|
if ((rc = flash_write_cfiword (info, wp, cword)) != 0)
|
|
return rc;
|
|
wp += info->portwidth;
|
|
cnt -= info->portwidth;
|
|
}
|
|
#endif /* CFG_FLASH_USE_BUFFER_WRITE */
|
|
if (cnt == 0) {
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* handle unaligned tail bytes
|
|
*/
|
|
cword.l = 0;
|
|
for (i = 0, cp = wp; (i < info->portwidth) && (cnt > 0); ++i, ++cp) {
|
|
flash_add_byte (info, &cword, *src++);
|
|
--cnt;
|
|
}
|
|
for (; i < info->portwidth; ++i, ++cp) {
|
|
flash_add_byte (info, &cword, (*(uchar *) cp));
|
|
}
|
|
|
|
return flash_write_cfiword (info, wp, cword);
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
#ifdef CFG_FLASH_PROTECTION
|
|
|
|
int flash_real_protect (flash_info_t * info, long sector, int prot)
|
|
{
|
|
int retcode = 0;
|
|
|
|
flash_write_cmd (info, sector, 0, FLASH_CMD_CLEAR_STATUS);
|
|
flash_write_cmd (info, sector, 0, FLASH_CMD_PROTECT);
|
|
if (prot)
|
|
flash_write_cmd (info, sector, 0, FLASH_CMD_PROTECT_SET);
|
|
else
|
|
flash_write_cmd (info, sector, 0, FLASH_CMD_PROTECT_CLEAR);
|
|
|
|
if ((retcode =
|
|
flash_full_status_check (info, sector, info->erase_blk_tout,
|
|
prot ? "protect" : "unprotect")) == 0) {
|
|
|
|
info->protect[sector] = prot;
|
|
|
|
/*
|
|
* On some of Intel's flash chips (marked via legacy_unlock)
|
|
* unprotect unprotects all locking.
|
|
*/
|
|
if ((prot == 0) && (info->legacy_unlock)) {
|
|
flash_sect_t i;
|
|
|
|
for (i = 0; i < info->sector_count; i++) {
|
|
if (info->protect[i])
|
|
flash_real_protect (info, i, 1);
|
|
}
|
|
}
|
|
}
|
|
return retcode;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* flash_read_user_serial - read the OneTimeProgramming cells
|
|
*/
|
|
void flash_read_user_serial (flash_info_t * info, void *buffer, int offset,
|
|
int len)
|
|
{
|
|
uchar *src;
|
|
uchar *dst;
|
|
|
|
dst = buffer;
|
|
src = flash_make_addr (info, 0, FLASH_OFFSET_USER_PROTECTION);
|
|
flash_write_cmd (info, 0, 0, FLASH_CMD_READ_ID);
|
|
memcpy (dst, src + offset, len);
|
|
flash_write_cmd (info, 0, 0, info->cmd_reset);
|
|
}
|
|
|
|
/*
|
|
* flash_read_factory_serial - read the device Id from the protection area
|
|
*/
|
|
void flash_read_factory_serial (flash_info_t * info, void *buffer, int offset,
|
|
int len)
|
|
{
|
|
uchar *src;
|
|
|
|
src = flash_make_addr (info, 0, FLASH_OFFSET_INTEL_PROTECTION);
|
|
flash_write_cmd (info, 0, 0, FLASH_CMD_READ_ID);
|
|
memcpy (buffer, src + offset, len);
|
|
flash_write_cmd (info, 0, 0, info->cmd_reset);
|
|
}
|
|
|
|
#endif /* CFG_FLASH_PROTECTION */
|
|
|
|
/*
|
|
* flash_is_busy - check to see if the flash is busy
|
|
* This routine checks the status of the chip and returns true if the chip is busy
|
|
*/
|
|
static int flash_is_busy (flash_info_t * info, flash_sect_t sect)
|
|
{
|
|
int retval;
|
|
|
|
switch (info->vendor) {
|
|
case CFI_CMDSET_INTEL_STANDARD:
|
|
case CFI_CMDSET_INTEL_EXTENDED:
|
|
retval = !flash_isset (info, sect, 0, FLASH_STATUS_DONE);
|
|
break;
|
|
case CFI_CMDSET_AMD_STANDARD:
|
|
case CFI_CMDSET_AMD_EXTENDED:
|
|
retval = flash_toggle (info, sect, 0, AMD_STATUS_TOGGLE);
|
|
break;
|
|
default:
|
|
retval = 0;
|
|
}
|
|
debug ("flash_is_busy: %d\n", retval);
|
|
return retval;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* wait for XSR.7 to be set. Time out with an error if it does not.
