u-boot/arch/arm/dts/imx93-11x11-evk-u-boot.dtsi
Simon Glass 8c103c33fb dm: dts: Convert driver model tags to use new schema
Now that Linux has accepted these tags, move the device tree files in
U-Boot over to use them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-14 09:43:26 -07:00

157 lines
1.9 KiB
Text

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2022 NXP
*/
/ {
wdt-reboot {
compatible = "wdt-reboot";
wdt = <&wdog3>;
bootph-pre-ram;
};
aliases {
usbgadget0 = &usbg1;
usbgadget1 = &usbg2;
};
usbg1: usbg1 {
compatible = "fsl,imx27-usb-gadget";
dr_mode = "peripheral";
chipidea,usb = <&usbotg1>;
status = "okay";
};
usbg2: usbg2 {
compatible = "fsl,imx27-usb-gadget";
dr_mode = "peripheral";
chipidea,usb = <&usbotg2>;
status = "okay";
};
firmware {
optee {
compatible = "linaro,optee-tz";
method = "smc";
};
};
};
&{/soc@0} {
bootph-all;
bootph-pre-ram;
};
&aips1 {
bootph-pre-ram;
bootph-all;
};
&aips2 {
bootph-pre-ram;
};
&aips3 {
bootph-pre-ram;
};
&iomuxc {
bootph-pre-ram;
};
&reg_usdhc2_vmmc {
u-boot,off-on-delay-us = <20000>;
bootph-pre-ram;
};
&pinctrl_reg_usdhc2_vmmc {
bootph-pre-ram;
};
&pinctrl_uart1 {
bootph-pre-ram;
};
&pinctrl_usdhc2_gpio {
bootph-pre-ram;
};
&pinctrl_usdhc2 {
bootph-pre-ram;
};
&gpio1 {
bootph-pre-ram;
};
&gpio2 {
bootph-pre-ram;
};
&gpio3 {
bootph-pre-ram;
};
&gpio4 {
bootph-pre-ram;
};
&lpuart1 {
bootph-pre-ram;
};
&usdhc1 {
bootph-pre-ram;
};
&usdhc2 {
bootph-pre-ram;
fsl,signal-voltage-switch-extra-delay-ms = <8>;
};
&lpi2c2 {
bootph-pre-ram;
};
&{/soc@0/bus@44000000/i2c@44350000/pmic@25} {
bootph-pre-ram;
};
&{/soc@0/bus@44000000/i2c@44350000/pmic@25/regulators} {
bootph-pre-ram;
};
&pinctrl_lpi2c2 {
bootph-pre-ram;
};
&fec {
phy-reset-gpios = <&pcal6524 16 GPIO_ACTIVE_LOW>;
phy-reset-duration = <15>;
phy-reset-post-delay = <100>;
};
&eqos {
compatible = "fsl,imx-eqos";
};
&ethphy1 {
reset-gpios = <&pcal6524 15 GPIO_ACTIVE_LOW>;
reset-assert-us = <15000>;
reset-deassert-us = <100000>;
};
&usbotg1 {
status = "okay";
extcon = <&ptn5110>;
};
&usbotg2 {
status = "okay";
extcon = <&ptn5110_2>;
};
&s4muap {
bootph-pre-ram;
status = "okay";
};