u-boot

mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-15 01:17:39 +00:00

History

Nishanth Menon a94a4071d4 tree-wide: Replace http:// link with https:// link for ti.com Replace instances of http://www.ti.com with https://www.ti.com Signed-off-by: Nishanth Menon <nm@ti.com>		2023-11-10 11:01:50 -05:00
..
board.c	tree-wide: Replace http:// link with https:// link for ti.com	2023-11-10 11:01:50 -05:00
Kconfig	board/chiliboard: Add support for chiliBoard	2017-01-28 14:04:37 -05:00
MAINTAINERS	board/chiliboard: Add support for chiliBoard	2017-01-28 14:04:37 -05:00
Makefile	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
README	board/chiliboard: Add support for chiliBoard	2017-01-28 14:04:37 -05:00

README

How to use U-Boot on Grinn's chiliBoard
--------------------------------------

- Build U-Boot for chiliBoard:

$ make mrproper
$ make chiliboard_defconfig
$ make

This will generate the SPL image called MLO and the u-boot.img.

- Flash the SPL image into the micro SD card:

sudo dd if=MLO of=/dev/mmcblk0 bs=128k; sync

- Flash the u-boot.img image into the micro SD card:

sudo dd if=u-boot.img of=/dev/mmcblk0 bs=128k seek=3; sync

- Jumper settings:

S2: 1 1 1 0 1 0

where 0 means bottom position and 1 means top position (from the
switch label numbers reference).

- Insert the micro SD card in the board.

- Connect USB cable between chiliBoard and the PC for the power and console.

- U-Boot messages should come up.