|
|
* This routine does not set the flash to read-array mode.
|
|
*/
|
|
static int flash_status_check (flash_info_t * info, flash_sect_t sector,
|
|
ulong tout, char *prompt)
|
|
{
|
|
ulong start;
|
|
|
|
#if CFG_HZ != 1000
|
|
tout *= CFG_HZ/1000;
|
|
#endif
|
|
|
|
/* Wait for command completion */
|
|
start = get_timer (0);
|
|
while (flash_is_busy (info, sector)) {
|
|
if (get_timer (start) > tout) {
|
|
printf ("Flash %s timeout at address %lx data %lx\n",
|
|
prompt, info->start[sector],
|
|
flash_read_long (info, sector, 0));
|
|
flash_write_cmd (info, sector, 0, info->cmd_reset);
|
|
return ERR_TIMOUT;
|
|
}
|
|
udelay (1); /* also triggers watchdog */
|
|
}
|
|
return ERR_OK;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Wait for XSR.7 to be set, if it times out print an error, otherwise do a full status check.
|
|
* This routine sets the flash to read-array mode.
|
|
*/
|
|
static int flash_full_status_check (flash_info_t * info, flash_sect_t sector,
|
|
ulong tout, char *prompt)
|
|
{
|
|
int retcode;
|
|
|
|
retcode = flash_status_check (info, sector, tout, prompt);
|
|
switch (info->vendor) {
|
|
case CFI_CMDSET_INTEL_EXTENDED:
|
|
case CFI_CMDSET_INTEL_STANDARD:
|
|
if ((retcode == ERR_OK)
|
|
&& !flash_isequal (info, sector, 0, FLASH_STATUS_DONE)) {
|
|
retcode = ERR_INVAL;
|
|
printf ("Flash %s error at address %lx\n", prompt,
|
|
info->start[sector]);
|
|
if (flash_isset (info, sector, 0, FLASH_STATUS_ECLBS | FLASH_STATUS_PSLBS)) {
|
|
puts ("Command Sequence Error.\n");
|
|
} else if (flash_isset (info, sector, 0, FLASH_STATUS_ECLBS)) {
|
|
puts ("Block Erase Error.\n");
|
|
retcode = ERR_NOT_ERASED;
|
|
} else if (flash_isset (info, sector, 0, FLASH_STATUS_PSLBS)) {
|
|
puts ("Locking Error\n");
|
|
}
|
|
if (flash_isset (info, sector, 0, FLASH_STATUS_DPS)) {
|
|
puts ("Block locked.\n");
|
|
retcode = ERR_PROTECTED;
|
|
}
|
|
if (flash_isset (info, sector, 0, FLASH_STATUS_VPENS))
|
|
puts ("Vpp Low Error.\n");
|
|
}
|
|
flash_write_cmd (info, sector, 0, info->cmd_reset);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
return retcode;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c)
|
|
{
|
|
#if defined(__LITTLE_ENDIAN) && !defined(CFG_WRITE_SWAPPED_DATA)
|
|
unsigned short w;
|
|
unsigned int l;
|
|
unsigned long long ll;
|
|
#endif
|
|
|
|
switch (info->portwidth) {
|
|
case FLASH_CFI_8BIT:
|
|
cword->c = c;
|
|
break;
|
|
case FLASH_CFI_16BIT:
|
|
#if defined(__LITTLE_ENDIAN) && !defined(CFG_WRITE_SWAPPED_DATA)
|
|
w = c;
|
|
w <<= 8;
|
|
cword->w = (cword->w >> 8) | w;
|
|
#else
|
|
cword->w = (cword->w << 8) | c;
|
|
#endif
|
|
break;
|
|
case FLASH_CFI_32BIT:
|
|
#if defined(__LITTLE_ENDIAN) && !defined(CFG_WRITE_SWAPPED_DATA)
|
|
l = c;
|
|
l <<= 24;
|
|
cword->l = (cword->l >> 8) | l;
|
|
#else
|
|
cword->l = (cword->l << 8) | c;
|
|
#endif
|
|
break;
|
|
case FLASH_CFI_64BIT:
|
|
#if defined(__LITTLE_ENDIAN) && !defined(CFG_WRITE_SWAPPED_DATA)
|
|
ll = c;
|
|
ll <<= 56;
|
|
cword->ll = (cword->ll >> 8) | ll;
|
|
#else
|
|
cword->ll = (cword->ll << 8) | c;
|
|
#endif
