u-boot/board/mvblue/mvblue.c
Becky Bruce 9973e3c614 Change initdram() return type to phys_size_t
This patch changes the return type of initdram() from long int to phys_size_t.
This is required for a couple of reasons: long int limits the amount of dram
to 2GB, and u-boot in general is moving over to phys_size_t to represent the
size of physical memory.  phys_size_t is defined as an unsigned long on almost
all current platforms.

This patch *only* changes the return type of the initdram function (in
include/common.h, as well as in each board's implementation of initdram).  It
does not actually modify the code inside the function on any of the platforms;
platforms which wish to support more than 2GB of DRAM will need to modify
their initdram() function code.

Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc
MPC8641HPCN.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-06-12 08:50:18 +02:00

248 lines
5.6 KiB
C

/*
* GNU General Public License for more details.
*
* MATRIX Vision GmbH / June 2002-Nov 2003
* Andre Schwarz
*/
#include <common.h>
#include <mpc824x.h>
#include <asm/io.h>
#include <ns16550.h>
#ifdef CONFIG_PCI
#include <pci.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
u32 get_BoardType (void);
#define PCI_CONFIG(b,d,f,r) cpu_to_le32(0x80000000 | ((b&0xff)<<16) \
| ((d&0x1f)<<11) \
| ((f&0x7)<<7) \
| (r&0xfc) )
int mv_pci_read (int bus, int dev, int func, int reg)
{
*(u32 *) (0xfec00cf8) = PCI_CONFIG (bus, dev, func, reg);
asm ("sync");
return cpu_to_le32 (*(u32 *) (0xfee00cfc));
}
u32 get_BoardType ()
{
return (mv_pci_read (0, 0xe, 0, 0) == 0x06801095 ? 0 : 1);
}
void init_2nd_DUART (void)
{
NS16550_t console = (NS16550_t) CFG_NS16550_COM2;
int clock_divisor = CFG_NS16550_CLK / 16 / CONFIG_BAUDRATE;
*(u8 *) (0xfc004511) = 0x1;
NS16550_init (console, clock_divisor);
}
void hw_watchdog_reset (void)
{
if (get_BoardType () == 0) {
*(u32 *) (0xff000005) = 0;
asm ("sync");
}
}
int checkboard (void)
{
ulong busfreq = get_bus_freq (0);
char buf[32];
u32 BoardType = get_BoardType ();
char *BoardName[2] = { "mvBlueBOX", "mvBlueLYNX" };
char *p;
bd_t *bd = gd->bd;
hw_watchdog_reset ();
printf ("U-Boot (%s) running on mvBLUE device.\n", MV_VERSION);
printf (" Found %s running at %s MHz memory clock.\n",
BoardName[BoardType], strmhz (buf, busfreq));
init_2nd_DUART ();
if ((p = getenv ("console_nr")) != NULL) {
unsigned long con_nr = simple_strtoul (p, NULL, 10) & 3;
bd->bi_baudrate &= ~3;
bd->bi_baudrate |= con_nr & 3;
}
return 0;
}
phys_size_t initdram (int board_type)
{
long size;
long new_bank0_end;
long mear1;
long emear1;
size = get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE);
new_bank0_end = size - 1;
mear1 = mpc824x_mpc107_getreg(MEAR1);
emear1 = mpc824x_mpc107_getreg(EMEAR1);
mear1 = (mear1 & 0xFFFFFF00) |
((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT);
emear1 = (emear1 & 0xFFFFFF00) |
((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT);
mpc824x_mpc107_setreg(MEAR1, mear1);
mpc824x_mpc107_setreg(EMEAR1, emear1);
return (size);
}
/* ------------------------------------------------------------------------- */
