mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
69f78cf840
The existing imx_watchdog driver is compatible with mx25 chipsets. Add a WDOG1_BASE_ADDR define for the base address and enable the driver in watchdog's Makefile. To use the driver, a board must define CONFIG_IMX_WATCHDOG and CONFIG_HW_WATCHDOG. This fixes an issue when booting an mx25 chip via usb/serial. In this case, the boot rom will always enable the watchdog. If u-boot is running in interactive mode and the watchdog is not serviced, the system is rebooted when the watchdog expires. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
25 lines
968 B
Makefile
25 lines
968 B
Makefile
# SPDX-License-Identifier: GPL-2.0+
|
|
#
|
|
# (C) Copyright 2008
|
|
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
|
|
obj-$(CONFIG_AT91SAM9_WATCHDOG) += at91sam9_wdt.o
|
|
obj-$(CONFIG_FTWDT010_WATCHDOG) += ftwdt010_wdt.o
|
|
ifneq (,$(filter $(SOC), mx25 mx31 mx35 mx5 mx6 mx7 vf610))
|
|
obj-y += imx_watchdog.o
|
|
endif
|
|
obj-$(CONFIG_S5P) += s5p_wdt.o
|
|
obj-$(CONFIG_XILINX_TB_WATCHDOG) += xilinx_tb_wdt.o
|
|
obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o
|
|
obj-$(CONFIG_DESIGNWARE_WATCHDOG) += designware_wdt.o
|
|
obj-$(CONFIG_TANGIER_WATCHDOG) += tangier_wdt.o
|
|
obj-$(CONFIG_ULP_WATCHDOG) += ulp_wdog.o
|
|
obj-$(CONFIG_WDT) += wdt-uclass.o
|
|
obj-$(CONFIG_WDT_SANDBOX) += sandbox_wdt.o
|
|
obj-$(CONFIG_WDT_ARMADA_37XX) += armada-37xx-wdt.o
|
|
obj-$(CONFIG_WDT_ASPEED) += ast_wdt.o
|
|
obj-$(CONFIG_WDT_BCM6345) += bcm6345_wdt.o
|
|
obj-$(CONFIG_BCM2835_WDT) += bcm2835_wdt.o
|
|
obj-$(CONFIG_WDT_ORION) += orion_wdt.o
|
|
obj-$(CONFIG_WDT_CDNS) += cdns_wdt.o
|
|
obj-$(CONFIG_MPC8xx_WATCHDOG) += mpc8xx_wdt.o
|