|
|
break;
|
|
}
|
|
}
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* make a proper sized command based on the port and chip widths
|
|
*/
|
|
static void flash_make_cmd (flash_info_t * info, uchar cmd, void *cmdbuf)
|
|
{
|
|
int i;
|
|
uchar *cp = (uchar *) cmdbuf;
|
|
|
|
#if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA)
|
|
for (i = info->portwidth; i > 0; i--)
|
|
#else
|
|
for (i = 1; i <= info->portwidth; i++)
|
|
#endif
|
|
*cp++ = (i & (info->chipwidth - 1)) ? '\0' : cmd;
|
|
}
|
|
|
|
/*
|
|
* Write a proper sized command to the correct address
|
|
*/
|
|
static void flash_write_cmd (flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd)
|
|
{
|
|
|
|
volatile cfiptr_t addr;
|
|
cfiword_t cword;
|
|
|
|
addr.cp = flash_make_addr (info, sect, offset);
|
|
flash_make_cmd (info, cmd, &cword);
|
|
switch (info->portwidth) {
|
|
case FLASH_CFI_8BIT:
|
|
debug ("fwc addr %p cmd %x %x 8bit x %d bit\n", addr.cp, cmd,
|
|
cword.c, info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
|
|
*addr.cp = cword.c;
|
|
break;
|
|
case FLASH_CFI_16BIT:
|
|
debug ("fwc addr %p cmd %x %4.4x 16bit x %d bit\n", addr.wp,
|
|
cmd, cword.w,
|
|
info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
|
|
*addr.wp = cword.w;
|
|
break;
|
|
case FLASH_CFI_32BIT:
|
|
debug ("fwc addr %p cmd %x %8.8lx 32bit x %d bit\n", addr.lp,
|
|
cmd, cword.l,
|
|
info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
|
|
*addr.lp = cword.l;
|
|
break;
|
|
case FLASH_CFI_64BIT:
|
|
#ifdef DEBUG
|
|
{
|
|
char str[20];
|
|
|
|
print_longlong (str, cword.ll);
|
|
|
|
debug ("fwrite addr %p cmd %x %s 64 bit x %d bit\n",
|
|
addr.llp, cmd, str,
|
|
info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
|
|
}
|
|
#endif
|
|
*addr.llp = cword.ll;
|
|
break;
|
|
}
|
|
|
|
/* Ensure all the instructions are fully finished */
|
|
sync();
|
|
}
|
|
|
|
static void flash_unlock_seq (flash_info_t * info, flash_sect_t sect)
|
|
{
|
|
flash_write_cmd (info, sect, AMD_ADDR_START, AMD_CMD_UNLOCK_START);
|
|
flash_write_cmd (info, sect, AMD_ADDR_ACK, AMD_CMD_UNLOCK_ACK);
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
static int flash_isequal (flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd)
|
|
{
|
|
cfiptr_t cptr;
|
|
cfiword_t cword;
|
|
int retval;
|
|
|
|
cptr.cp = flash_make_addr (info, sect, offset);
|
|
flash_make_cmd (info, cmd, &cword);
|
|
|
|
debug ("is= cmd %x(%c) addr %p ", cmd, cmd, cptr.cp);
|
|
switch (info->portwidth) {
|
|
case FLASH_CFI_8BIT:
|
|
debug ("is= %x %x\n", cptr.cp[0], cword.c);
|
|
retval = (cptr.cp[0] == cword.c);
|
|
break;
|
|
case FLASH_CFI_16BIT:
|
|
debug ("is= %4.4x %4.4x\n", cptr.wp[0], cword.w);
|
|
retval = (cptr.wp[0] == cword.w);
|
|
break;
|
|
case FLASH_CFI_32BIT:
|
|
debug ("is= %8.8lx %8.8lx\n", cptr.lp[0], cword.l);
|
|
retval = (cptr.lp[0] == cword.l);
|
|
break;
|
|
case FLASH_CFI_64BIT:
|
|
#ifdef DEBUG
|
|
{
|
|
char str1[20];
|
|
char str2[20];
|
|
|
|
print_longlong (str1, cptr.llp[0]);
|
|
print_longlong (str2, cword.ll);
|
|
debug ("is= %s %s\n", str1, str2);
