mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
604 lines
14 KiB
C
604 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2000
|
|
* Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it
|
|
*
|
|
* (C) Copyright 2000 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
|
|
* Marius Groeger <mgroeger@sysgo.de>
|
|
*
|
|
* (C) Copyright 2003 Pengutronix e.K.
|
|
* Robert Schwebel <r.schwebel@pengutronix.de>
|
|
*
|
|
* (C) Copyright 2011 Marvell Inc.
|
|
* Lei Wen <leiwen@marvell.com>
|
|
*
|
|
* Back ported to the 8xx platform (from the 8260 platform) by
|
|
* Murray.Jensen@cmst.csiro.au, 27-Jan-01.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <i2c.h>
|
|
#include <asm/io.h>
|
|
#include "mv_i2c.h"
|
|
|
|
/* All transfers are described by this data structure */
|
|
struct mv_i2c_msg {
|
|
u8 condition;
|
|
u8 acknack;
|
|
u8 direction;
|
|
u8 data;
|
|
};
|
|
|
|
#ifdef CONFIG_ARMADA_3700
|
|
/* Armada 3700 has no padding between the registers */
|
|
struct mv_i2c {
|
|
u32 ibmr;
|
|
u32 idbr;
|
|
u32 icr;
|
|
u32 isr;
|
|
u32 isar;
|
|
};
|
|
#else
|
|
struct mv_i2c {
|
|
u32 ibmr;
|
|
u32 pad0;
|
|
u32 idbr;
|
|
u32 pad1;
|
|
u32 icr;
|
|
u32 pad2;
|
|
u32 isr;
|
|
u32 pad3;
|
|
u32 isar;
|
|
};
|
|
#endif
|
|
|
|
/*
|
|
* Dummy implementation that can be overwritten by a board
|
|
* specific function
|
|
*/
|
|
__weak void i2c_clk_enable(void)
|
|
{
|
|
}
|
|
|
|
/*
|
|
* i2c_reset: - reset the host controller
|
|
*
|
|
*/
|
|
static void i2c_reset(struct mv_i2c *base)
|
|
{
|
|
u32 icr_mode;
|
|
|
|
/* Save bus mode (standard or fast speed) for later use */
|
|
icr_mode = readl(&base->icr) & ICR_MODE_MASK;
|
|
writel(readl(&base->icr) & ~ICR_IUE, &base->icr); /* disable unit */
|
|
writel(readl(&base->icr) | ICR_UR, &base->icr); /* reset the unit */
|
|
udelay(100);
|
|
writel(readl(&base->icr) & ~ICR_IUE, &base->icr); /* disable unit */
|
|
|
|
i2c_clk_enable();
|
|
|
|
writel(CONFIG_SYS_I2C_SLAVE, &base->isar); /* set our slave address */
|
|
/* set control reg values */
|
|
writel(I2C_ICR_INIT | icr_mode, &base->icr);
|
|
writel(I2C_ISR_INIT, &base->isr); /* set clear interrupt bits */
|
|
writel(readl(&base->icr) | ICR_IUE, &base->icr); /* enable unit */
|
|
udelay(100);
|
|
}
|
|
|
|
/*
|
|
* i2c_isr_set_cleared: - wait until certain bits of the I2C status register
|
|
* are set and cleared
|
|
*
|
|
* @return: 1 in case of success, 0 means timeout (no match within 10 ms).
|
|
*/
|
|
static int i2c_isr_set_cleared(struct mv_i2c *base, unsigned long set_mask,
|
|
unsigned long cleared_mask)
|
|
{
|
|
int timeout = 1000, isr;
|
|
|
|
do {
|
|
isr = readl(&base->isr);
|
|
udelay(10);
|
|
if (timeout-- < 0)
|
|
return 0;
|
|
} while (((isr & set_mask) != set_mask)
|
|
|| ((isr & cleared_mask) != 0));
|
|
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* i2c_transfer: - Transfer one byte over the i2c bus
|
|
*
|
|
* This function can tranfer a byte over the i2c bus in both directions.
