u-boot/arch/powerpc/cpu/mpc512x/pci.c
Wolfgang Denk 1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00

209 lines
5.2 KiB
C

/*
* Copyright (C) 2009-2010 DENX Software Engineering <wd@denx.de>
* Copyright (C) Freescale Semiconductor, Inc. 2006, 2007.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <asm/mmu.h>
#include <asm/global_data.h>
#include <pci.h>
#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
#include <fdt_support.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
/* System RAM mapped to PCI space */
#define CONFIG_PCI_SYS_MEM_BUS CONFIG_SYS_SDRAM_BASE
#define CONFIG_PCI_SYS_MEM_PHYS CONFIG_SYS_SDRAM_BASE
static struct pci_controller pci_hose;
/**************************************************************************
* pci_init_board()
*
*/
void
pci_init_board(void)
{
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
volatile law512x_t *pci_law;
volatile pot512x_t *pci_pot;
volatile pcictrl512x_t *pci_ctrl;
u16 reg16;
u32 reg32;
u32 dev;
int i;
struct pci_controller *hose;
/* Set PCI divider for 33MHz */
reg32 = in_be32(&im->clk.scfr[0]);
reg32 &= ~(SCFR1_PCI_DIV_MASK);
reg32 |= SCFR1_PCI_DIV << SCFR1_PCI_DIV_SHIFT;
out_be32(&im->clk.scfr[0], reg32);
clrsetbits_be32(&im->clk.scfr[0],
SCFR1_PCI_DIV_MASK,
SCFR1_PCI_DIV << SCFR1_PCI_DIV_SHIFT
);
pci_law = im->sysconf.pcilaw;
pci_pot = im->ios.pot;
pci_ctrl = &im->pci_ctrl;
hose = &pci_hose;
/*
* Release PCI RST Output signal
*/
out_be32(&pci_ctrl->gcr, 0);
udelay(2000);
out_be32(&pci_ctrl->gcr, 1);
/* We need to wait at least a 1sec based on PCI specs */
for (i = 0; i < 1000; i++)
udelay(1000);
/*
* Configure PCI Local Access Windows
*/
out_be32(&pci_law[0].bar, CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR);
out_be32(&pci_law[0].ar, LAWAR_EN | LAWAR_SIZE_512M);
out_be32(&pci_law[1].bar, CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR);
out_be32(&pci_law[1].ar, LAWAR_EN | LAWAR_SIZE_16M);
/*
* Configure PCI Outbound Translation Windows
*/
/* PCI mem space - prefetch */
out_be32(&pci_pot[0].potar,
(CONFIG_SYS_PCI_MEM_BASE >> 12) & POTAR_TA_MASK);
out_be32(&pci_pot[0].pobar,
(CONFIG_SYS_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK);
out_be32(&pci_pot[0].pocmr,
POCMR_EN | POCMR_PRE | POCMR_CM_256M);
/* PCI IO space */
out_be32(&pci_pot[1].potar,
(CONFIG_SYS_PCI_IO_BASE >> 12) & POTAR_TA_MASK);
out_be32(&pci_pot[1].pobar,
(CONFIG_SYS_PCI_IO_PHYS >> 12) & POBAR_BA_MASK);
out_be32(&pci_pot[1].pocmr,
POCMR_EN | POCMR_IO | POCMR_CM_16M);
/* PCI mmio - non-prefetch mem space */
out_be32(&pci_pot[2].potar,
(CONFIG_SYS_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK);
out_be32(&pci_pot[2].pobar,
(CONFIG_SYS_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK);
out_be32(&pci_pot[2].pocmr,
POCMR_EN | POCMR_CM_256M);
/*
* Configure PCI Inbound Translation Windows
*/
/* we need RAM mapped to PCI space for the devices to
* access main memory */
out_be32(&pci_ctrl[0].pitar1, 0x0);
out_be32(&pci_ctrl[0].pibar1, 0x0);
out_be32(&pci_ctrl[0].piebar1, 0x0);
out_be32(&pci_ctrl[0].piwar1,
PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP |
PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1));
hose->first_busno = 0;
hose->last_busno = 0xff;
/* PCI memory prefetch space */
pci_set_region(hose->regions + 0,
CONFIG_SYS_PCI_MEM_BASE,
CONFIG_SYS_PCI_MEM_PHYS,
CONFIG_SYS_PCI_MEM_SIZE,
PCI_REGION_MEM|PCI_REGION_PREFETCH);
/* PCI memory space */
pci_set_region(hose->regions + 1,
CONFIG_SYS_PCI_MMIO_BASE,
CONFIG_SYS_PCI_MMIO_PHYS,
CONFIG_SYS_PCI_MMIO_SIZE,
PCI_REGION_MEM);
/* PCI IO space */
pci_set_region(hose->regions + 2,
CONFIG_SYS_PCI_IO_BASE,
CONFIG_SYS_PCI_IO_PHYS,
CONFIG_SYS_PCI_IO_SIZE,
PCI_REGION_IO);
/* System memory space */
pci_set_region(hose->regions + 3,
CONFIG_PCI_SYS_MEM_BUS,
CONFIG_PCI_SYS_MEM_PHYS,
gd->ram_size,
PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
hose->region_count = 4;
pci_setup_indirect(hose,
(CONFIG_SYS_IMMR + 0x8300),
(CONFIG_SYS_IMMR + 0x8304));
pci_register_hose(hose);
/*
* Write to Command register
*/
reg16 = 0xff;
dev = PCI_BDF(hose->first_busno, 0, 0);
pci_hose_read_config_word(hose, dev, PCI_COMMAND, &reg16);
reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
/*
* Clear non-reserved bits in status register.
*/
pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
#ifdef CONFIG_PCI_SCAN_SHOW
printf("PCI: Bus Dev VenId DevId Class Int\n");
#endif
/*
* Hose scan.
*/
hose->last_busno = pci_hose_scan(hose);
}
#if defined(CONFIG_OF_LIBFDT)
void ft_pci_setup(void *blob, bd_t *bd)
{
int nodeoffset;
int tmp[2];
const char *path;
nodeoffset = fdt_path_offset(blob, "/aliases");
if (nodeoffset >= 0) {
path = fdt_getprop(blob, nodeoffset, "pci", NULL);
if (path) {
tmp[0] = cpu_to_be32(pci_hose.first_busno);
tmp[1] = cpu_to_be32(pci_hose.last_busno);
do_fixup_by_path(blob, path, "bus-range",
&tmp, sizeof(tmp), 1);
tmp[0] = cpu_to_be32(gd->pci_clk);
do_fixup_by_path(blob, path, "clock-frequency",
&tmp, sizeof(tmp[0]), 1);
}
}
}
#endif /* CONFIG_OF_LIBFDT */