|
|
}
|
|
#endif
|
|
retval = (cptr.llp[0] == cword.ll);
|
|
break;
|
|
default:
|
|
retval = 0;
|
|
break;
|
|
}
|
|
return retval;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
static int flash_isset (flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd)
|
|
{
|
|
cfiptr_t cptr;
|
|
cfiword_t cword;
|
|
int retval;
|
|
|
|
cptr.cp = flash_make_addr (info, sect, offset);
|
|
flash_make_cmd (info, cmd, &cword);
|
|
switch (info->portwidth) {
|
|
case FLASH_CFI_8BIT:
|
|
retval = ((cptr.cp[0] & cword.c) == cword.c);
|
|
break;
|
|
case FLASH_CFI_16BIT:
|
|
retval = ((cptr.wp[0] & cword.w) == cword.w);
|
|
break;
|
|
case FLASH_CFI_32BIT:
|
|
retval = ((cptr.lp[0] & cword.l) == cword.l);
|
|
break;
|
|
case FLASH_CFI_64BIT:
|
|
retval = ((cptr.llp[0] & cword.ll) == cword.ll);
|
|
break;
|
|
default:
|
|
retval = 0;
|
|
break;
|
|
}
|
|
return retval;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
static int flash_toggle (flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd)
|
|
{
|
|
cfiptr_t cptr;
|
|
cfiword_t cword;
|
|
int retval;
|
|
|
|
cptr.cp = flash_make_addr (info, sect, offset);
|
|
flash_make_cmd (info, cmd, &cword);
|
|
switch (info->portwidth) {
|
|
case FLASH_CFI_8BIT:
|
|
retval = ((cptr.cp[0] & cword.c) != (cptr.cp[0] & cword.c));
|
|
break;
|
|
case FLASH_CFI_16BIT:
|
|
retval = ((cptr.wp[0] & cword.w) != (cptr.wp[0] & cword.w));
|
|
break;
|
|
case FLASH_CFI_32BIT:
|
|
retval = ((cptr.lp[0] & cword.l) != (cptr.lp[0] & cword.l));
|
|
break;
|
|
case FLASH_CFI_64BIT:
|
|
retval = ((cptr.llp[0] & cword.ll) !=
|
|
(cptr.llp[0] & cword.ll));
|
|
break;
|
|
default:
|
|
retval = 0;
|
|
break;
|
|
}
|
|
return retval;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* read jedec ids from device and set corresponding fields in info struct
|
|
*
|
|
* Note: assume cfi->vendor, cfi->portwidth and cfi->chipwidth are correct
|
|
*
|
|
*/
|
|
static void flash_read_jedec_ids (flash_info_t * info)
|
|
{
|
|
info->manufacturer_id = 0;
|
|
info->device_id = 0;
|
|
info->device_id2 = 0;
|
|
|
|
switch (info->vendor) {
|
|
case CFI_CMDSET_INTEL_STANDARD:
|
|
case CFI_CMDSET_INTEL_EXTENDED:
|
|
flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
|
|
flash_write_cmd(info, 0, 0, FLASH_CMD_READ_ID);
|
|
udelay(1000); /* some flash are slow to respond */
|
|
info->manufacturer_id = flash_read_uchar (info,
|
|
FLASH_OFFSET_MANUFACTURER_ID);
|
|
info->device_id = flash_read_uchar (info,
|
|
FLASH_OFFSET_DEVICE_ID);
|
|
flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
|
|
break;
|
|
case CFI_CMDSET_AMD_STANDARD:
|
|
case CFI_CMDSET_AMD_EXTENDED:
|
|
flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
|
|
flash_unlock_seq(info, 0);
|
|
flash_write_cmd(info, 0, AMD_ADDR_START, FLASH_CMD_READ_ID);
|
|
udelay(1000); /* some flash are slow to respond */
|
|
info->manufacturer_id = flash_read_uchar (info,
|
|
FLASH_OFFSET_MANUFACTURER_ID);
|
|
info->device_id = flash_read_uchar (info,
|
|
FLASH_OFFSET_DEVICE_ID);
|
|
if (info->device_id == 0x7E) {
|
|
/* AMD 3-byte (expanded) device ids */
