u-boot/arch/arm/mach-rockchip/rk3288-board.c
Jacob Chen 67171e13a3 rockchip: add boot-mode support for rk3288, rk3036
rockchip platform have a protocol to pass the the kernel reboot mode to bootloader
by some special registers when system reboot. In bootloader we should read it and take action.

We can only setup boot_mode in board_late_init becasue "setenv" need env setuped.
So add CONFIG_BOARD_LATE_INIT to common header and use a entry "rk_board_late_init"
to replace "board_late_init" in board file.

Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-10-01 18:36:55 -06:00

245 lines
4.7 KiB
C

/*
* (C) Copyright 2015 Google, Inc
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <clk.h>
#include <dm.h>
#include <ram.h>
#include <syscon.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/periph.h>
#include <asm/arch/pmu_rk3288.h>
#include <asm/arch/boot_mode.h>
#include <asm/gpio.h>
#include <dm/pinctrl.h>
DECLARE_GLOBAL_DATA_PTR;
#define PMU_BASE 0xff730000
static void setup_boot_mode(void)
{
struct rk3288_pmu *const pmu = (void *)PMU_BASE;
int boot_mode = readl(&pmu->sys_reg[0]);
debug("boot mode %x.\n", boot_mode);
/* Clear boot mode */
writel(BOOT_NORMAL, &pmu->sys_reg[0]);
switch (boot_mode) {
case BOOT_FASTBOOT:
printf("enter fastboot!\n");
setenv("preboot", "setenv preboot; fastboot usb0");
break;
case BOOT_UMS:
printf("enter UMS!\n");
setenv("preboot", "setenv preboot; if mmc dev 0;"
"then ums mmc 0; else ums mmc 1;fi");
break;
}
}
__weak int rk_board_late_init(void)
{
return 0;
}
int board_late_init(void)
{
setup_boot_mode();
return rk_board_late_init();
}
int board_init(void)
{
#ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
struct udevice *pinctrl;
int ret;
/*
* We need to implement sdcard iomux here for the further
* initlization, otherwise, it'll hit sdcard command sending
* timeout exception.
*/
ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl);
if (ret) {
debug("%s: Cannot find pinctrl device\n", __func__);
goto err;
}
ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_SDCARD);
if (ret) {
debug("%s: Failed to set up SD card\n", __func__);
goto err;
}
return 0;
err:
printf("board_init: Error %d\n", ret);
/* No way to report error here */
hang();
return -1;
#else
return 0;
#endif
}
int dram_init(void)
{
struct ram_info ram;
struct udevice *dev;
int ret;
ret = uclass_get_device(UCLASS_RAM, 0, &dev);
if (ret) {
debug("DRAM init failed: %d\n", ret);
return ret;
}
ret = ram_get_info(dev, &ram);
if (ret) {
debug("Cannot get DRAM size: %d\n", ret);
return ret;
}
debug("SDRAM base=%lx, size=%x\n", ram.base, ram.size);
gd->ram_size = ram.size;
return 0;
}
#ifndef CONFIG_SYS_DCACHE_OFF
void enable_caches(void)
{
/* Enable D-cache. I-cache is already enabled in start.S */
dcache_enable();
}
#endif
#if defined(CONFIG_USB_GADGET) && defined(CONFIG_USB_GADGET_DWC2_OTG)
#include <usb.h>
#include <usb/dwc2_udc.h>
static struct dwc2_plat_otg_data rk3288_otg_data = {
.rx_fifo_sz = 512,
.np_tx_fifo_sz = 16,
.tx_fifo_sz = 128,
};
int board_usb_init(int index, enum usb_init_type init)
{
int node, phy_node;
const char *mode;
bool matched = false;
const void *blob = gd->fdt_blob;
u32 grf_phy_offset;
/* find the usb_otg node */
node = fdt_node_offset_by_compatible(blob, -1,
"rockchip,rk3288-usb");
while (node > 0) {
mode = fdt_getprop(blob, node, "dr_mode", NULL);
if (mode && strcmp(mode, "otg") == 0) {
matched = true;
break;
}
node = fdt_node_offset_by_compatible(blob, node,
"rockchip,rk3288-usb");
}
if (!matched) {
debug("Not found usb_otg device\n");
return -ENODEV;
}
rk3288_otg_data.regs_otg = fdtdec_get_addr(blob, node, "reg");
node = fdtdec_lookup_phandle(blob, node, "phys");
if (node <= 0) {
debug("Not found usb phy device\n");
return -ENODEV;
}
phy_node = fdt_parent_offset(blob, node);
if (phy_node <= 0) {
debug("Not found usb phy device\n");
return -ENODEV;
}
rk3288_otg_data.phy_of_node = phy_node;
grf_phy_offset = fdtdec_get_addr(blob, node, "reg");
/* find the grf node */
node = fdt_node_offset_by_compatible(blob, -1,
"rockchip,rk3288-grf");
if (node <= 0) {
debug("Not found grf device\n");
return -ENODEV;
}
rk3288_otg_data.regs_phy = grf_phy_offset +
fdtdec_get_addr(blob, node, "reg");
return dwc2_udc_probe(&rk3288_otg_data);
}
int board_usb_cleanup(int index, enum usb_init_type init)
{
return 0;
}
#endif
static int do_clock(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
{
static const struct {
char *name;
int id;
} clks[] = {
{ "osc", CLK_OSC },
{ "apll", CLK_ARM },
{ "dpll", CLK_DDR },
{ "cpll", CLK_CODEC },
{ "gpll", CLK_GENERAL },
#ifdef CONFIG_ROCKCHIP_RK3036
{ "mpll", CLK_NEW },
#else
{ "npll", CLK_NEW },
#endif
};
int ret, i;
struct udevice *dev;
ret = rockchip_get_clk(&dev);
if (ret) {
printf("clk-uclass not found\n");
return 0;
}
for (i = 0; i < ARRAY_SIZE(clks); i++) {
struct clk clk;
ulong rate;
clk.id = clks[i].id;
ret = clk_request(dev, &clk);
if (ret < 0)
continue;
rate = clk_get_rate(&clk);
printf("%s: %lu\n", clks[i].name, rate);
clk_free(&clk);
}
return 0;
}
U_BOOT_CMD(
clock, 2, 1, do_clock,
"display information about clocks",
""
);