u-boot/arch/mips/dts/mt7628a.dtsi
Stefan Roese fdd1a9ff78 mips: mt7628a.dtsi: Add SPI clock-frequency property
This patch adds the clock-frequency property to the SPI controller
DT node. It will be used by the SPI driver to calculate the baud rate.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-09-23 14:27:51 +02:00

144 lines
2.5 KiB
Text

// SPDX-License-Identifier: GPL-2.0
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "ralink,mt7628a-soc";
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "mti,mips24KEc";
device_type = "cpu";
reg = <0>;
};
};
resetc: reset-controller {
compatible = "ralink,rt2880-reset";
#reset-cells = <1>;
};
cpuintc: interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
interrupt-controller;
compatible = "mti,cpu-interrupt-controller";
};
palmbus@10000000 {
compatible = "palmbus", "simple-bus";
reg = <0x10000000 0x200000>;
ranges = <0x0 0x10000000 0x1FFFFF>;
#address-cells = <1>;
#size-cells = <1>;
sysc: system-controller@0 {
compatible = "ralink,mt7620a-sysc", "syscon";
reg = <0x0 0x100>;
};
syscon-reboot {
compatible = "syscon-reboot";
regmap = <&sysc>;
offset = <0x34>;
mask = <0x1>;
};
intc: interrupt-controller@200 {
compatible = "ralink,rt2880-intc";
reg = <0x200 0x100>;
interrupt-controller;
#interrupt-cells = <1>;
resets = <&resetc 9>;
reset-names = "intc";
interrupt-parent = <&cpuintc>;
interrupts = <2>;
ralink,intc-registers = <0x9c 0xa0
0x6c 0xa4
0x80 0x78>;
};
memory-controller@300 {
compatible = "ralink,mt7620a-memc";
reg = <0x300 0x100>;
};
spi0: spi@b00 {
compatible = "ralink,mt7621-spi";
reg = <0xb00 0x40>;
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <200000000>;
};
uart0: uartlite@c00 {
compatible = "ns16550a";
reg = <0xc00 0x100>;
resets = <&resetc 12>;
reset-names = "uart0";
interrupt-parent = <&intc>;
interrupts = <20>;
reg-shift = <2>;
};
uart1: uart1@d00 {
compatible = "ns16550a";
reg = <0xd00 0x100>;
resets = <&resetc 19>;
reset-names = "uart1";
interrupt-parent = <&intc>;
interrupts = <21>;
reg-shift = <2>;
};
uart2: uart2@e00 {
compatible = "ns16550a";
reg = <0xe00 0x100>;
resets = <&resetc 20>;
reset-names = "uart2";
interrupt-parent = <&intc>;
interrupts = <22>;
reg-shift = <2>;
};
};
usb_phy: usb-phy@10120000 {
compatible = "mediatek,mt7628-usbphy";
reg = <0x10120000 0x1000>;
#phy-cells = <0>;
ralink,sysctl = <&sysc>;
resets = <&resetc 22 &resetc 25>;
reset-names = "host", "device";
};
ehci@101c0000 {
compatible = "generic-ehci";
reg = <0x101c0000 0x1000>;
phys = <&usb_phy>;
phy-names = "usb";
interrupt-parent = <&intc>;
interrupts = <18>;
};
};