|
|
info->device_id2 = flash_read_uchar (info,
|
|
FLASH_OFFSET_DEVICE_ID2);
|
|
info->device_id2 <<= 8;
|
|
info->device_id2 |= flash_read_uchar (info,
|
|
FLASH_OFFSET_DEVICE_ID3);
|
|
}
|
|
flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* detect if flash is compatible with the Common Flash Interface (CFI)
|
|
* http://www.jedec.org/download/search/jesd68.pdf
|
|
*
|
|
*/
|
|
static int flash_detect_cfi (flash_info_t * info)
|
|
{
|
|
int cfi_offset;
|
|
debug ("flash detect cfi\n");
|
|
|
|
for (info->portwidth = CFG_FLASH_CFI_WIDTH;
|
|
info->portwidth <= FLASH_CFI_64BIT; info->portwidth <<= 1) {
|
|
for (info->chipwidth = FLASH_CFI_BY8;
|
|
info->chipwidth <= info->portwidth;
|
|
info->chipwidth <<= 1) {
|
|
flash_write_cmd (info, 0, 0, info->cmd_reset);
|
|
for (cfi_offset=0; cfi_offset < sizeof(flash_offset_cfi)/sizeof(uint); cfi_offset++) {
|
|
flash_write_cmd (info, 0, flash_offset_cfi[cfi_offset], FLASH_CMD_CFI);
|
|
if (flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP, 'Q')
|
|
&& flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP + 1, 'R')
|
|
&& flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP + 2, 'Y')) {
|
|
info->interface = flash_read_ushort (info, 0, FLASH_OFFSET_INTERFACE);
|
|
info->cfi_offset=flash_offset_cfi[cfi_offset];
|
|
debug ("device interface is %d\n",
|
|
info->interface);
|
|
debug ("found port %d chip %d ",
|
|
info->portwidth, info->chipwidth);
|
|
debug ("port %d bits chip %d bits\n",
|
|
info->portwidth << CFI_FLASH_SHIFT_WIDTH,
|
|
info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
|
|
return 1;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
debug ("not found\n");
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* The following code cannot be run from FLASH!
|
|
*
|
|
*/
|
|
ulong flash_get_size (ulong base, int banknum)
|
|
{
|
|
flash_info_t *info = &flash_info[banknum];
|
|
int i, j;
|
|
flash_sect_t sect_cnt;
|
|
unsigned long sector;
|
|
unsigned long tmp;
|
|
int size_ratio;
|
|
uchar num_erase_regions;
|
|
int erase_region_size;
|
|
int erase_region_count;
|
|
int geometry_reversed = 0;
|
|
|
|
info->ext_addr = 0;
|
|
info->cfi_version = 0;
|
|
#ifdef CFG_FLASH_PROTECTION
|
|
info->legacy_unlock = 0;
|
|
#endif
|
|
|
|
info->start[0] = base;
|
|
|
|
if (flash_detect_cfi (info)) {
|
|
info->vendor = flash_read_ushort (info, 0,
|
|
FLASH_OFFSET_PRIMARY_VENDOR);
|
|
flash_read_jedec_ids (info);
|
|
flash_write_cmd (info, 0, info->cfi_offset, FLASH_CMD_CFI);
|
|
num_erase_regions = flash_read_uchar (info,
|
|
FLASH_OFFSET_NUM_ERASE_REGIONS);
|
|
info->ext_addr = flash_read_ushort (info, 0,
|
|
FLASH_OFFSET_EXT_QUERY_T_P_ADDR);
|
|
if (info->ext_addr) {
|
|
info->cfi_version = (ushort) flash_read_uchar (info,
|
|
info->ext_addr + 3) << 8;
|
|
info->cfi_version |= (ushort) flash_read_uchar (info,
|
|
info->ext_addr + 4);
|
|
}
|
|
#ifdef DEBUG
|
|
flash_printqry (info, 0);
|
|
#endif
|
|
switch (info->vendor) {
|
|
case CFI_CMDSET_INTEL_STANDARD:
|
|
case CFI_CMDSET_INTEL_EXTENDED:
|
|
default:
|
|
info->cmd_reset = FLASH_CMD_RESET;