u8 *dhcp_vendorex_prep (u8 * e)
{
char *ptr;
/* DHCP vendor-class-identifier = 60 */
if ((ptr = getenv ("dhcp_vendor-class-identifier"))) {
*e++ = 60;
*e++ = strlen (ptr);
while (*ptr)
*e++ = *ptr++;
}
/* my DHCP_CLIENT_IDENTIFIER = 61 */
if ((ptr = getenv ("dhcp_client_id"))) {
*e++ = 61;
*e++ = strlen (ptr);
while (*ptr)
*e++ = *ptr++;
}
return e;
}
u8 *dhcp_vendorex_proc (u8 * popt)
{
return NULL;
}
/* ------------------------------------------------------------------------- */
/*
* Initialize PCI Devices
*/
#ifdef CONFIG_PCI
void pci_mvblue_clear_base (struct pci_controller *hose, pci_dev_t dev)
{
u32 cnt;
printf ("clear base @ dev/func 0x%02x/0x%02x ... ", PCI_DEV (dev),
PCI_FUNC (dev));
for (cnt = 0; cnt < 6; cnt++)
pci_hose_write_config_dword (hose, dev, 0x10 + (4 * cnt),
0x0);
printf ("done\n");
}
void duart_setup (u32 base, u16 divisor)
{
printf ("duart setup ...");
out_8 ((u8 *) (CFG_ISA_IO + base + 3), 0x80);
out_8 ((u8 *) (CFG_ISA_IO + base + 0), divisor & 0xff);
out_8 ((u8 *) (CFG_ISA_IO + base + 1), divisor >> 8);
out_8 ((u8 *) (CFG_ISA_IO + base + 3), 0x03);
out_8 ((u8 *) (CFG_ISA_IO + base + 4), 0x03);
out_8 ((u8 *) (CFG_ISA_IO + base + 2), 0x07);
printf ("done\n");
}
void pci_mvblue_fixup_irq_behind_bridge (struct pci_controller *hose,
pci_dev_t bridge, unsigned char irq)
{
pci_dev_t d;
unsigned char bus;
unsigned short vendor, class;
pci_hose_read_config_byte (hose, bridge, PCI_SECONDARY_BUS, &bus);
for (d = PCI_BDF (bus, 0, 0);
d < PCI_BDF (bus, PCI_MAX_PCI_DEVICES - 1,
PCI_MAX_PCI_FUNCTIONS - 1);
d += PCI_BDF (0, 0, 1)) {
pci_hose_read_config_word (hose, d, PCI_VENDOR_ID, &vendor);
if (vendor != 0xffff && vendor != 0x0000) {
pci_hose_read_config_word (hose, d, PCI_CLASS_DEVICE,
&class);
if (class == PCI_CLASS_BRIDGE_PCI)
pci_mvblue_fixup_irq_behind_bridge (hose, d,
irq);
else
pci_hose_write_config_byte (hose, d,
PCI_INTERRUPT_LINE,
irq);
}
}
}
#define MV_MAX_PCI_BUSSES 3
#define SLOT0_IRQ 3
#define SLOT1_IRQ 4
void pci_mvblue_fixup_irq (struct pci_controller *hose, pci_dev_t dev)
{
unsigned char line = 0xff;
unsigned short class;
if (PCI_BUS (dev) == 0) {
switch (PCI_DEV (dev)) {
case 0xd:
if (get_BoardType () == 0) {
line = 1;
} else
/* mvBL */
line = 2;
break;
case 0xe:
/* mvBB: IDE */
line = 2;
pci_hose_write_config_byte (hose, dev, 0x8a, 0x20);
break;
case 0xf:
/* mvBB: Slot0 (Grabber) */
pci_hose_read_config_word (hose, dev,
PCI_CLASS_DEVICE, &class);
if (class == PCI_CLASS_BRIDGE_PCI) {
pci_mvblue_fixup_irq_behind_bridge (hose, dev,
SLOT0_IRQ);
line = 0xff;
} else
line = SLOT0_IRQ;
break;
case 0x10:
/* mvBB: Slot1 */
pci_hose_read_config_word (hose, dev,
PCI_CLASS_DEVICE, &class);
if (class == PCI_CLASS_BRIDGE_PCI) {
pci_mvblue_fixup_irq_behind_bridge (hose, dev,
SLOT1_IRQ);
line = 0xff;
} else
line = SLOT1_IRQ;
break;
default:
printf ("***pci_scan: illegal dev = 0x%08x\n",
PCI_DEV (dev));
line = 0xff;
break;
}
pci_hose_write_config_byte (hose, dev, PCI_INTERRUPT_LINE,
line);
}
}
struct pci_controller hose = {
fixup_irq:pci_mvblue_fixup_irq
};
void pci_init_board (void)
{
pci_mpc824x_init (&hose);
}
#endif