|
|
* It is used by the public API functions.
|
|
*
|
|
* @return: 0: transfer successful
|
|
* -1: message is empty
|
|
* -2: transmit timeout
|
|
* -3: ACK missing
|
|
* -4: receive timeout
|
|
* -5: illegal parameters
|
|
* -6: bus is busy and couldn't be aquired
|
|
*/
|
|
static int i2c_transfer(struct mv_i2c *base, struct mv_i2c_msg *msg)
|
|
{
|
|
int ret;
|
|
|
|
if (!msg)
|
|
goto transfer_error_msg_empty;
|
|
|
|
switch (msg->direction) {
|
|
case I2C_WRITE:
|
|
/* check if bus is not busy */
|
|
if (!i2c_isr_set_cleared(base, 0, ISR_IBB))
|
|
goto transfer_error_bus_busy;
|
|
|
|
/* start transmission */
|
|
writel(readl(&base->icr) & ~ICR_START, &base->icr);
|
|
writel(readl(&base->icr) & ~ICR_STOP, &base->icr);
|
|
writel(msg->data, &base->idbr);
|
|
if (msg->condition == I2C_COND_START)
|
|
writel(readl(&base->icr) | ICR_START, &base->icr);
|
|
if (msg->condition == I2C_COND_STOP)
|
|
writel(readl(&base->icr) | ICR_STOP, &base->icr);
|
|
if (msg->acknack == I2C_ACKNAK_SENDNAK)
|
|
writel(readl(&base->icr) | ICR_ACKNAK, &base->icr);
|
|
if (msg->acknack == I2C_ACKNAK_SENDACK)
|
|
writel(readl(&base->icr) & ~ICR_ACKNAK, &base->icr);
|
|
writel(readl(&base->icr) & ~ICR_ALDIE, &base->icr);
|
|
writel(readl(&base->icr) | ICR_TB, &base->icr);
|
|
|
|
/* transmit register empty? */
|
|
if (!i2c_isr_set_cleared(base, ISR_ITE, 0))
|
|
goto transfer_error_transmit_timeout;
|
|
|
|
/* clear 'transmit empty' state */
|
|
writel(readl(&base->isr) | ISR_ITE, &base->isr);
|
|
|
|
/* wait for ACK from slave */
|
|
if (msg->acknack == I2C_ACKNAK_WAITACK)
|
|
if (!i2c_isr_set_cleared(base, 0, ISR_ACKNAK))
|
|
goto transfer_error_ack_missing;
|
|
break;
|
|
|
|
case I2C_READ:
|
|
|
|
/* check if bus is not busy */
|
|
if (!i2c_isr_set_cleared(base, 0, ISR_IBB))
|
|
goto transfer_error_bus_busy;
|
|
|
|
/* start receive */
|
|
writel(readl(&base->icr) & ~ICR_START, &base->icr);
|
|
writel(readl(&base->icr) & ~ICR_STOP, &base->icr);
|
|
if (msg->condition == I2C_COND_START)
|
|
writel(readl(&base->icr) | ICR_START, &base->icr);
|
|
if (msg->condition == I2C_COND_STOP)
|
|
writel(readl(&base->icr) | ICR_STOP, &base->icr);
|
|
if (msg->acknack == I2C_ACKNAK_SENDNAK)
|
|
writel(readl(&base->icr) | ICR_ACKNAK, &base->icr);
|
|