|
|
#ifdef CFG_FLASH_PROTECTION
|
|
/* read legacy lock/unlock bit from intel flash */
|
|
if (info->ext_addr) {
|
|
info->legacy_unlock = flash_read_uchar (info,
|
|
info->ext_addr + 5) & 0x08;
|
|
}
|
|
#endif
|
|
break;
|
|
case CFI_CMDSET_AMD_STANDARD:
|
|
case CFI_CMDSET_AMD_EXTENDED:
|
|
info->cmd_reset = AMD_CMD_RESET;
|
|
/* check if flash geometry needs reversal */
|
|
if (num_erase_regions <= 1)
|
|
break;
|
|
/* reverse geometry if top boot part */
|
|
if (info->cfi_version < 0x3131) {
|
|
/* CFI < 1.1, try to guess from device id */
|
|
if ((info->device_id & 0x80) != 0) {
|
|
geometry_reversed = 1;
|
|
}
|
|
break;
|
|
}
|
|
/* CFI >= 1.1, deduct from top/bottom flag */
|
|
/* note: ext_addr is valid since cfi_version > 0 */
|
|
if (flash_read_uchar(info, info->ext_addr + 0xf) == 3) {
|
|
geometry_reversed = 1;
|
|
}
|
|
break;
|
|
}
|
|
|
|
debug ("manufacturer is %d\n", info->vendor);
|
|
debug ("manufacturer id is 0x%x\n", info->manufacturer_id);
|
|
debug ("device id is 0x%x\n", info->device_id);
|
|
debug ("device id2 is 0x%x\n", info->device_id2);
|
|
debug ("cfi version is 0x%04x\n", info->cfi_version);
|
|
|
|
size_ratio = info->portwidth / info->chipwidth;
|
|
/* if the chip is x8/x16 reduce the ratio by half */
|
|
if ((info->interface == FLASH_CFI_X8X16)
|
|
&& (info->chipwidth == FLASH_CFI_BY8)) {
|
|
size_ratio >>= 1;
|
|
}
|
|
debug ("size_ratio %d port %d bits chip %d bits\n",
|
|
size_ratio, info->portwidth << CFI_FLASH_SHIFT_WIDTH,
|
|
info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
|
|
debug ("found %d erase regions\n", num_erase_regions);
|
|
sect_cnt = 0;
|
|
sector = base;
|
|
for (i = 0; i < num_erase_regions; i++) {
|
|
if (i > NUM_ERASE_REGIONS) {
|
|
printf ("%d erase regions found, only %d used\n",
|
|
num_erase_regions, NUM_ERASE_REGIONS);
|
|
break;
|
|
}
|
|
if (geometry_reversed)
|
|
tmp = flash_read_long (info, 0,
|
|
FLASH_OFFSET_ERASE_REGIONS +
|
|
(num_erase_regions - 1 - i) * 4);
|
|
else
|
|
tmp = flash_read_long (info, 0,
|
|
FLASH_OFFSET_ERASE_REGIONS +
|
|
i * 4);
|
|
erase_region_size =
|
|
(tmp & 0xffff) ? ((tmp & 0xffff) * 256) : 128;
|
|
tmp >>= 16;
|
|
erase_region_count = (tmp & 0xffff) + 1;
|
|
debug ("erase_region_count = %d erase_region_size = %d\n",
|
|
erase_region_count, erase_region_size);
|
|
for (j = 0; j < erase_region_count; j++) {
|
|
info->start[sect_cnt] = sector;
|
|
sector += (erase_region_size * size_ratio);
|
|
|
|
/*
|
|
* Only read protection status from supported devices (intel...)
|
|
*/
|
|
switch (info->vendor) {
|
|
case CFI_CMDSET_INTEL_EXTENDED:
|
|
case CFI_CMDSET_INTEL_STANDARD:
|
|
info->protect[sect_cnt] =
|
|
flash_isset (info, sect_cnt,
|
|
FLASH_OFFSET_PROTECT,
|
|
FLASH_STATUS_PROTECT);
|
|
break;
|
|
default:
|
|
info->protect[sect_cnt] = 0; /* default: not protected */
|
|
}
|
|
|
|
sect_cnt++;
|
|
}
|
|
}
|
|
|
|
info->sector_count = sect_cnt;
|
|
/* multiply the size by the number of chips */
|
|
info->size = (1 << flash_read_uchar (info, FLASH_OFFSET_SIZE)) * size_ratio;
|
|
