u-boot/include/dt-bindings/pinctrl/k3-am65.h
Lokesh Vutla 853f7f5018 arm64: dts: k3: Add u-boot specific nodes
Add the minimum dt nodes required to boot. These nodes
will get deleted as kernel gets these nodes added in the
main dts files.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-09-11 08:32:55 -04:00

49 lines
1.3 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
/*
* This header provides constants for TI K3-AM65 pinctrl bindings.
*
* Copyright (C) 2018 Texas Instruments
*/
#ifndef _DT_BINDINGS_PINCTRL_TI_K3_AM65_H
#define _DT_BINDINGS_PINCTRL_TI_K3_AM65_H
/* K3 mux mode options for each pin. See TRM for options */
#define MUX_MODE0 0
#define MUX_MODE1 1
#define MUX_MODE2 2
#define MUX_MODE3 3
#define MUX_MODE4 4
#define MUX_MODE5 5
#define MUX_MODE6 6
#define MUX_MODE7 7
#define MUX_MODE15 15
#define PULL_DISABLE (1 << 16)
#define PULL_UP (1 << 17)
#define INPUT_EN (1 << 18)
#define SLEWCTRL_200MHZ 0
#define SLEWCTRL_150MHZ (1 << 19)
#define SLEWCTRL_100MHZ (2 << 19)
#define SLEWCTRL_50MHZ (3 << 19)
#define TX_DIS (1 << 21)
#define ISO_OVR (1 << 22)
#define ISO_BYPASS (1 << 23)
#define DS_EN (1 << 24)
#define DS_INPUT (1 << 25)
#define DS_FORCE_OUT_HIGH (1 << 26)
#define DS_PULL_UP_DOWN_EN 0
#define DS_PULL_UP_DOWN_DIS (1 << 27)
#define DS_PULL_UP_SEL (1 << 28)
#define WAKEUP_ENABLE (1 << 29)
#define PIN_OUTPUT (PULL_DISABLE)
#define PIN_OUTPUT_PULLUP (PULL_UP)
#define PIN_OUTPUT_PULLDOWN 0
#define PIN_INPUT (INPUT_EN | PULL_DISABLE)
#define PIN_INPUT_PULLUP (INPUT_EN | PULL_UP)
#define PIN_INPUT_PULLDOWN (INPUT_EN)
#define AM65X_IOPAD(pa, val) (((pa) & 0x1fff)) (val)
#define AM65X_WKUP_IOPAD(pa, val) (((pa) & 0x1fff)) (val)
#endif