if (msg->acknack == I2C_ACKNAK_SENDACK)
|
|
writel(readl(&base->icr) & ~ICR_ACKNAK, &base->icr);
|
|
writel(readl(&base->icr) & ~ICR_ALDIE, &base->icr);
|
|
writel(readl(&base->icr) | ICR_TB, &base->icr);
|
|
|
|
/* receive register full? */
|
|
if (!i2c_isr_set_cleared(base, ISR_IRF, 0))
|
|
goto transfer_error_receive_timeout;
|
|
|
|
msg->data = readl(&base->idbr);
|
|
|
|
/* clear 'receive empty' state */
|
|
writel(readl(&base->isr) | ISR_IRF, &base->isr);
|
|
break;
|
|
default:
|
|
goto transfer_error_illegal_param;
|
|
}
|
|
|
|
return 0;
|
|
|
|
transfer_error_msg_empty:
|
|
debug("i2c_transfer: error: 'msg' is empty\n");
|
|
ret = -1;
|
|
goto i2c_transfer_finish;
|
|
|
|
transfer_error_transmit_timeout:
|
|
debug("i2c_transfer: error: transmit timeout\n");
|
|
ret = -2;
|
|
goto i2c_transfer_finish;
|
|
|
|
transfer_error_ack_missing:
|
|
debug("i2c_transfer: error: ACK missing\n");
|
|
ret = -3;
|
|
goto i2c_transfer_finish;
|
|
|
|
transfer_error_receive_timeout:
|
|
debug("i2c_transfer: error: receive timeout\n");
|
|
ret = -4;
|
|
goto i2c_transfer_finish;
|
|
|
|
transfer_error_illegal_param:
|
|
debug("i2c_transfer: error: illegal parameters\n");
|
|
ret = -5;
|
|
goto i2c_transfer_finish;
|
|
|
|
transfer_error_bus_busy:
|
|
debug("i2c_transfer: error: bus is busy\n");
|
|
ret = -6;
|
|
goto i2c_transfer_finish;
|
|
|
|
i2c_transfer_finish:
|
|
debug("i2c_transfer: ISR: 0x%04x\n", readl(&base->isr));
|
|
i2c_reset(base);
|
|
return ret;
|
|
}
|
|
|
|
static int __i2c_read(struct mv_i2c *base, uchar chip, u8 *addr, int alen,
|
|
uchar *buffer, int len)
|
|
{
|
|
struct mv_i2c_msg msg;
|
|
|
|
debug("i2c_read(chip=0x%02x, addr=0x%02x, alen=0x%02x, "
|
|
"len=0x%02x)\n", chip, *addr, alen, len);
|
|
|
|
if (len == 0) {
|
|
printf("reading zero byte is invalid\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
i2c_reset(base);
|
|
|
|
/* dummy chip address write */
|
|
debug("i2c_read: dummy chip address write\n");
|
|
msg.condition = I2C_COND_START;
|
|
msg.acknack = I2C_ACKNAK_WAITACK;
|
|
msg.direction = I2C_WRITE;
|
|
msg.data = (chip << 1);
|
|
msg.data &= 0xFE;
|
|
if (i2c_transfer(base, &msg))
|
|
return -1;
|
|
|
|
/*
|
|
* send memory address bytes;
|
|
* alen defines how much bytes we have to send.