info->buffer_size = (1 << flash_read_ushort (info, 0, FLASH_OFFSET_BUFFER_SIZE));
|
|
tmp = 1 << flash_read_uchar (info, FLASH_OFFSET_ETOUT);
|
|
info->erase_blk_tout = (tmp * (1 << flash_read_uchar (info, FLASH_OFFSET_EMAX_TOUT)));
|
|
tmp = (1 << flash_read_uchar (info, FLASH_OFFSET_WBTOUT)) *
|
|
(1 << flash_read_uchar (info, FLASH_OFFSET_WBMAX_TOUT));
|
|
info->buffer_write_tout = tmp / 1000 + (tmp % 1000 ? 1 : 0); /* round up when converting to ms */
|
|
tmp = (1 << flash_read_uchar (info, FLASH_OFFSET_WTOUT)) *
|
|
(1 << flash_read_uchar (info, FLASH_OFFSET_WMAX_TOUT));
|
|
info->write_tout = tmp / 1000 + (tmp % 1000 ? 1 : 0); /* round up when converting to ms */
|
|
info->flash_id = FLASH_MAN_CFI;
|
|
if ((info->interface == FLASH_CFI_X8X16) && (info->chipwidth == FLASH_CFI_BY8)) {
|
|
info->portwidth >>= 1; /* XXX - Need to test on x8/x16 in parallel. */
|
|
}
|
|
}
|
|
|
|
flash_write_cmd (info, 0, 0, info->cmd_reset);
|
|
return (info->size);
|
|
}
|
|
|
|
/* loop through the sectors from the highest address
|
|
* when the passed address is greater or equal to the sector address
|
|
* we have a match
|
|
*/
|
|
static flash_sect_t find_sector (flash_info_t * info, ulong addr)
|
|
{
|
|
flash_sect_t sector;
|
|
|
|
for (sector = info->sector_count - 1; sector >= 0; sector--) {
|
|
if (addr >= info->start[sector])
|
|
break;
|
|
}
|
|
return sector;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
static int flash_write_cfiword (flash_info_t * info, ulong dest,
|
|
cfiword_t cword)
|
|
{
|
|
cfiptr_t ctladdr;
|
|
cfiptr_t cptr;
|
|
int flag;
|
|
|
|
ctladdr.cp = flash_make_addr (info, 0, 0);
|
|
cptr.cp = (uchar *) dest;
|
|
|
|
/* Check if Flash is (sufficiently) erased */
|
|
switch (info->portwidth) {
|
|
case FLASH_CFI_8BIT:
|
|
flag = ((cptr.cp[0] & cword.c) == cword.c);
|
|
break;
|
|
case FLASH_CFI_16BIT:
|
|
flag = ((cptr.wp[0] & cword.w) == cword.w);
|
|
break;
|
|
case FLASH_CFI_32BIT:
|
|
flag = ((cptr.lp[0] & cword.l) == cword.l);
|
|
break;
|
|
case FLASH_CFI_64BIT:
|
|
flag = ((cptr.llp[0] & cword.ll) == cword.ll);
|
|
break;
|
|
default:
|
|
return 2;
|
|
}
|
|
if (!flag)
|
|
return 2;
|
|
|
|
/* Disable interrupts which might cause a timeout here */
|
|
flag = disable_interrupts ();
|
|
|
|
switch (info->vendor) {
|
|
case CFI_CMDSET_INTEL_EXTENDED:
|
|
case CFI_CMDSET_INTEL_STANDARD:
|
|
flash_write_cmd (info, 0, 0, FLASH_CMD_CLEAR_STATUS);
|
|
flash_write_cmd (info, 0, 0, FLASH_CMD_WRITE);
|
|
break;
|
|
case CFI_CMDSET_AMD_EXTENDED:
|
|
case CFI_CMDSET_AMD_STANDARD:
|
|
flash_unlock_seq (info, 0);
|
|
flash_write_cmd (info, 0, AMD_ADDR_START, AMD_CMD_WRITE);
|
|
break;
|
|
}
|
|
|
|
switch (info->portwidth) {
|
|
case FLASH_CFI_8BIT:
|
|
cptr.cp[0] = cword.c;
|
|
break;
|
|
case FLASH_CFI_16BIT:
|
|
cptr.wp[0] = cword.w;
|
|
break;
|
|
case FLASH_CFI_32BIT:
|
|
cptr.lp[0] = cword.l;
|
|
break;
|
|
case FLASH_CFI_64BIT:
|
|
cptr.llp[0] = cword.ll;
|
|
break;
|
|
}
|
|
|
|
/* re-enable interrupts if necessary */
|
|
if (flag)
|
|
enable_interrupts ();
|
|
|
|
return flash_full_status_check (info, find_sector (info, dest),
