mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-06 21:24:29 +00:00
4687919684
When a driver declares DM_FLAG_PRE_RELOC flag, it wishes to be bound before relocation. However due to a bug in the DM core, the flag only takes effect when devices are statically declared via U_BOOT_DEVICE(). This bug has been fixed recently by commit "dm: core: Respect drivers with the DM_FLAG_PRE_RELOC flag in lists_bind_fdt()", but with the fix, it has a side effect that all existing drivers that declared DM_FLAG_PRE_RELOC flag will be bound before relocation now. This may expose potential boot failure on some boards due to insufficient memory during the pre-relocation stage. To mitigate this potential impact, the following changes are implemented: - Remove DM_FLAG_PRE_RELOC flag in the driver, if the driver only supports configuration from device tree (OF_CONTROL) - Keep DM_FLAG_PRE_RELOC flag in the driver only if the device is statically declared via U_BOOT_DEVICE() - Surround DM_FLAG_PRE_RELOC flag with OF_CONTROL check, for drivers that support both statically declared devices and configuration from device tree Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
67 lines
1.5 KiB
C
67 lines
1.5 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (c) 2017 Intel Corporation
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <ns16550.h>
|
|
#include <serial.h>
|
|
|
|
/*
|
|
* The UART clock is calculated as
|
|
*
|
|
* UART clock = XTAL * UART_MUL / UART_DIV
|
|
*
|
|
* The baudrate is calculated as
|
|
*
|
|
* baud rate = UART clock / UART_PS / DLAB
|
|
*/
|
|
#define UART_PS 0x30
|
|
#define UART_MUL 0x34
|
|
#define UART_DIV 0x38
|
|
|
|
static void mid_writel(struct ns16550_platdata *plat, int offset, int value)
|
|
{
|
|
unsigned char *addr;
|
|
|
|
offset *= 1 << plat->reg_shift;
|
|
addr = (unsigned char *)plat->base + offset;
|
|
|
|
writel(value, addr + plat->reg_offset);
|
|
}
|
|
|
|
static int mid_serial_probe(struct udevice *dev)
|
|
{
|
|
struct ns16550_platdata *plat = dev_get_platdata(dev);
|
|
|
|
/*
|
|
* Initialize fractional divider correctly for Intel Edison
|
|
* platform.
|
|
*
|
|
* For backward compatibility we have to set initial DLAB value
|
|
* to 16 and speed to 115200 baud, where initial frequency is
|
|
* 29491200Hz, and XTAL frequency is 38.4MHz.
|
|
*/
|
|
mid_writel(plat, UART_MUL, 96);
|
|
mid_writel(plat, UART_DIV, 125);
|
|
mid_writel(plat, UART_PS, 16);
|
|
|
|
return ns16550_serial_probe(dev);
|
|
}
|
|
|
|
static const struct udevice_id mid_serial_ids[] = {
|
|
{ .compatible = "intel,mid-uart" },
|
|
{}
|
|
};
|
|
|
|
U_BOOT_DRIVER(serial_intel_mid) = {
|
|
.name = "serial_intel_mid",
|
|
.id = UCLASS_SERIAL,
|
|
.of_match = mid_serial_ids,
|
|
.ofdata_to_platdata = ns16550_serial_ofdata_to_platdata,
|
|
.platdata_auto_alloc_size = sizeof(struct ns16550_platdata),
|
|
.priv_auto_alloc_size = sizeof(struct NS16550),
|
|
.probe = mid_serial_probe,
|
|
.ops = &ns16550_serial_ops,
|
|
};
|