|
|
*/
|
|
while (--alen >= 0) {
|
|
debug("i2c_read: send address byte %02x (alen=%d)\n",
|
|
*addr, alen);
|
|
msg.condition = I2C_COND_NORMAL;
|
|
msg.acknack = I2C_ACKNAK_WAITACK;
|
|
msg.direction = I2C_WRITE;
|
|
msg.data = addr[alen];
|
|
if (i2c_transfer(base, &msg))
|
|
return -1;
|
|
}
|
|
|
|
/* start read sequence */
|
|
debug("i2c_read: start read sequence\n");
|
|
msg.condition = I2C_COND_START;
|
|
msg.acknack = I2C_ACKNAK_WAITACK;
|
|
msg.direction = I2C_WRITE;
|
|
msg.data = (chip << 1);
|
|
msg.data |= 0x01;
|
|
if (i2c_transfer(base, &msg))
|
|
return -1;
|
|
|
|
/* read bytes; send NACK at last byte */
|
|
while (len--) {
|
|
if (len == 0) {
|
|
msg.condition = I2C_COND_STOP;
|
|
msg.acknack = I2C_ACKNAK_SENDNAK;
|
|
} else {
|
|
msg.condition = I2C_COND_NORMAL;
|
|
msg.acknack = I2C_ACKNAK_SENDACK;
|
|
}
|
|
|
|
msg.direction = I2C_READ;
|
|
msg.data = 0x00;
|
|
if (i2c_transfer(base, &msg))
|
|
return -1;
|
|
|
|
*buffer = msg.data;
|
|
debug("i2c_read: reading byte (%p)=0x%02x\n",
|
|
buffer, *buffer);
|
|
buffer++;
|
|
}
|
|
|
|
i2c_reset(base);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __i2c_write(struct mv_i2c *base, uchar chip, u8 *addr, int alen,
|
|
uchar *buffer, int len)
|
|
{
|
|
struct mv_i2c_msg msg;
|
|
|
|
debug("i2c_write(chip=0x%02x, addr=0x%02x, alen=0x%02x, "
|
|
"len=0x%02x)\n", chip, *addr, alen, len);
|
|
|
|
i2c_reset(base);
|
|
|
|
/* chip address write */
|
|
debug("i2c_write: chip address write\n");
|
|
msg.condition = I2C_COND_START;
|
|
msg.acknack = I2C_ACKNAK_WAITACK;
|
|
msg.direction = I2C_WRITE;
|
|
msg.data = (chip << 1);
|
|
msg.data &= 0xFE;
|
|
if (i2c_transfer(base, &msg))
|
|
return -1;
|
|
|
|
/*
|
|
* send memory address bytes;
|
|
* alen defines how much bytes we have to send.
|
|
*/
|
|
while (--alen >= 0) {
|
|
debug("i2c_read: send address byte %02x (alen=%d)\n",
|
|
*addr, alen);
|
|
msg.condition = I2C_COND_NORMAL;
|
|
msg.acknack = I2C_ACKNAK_WAITACK;
|
|
msg.direction = I2C_WRITE;
|
|
msg.data = addr[alen];
|
|
if (i2c_transfer(base, &msg))
|
|
return -1;
|
|
}
|
|
|
|
/* write bytes; send NACK at last byte */
|
|
while (len--) {
|
|
debug("i2c_write: writing byte (%p)=0x%02x\n",
|
|
buffer, *buffer);
|
|
|
|
if (len == 0)
|
|
msg.condition = I2C_COND_STOP;
|
|
else
|
|
msg.condition = I2C_COND_NORMAL;
|
|
|
|
msg.acknack = I2C_ACKNAK_WAITACK;
|
|
msg.direction = I2C_WRITE;
|
|
msg.data = *(buffer++);
|
|
|
|
if (i2c_transfer(base, &msg))
|
|
return -1;
|
|
}
|
|
|
|
i2c_reset(base);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifndef CONFIG_DM_I2C
|
|
|
|
static struct mv_i2c *base_glob;
|
|
|
|
static void i2c_board_init(struct mv_i2c *base)
|
|
{
|
|
#ifdef CONFIG_SYS_I2C_INIT_BOARD
|
|
u32 icr;
|
|
/*
|
|
* call board specific i2c bus reset routine before accessing the
|
|
* environment, which might be in a chip on that bus. For details
|
|
* about this problem see doc/I2C_Edge_Conditions.
|
|
*
|
|
* disable I2C controller first, otherwhise it thinks we want to
|
|
* talk to the slave port...