|
|
info->write_tout, "write");
|
|
}
|
|
|
|
#ifdef CFG_FLASH_USE_BUFFER_WRITE
|
|
|
|
static int flash_write_cfibuffer (flash_info_t * info, ulong dest, uchar * cp,
|
|
int len)
|
|
{
|
|
flash_sect_t sector;
|
|
int cnt;
|
|
int retcode;
|
|
volatile cfiptr_t src;
|
|
volatile cfiptr_t dst;
|
|
|
|
switch (info->vendor) {
|
|
case CFI_CMDSET_INTEL_STANDARD:
|
|
case CFI_CMDSET_INTEL_EXTENDED:
|
|
src.cp = cp;
|
|
dst.cp = (uchar *) dest;
|
|
sector = find_sector (info, dest);
|
|
flash_write_cmd (info, sector, 0, FLASH_CMD_CLEAR_STATUS);
|
|
flash_write_cmd (info, sector, 0, FLASH_CMD_WRITE_TO_BUFFER);
|
|
if ((retcode = flash_status_check (info, sector, info->buffer_write_tout,
|
|
"write to buffer")) == ERR_OK) {
|
|
/* reduce the number of loops by the width of the port */
|
|
switch (info->portwidth) {
|
|
case FLASH_CFI_8BIT:
|
|
cnt = len;
|
|
break;
|
|
case FLASH_CFI_16BIT:
|
|
cnt = len >> 1;
|
|
break;
|
|
case FLASH_CFI_32BIT:
|
|
cnt = len >> 2;
|
|
break;
|
|
case FLASH_CFI_64BIT:
|
|
cnt = len >> 3;
|
|
break;
|
|
default:
|
|
return ERR_INVAL;
|
|
break;
|
|
}
|
|
flash_write_cmd (info, sector, 0, (uchar) cnt - 1);
|
|
while (cnt-- > 0) {
|
|
switch (info->portwidth) {
|
|
case FLASH_CFI_8BIT:
|
|
*dst.cp++ = *src.cp++;
|
|
break;
|
|
case FLASH_CFI_16BIT:
|
|
*dst.wp++ = *src.wp++;
|
|
break;
|
|
case FLASH_CFI_32BIT:
|
|
*dst.lp++ = *src.lp++;
|
|
break;
|
|
case FLASH_CFI_64BIT:
|
|
*dst.llp++ = *src.llp++;
|
|
break;
|
|
default:
|
|
return ERR_INVAL;
|
|
break;
|
|
}
|
|
}
|
|
flash_write_cmd (info, sector, 0,
|
|
FLASH_CMD_WRITE_BUFFER_CONFIRM);
|
|
retcode = flash_full_status_check (info, sector,
|
|
info->buffer_write_tout,
|
|
"buffer write");
|
|
}
|
|
return retcode;
|
|
|
|
case CFI_CMDSET_AMD_STANDARD:
|
|
case CFI_CMDSET_AMD_EXTENDED:
|
|
src.cp = cp;
|
|
dst.cp = (uchar *) dest;
|
|
sector = find_sector (info, dest);
|
|
|
|
flash_unlock_seq(info,0);
|
|
flash_write_cmd (info, sector, 0, AMD_CMD_WRITE_TO_BUFFER);
|
|
|
|
switch (info->portwidth) {
|
|
case FLASH_CFI_8BIT:
|
|
cnt = len;
|
|
flash_write_cmd (info, sector, 0, (uchar) cnt - 1);
|
|
while (cnt-- > 0) *dst.cp++ = *src.cp++;
|
|
break;
|
|
case FLASH_CFI_16BIT:
|
|
cnt = len >> 1;
|
|
flash_write_cmd (info, sector, 0, (uchar) cnt - 1);
|
|
while (cnt-- > 0) *dst.wp++ = *src.wp++;
|
|
break;
|
|
case FLASH_CFI_32BIT:
|
|
cnt = len >> 2;
|
|
flash_write_cmd (info, sector, 0, (uchar) cnt - 1);
|
|
while (cnt-- > 0) *dst.lp++ = *src.lp++;
|
|
break;
|
|
case FLASH_CFI_64BIT:
|
|
cnt = len >> 3;
|
|
flash_write_cmd (info, sector, 0, (uchar) cnt - 1);
|
|
while (cnt-- > 0) *dst.llp++ = *src.llp++;
|
|
break;
|
|
default:
|
|
return ERR_INVAL;
|
|
}
|
|
|
|
flash_write_cmd (info, sector, 0, AMD_CMD_WRITE_BUFFER_CONFIRM);
|
|
retcode = flash_full_status_check (info, sector, info->buffer_write_tout,
|
|
"buffer write");
|
|
return retcode;
|
|
|
|
default:
|
|
debug ("Unknown Command Set\n");
|
|
return ERR_INVAL;
|
|
}
|
|
}
|
|
#endif /* CFG_FLASH_USE_BUFFER_WRITE */
|
|
|
|
#endif /* CFG_FLASH_CFI */
|