|
|
*/
|
|
icr = readl(&base->icr);
|
|
writel(readl(&base->icr) & ~(ICR_SCLE | ICR_IUE), &base->icr);
|
|
|
|
i2c_init_board();
|
|
|
|
writel(icr, &base->icr);
|
|
#endif
|
|
}
|
|
|
|
#ifdef CONFIG_I2C_MULTI_BUS
|
|
static unsigned long i2c_regs[CONFIG_MV_I2C_NUM] = CONFIG_MV_I2C_REG;
|
|
static unsigned int bus_initialized[CONFIG_MV_I2C_NUM];
|
|
static unsigned int current_bus;
|
|
|
|
int i2c_set_bus_num(unsigned int bus)
|
|
{
|
|
if ((bus < 0) || (bus >= CONFIG_MV_I2C_NUM)) {
|
|
printf("Bad bus: %d\n", bus);
|
|
return -1;
|
|
}
|
|
|
|
base_glob = (struct mv_i2c *)i2c_regs[bus];
|
|
current_bus = bus;
|
|
|
|
if (!bus_initialized[current_bus]) {
|
|
i2c_board_init(base_glob);
|
|
bus_initialized[current_bus] = 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
unsigned int i2c_get_bus_num(void)
|
|
{
|
|
return current_bus;
|
|
}
|
|
#endif
|
|
|
|
/* API Functions */
|
|
void i2c_init(int speed, int slaveaddr)
|
|
{
|
|
u32 val;
|
|
|
|
#ifdef CONFIG_I2C_MULTI_BUS
|
|
current_bus = 0;
|
|
base_glob = (struct mv_i2c *)i2c_regs[current_bus];
|
|
#else
|
|
base_glob = (struct mv_i2c *)CONFIG_MV_I2C_REG;
|
|
#endif
|
|
|
|
if (speed > 100000)
|
|
val = ICR_FM;
|
|
else
|
|
val = ICR_SM;
|
|
clrsetbits_le32(&base_glob->icr, ICR_MODE_MASK, val);
|
|
|
|
i2c_board_init(base_glob);
|
|
}
|
|
|
|
static int __i2c_probe_chip(struct mv_i2c *base, uchar chip)
|
|
{
|
|
struct mv_i2c_msg msg;
|
|
|
|
i2c_reset(base);
|
|
|
|
msg.condition = I2C_COND_START;
|
|
msg.acknack = I2C_ACKNAK_WAITACK;
|
|
msg.direction = I2C_WRITE;
|
|
msg.data = (chip << 1) + 1;
|
|
if (i2c_transfer(base, &msg))
|
|
return -1;
|
|
|
|
msg.condition = I2C_COND_STOP;
|
|
msg.acknack = I2C_ACKNAK_SENDNAK;
|
|
msg.direction = I2C_READ;
|
|
msg.data = 0x00;
|
|
if (i2c_transfer(base, &msg))
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* i2c_probe: - Test if a chip answers for a given i2c address
|
|
*
|
|
* @chip: address of the chip which is searched for
|
|
* @return: 0 if a chip was found, -1 otherwhise
|
|
*/
|
|
int i2c_probe(uchar chip)
|
|
{
|
|
return __i2c_probe_chip(base_glob, chip);
|
|
}
|
|
|
|
/*
|
|
* i2c_read: - Read multiple bytes from an i2c device
|
|
*
|
|
* The higher level routines take into account that this function is only
|
|
* called with len < page length of the device (see configuration file)
|
|
*
|
|
* @chip: address of the chip which is to be read
|
|
* @addr: i2c data address within the chip
|
|
* @alen: length of the i2c data address (1..2 bytes)
|
|
* @buffer: where to write the data
|
|
* @len: how much byte do we want to read
|
|
* @return: 0 in case of success
|
|
*/
|
|
int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
|
|
{
|
|
u8 addr_bytes[4];
|
|
|
|
addr_bytes[0] = (addr >> 0) & 0xFF;
|
|
addr_bytes[1] = (addr >> 8) & 0xFF;
|
|
addr_bytes[2] = (addr >> 16) & 0xFF;
|
|
addr_bytes[3] = (addr >> 24) & 0xFF;
|
|
|
|
return __i2c_read(base_glob, chip, addr_bytes, alen, buffer, len);
|
|
}
|
|
|
|
/*
|
|
* i2c_write: - Write multiple bytes to an i2c device
|
|
*
|
|
* The higher level routines take into account that this function is only
|
|
* called with len < page length of the device (see configuration file)
|
|
*
|
|
* @chip: address of the chip which is to be written
|
|
* @addr: i2c data address within the chip
|
|
* @alen: length of the i2c data address (1..2 bytes)
|
|
* @buffer: where to find the data to be written
|
|
* @len: how much byte do we want to read
|
|
* @return: 0 in case of success
|
|
*/
|
|
int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
|
|
{
|
|
u8 addr_bytes[4];
|
|
|
|
addr_bytes[0] = (addr >> 0) & 0xFF;
|
|
addr_bytes[1] = (addr >> 8) & 0xFF;
|
|
addr_bytes[2] = (addr >> 16) & 0xFF;
|
|
addr_bytes[3] = (addr >> 24) & 0xFF;
|
|
|
|
return __i2c_write(base_glob, chip, addr_bytes, alen, buffer, len);
|
|
}
|
|
|
|
#else /* CONFIG_DM_I2C */
|
|
|
|
struct mv_i2c_priv {
|
|
struct mv_i2c *base;
|
|
};
|
|
|
|
static int mv_i2c_xfer(struct udevice *bus, struct i2c_msg *msg, int nmsgs)
|
|
{
|
|
struct mv_i2c_priv *i2c = dev_get_priv(bus);
|
|
struct i2c_msg *dmsg, *omsg, dummy;
|
|
|
|
memset(&dummy, 0, sizeof(struct i2c_msg));
|
|
|
|
/*
|
|
* We expect either two messages (one with an offset and one with the
|
|
* actual data) or one message (just data or offset/data combined)
|
|
*/
|
|
if (nmsgs > 2 || nmsgs == 0) {
|
|
debug("%s: Only one or two messages are supported.", __func__);
|
|
return -1;
|
|
}
|
|
|
|
omsg = nmsgs == 1 ? &dummy : msg;
|
|
dmsg = nmsgs == 1 ? msg : msg + 1;
|
|
|
|
if (dmsg->flags & I2C_M_RD)
|
|
return __i2c_read(i2c->base, dmsg->addr, omsg->buf,
|
|
omsg->len, dmsg->buf, dmsg->len);
|
|
else
|
|
return __i2c_write(i2c->base, dmsg->addr, omsg->buf,
|
|
omsg->len, dmsg->buf, dmsg->len);
|
|
}
|
|
|
|
static int mv_i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
|
|
{
|
|
struct mv_i2c_priv *priv = dev_get_priv(bus);
|
|
u32 val;
|
|
|
|
if (speed > 100000)
|
|
val = ICR_FM;
|
|
else
|
|
val = ICR_SM;
|
|
clrsetbits_le32(&priv->base->icr, ICR_MODE_MASK, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mv_i2c_probe(struct udevice *bus)
|
|
{
|
|
struct mv_i2c_priv *priv = dev_get_priv(bus);
|
|
|
|
priv->base = (void *)devfdt_get_addr_ptr(bus);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_i2c_ops mv_i2c_ops = {
|
|
.xfer = mv_i2c_xfer,
|
|
.set_bus_speed = mv_i2c_set_bus_speed,
|
|
};
|
|
|
|
static const struct udevice_id mv_i2c_ids[] = {
|
|
{ .compatible = "marvell,armada-3700-i2c" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(i2c_mv) = {
|
|
.name = "i2c_mv",
|
|
.id = UCLASS_I2C,
|
|
.of_match = mv_i2c_ids,
|
|
.probe = mv_i2c_probe,
|
|
.priv_auto_alloc_size = sizeof(struct mv_i2c_priv),
|
|
.ops = &mv_i2c_ops,
|
|
};
|
|
#endif /* CONFIG_DM_I2C */
|