mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-05 20:54:31 +00:00
a09fea1d28
- In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
180 lines
4.5 KiB
C
180 lines
4.5 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Toradex Colibri PXA270 configuration file
|
|
*
|
|
* Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
|
|
* Copyright (C) 2015-2016 Marcel Ziswiler <marcel@ziswiler.com>
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* High Level Board Configuration Options
|
|
*/
|
|
#define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */
|
|
/* Avoid overwriting factory configuration block */
|
|
#define CONFIG_BOARD_SIZE_LIMIT 0x40000
|
|
|
|
/*
|
|
* Environment settings
|
|
*/
|
|
#define CONFIG_ENV_OVERWRITE
|
|
#define CONFIG_SYS_MALLOC_LEN (128 * 1024)
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"if fatload mmc 0 0xa0000000 uImage; then " \
|
|
"bootm 0xa0000000; " \
|
|
"fi; " \
|
|
"if usb reset && fatload usb 0 0xa0000000 uImage; then " \
|
|
"bootm 0xa0000000; " \
|
|
"fi; " \
|
|
"bootm 0xc0000;"
|
|
#define CONFIG_TIMESTAMP
|
|
#define CONFIG_CMDLINE_TAG
|
|
#define CONFIG_SETUP_MEMORY_TAGS
|
|
|
|
/*
|
|
* Serial Console Configuration
|
|
*/
|
|
|
|
/*
|
|
* Bootloader Components Configuration
|
|
*/
|
|
|
|
/* I2C support */
|
|
#ifdef CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_PXA
|
|
#define CONFIG_PXA_STD_I2C
|
|
#define CONFIG_PXA_PWR_I2C
|
|
#define CONFIG_SYS_I2C_SPEED 100000
|
|
#endif
|
|
|
|
/* LCD support */
|
|
#ifdef CONFIG_LCD
|
|
#define CONFIG_PXA_LCD
|
|
#define CONFIG_PXA_VGA
|
|
#define CONFIG_LCD_LOGO
|
|
#endif
|
|
|
|
/*
|
|
* Networking Configuration
|
|
*/
|
|
#ifdef CONFIG_CMD_NET
|
|
|
|
#define CONFIG_DRIVER_DM9000 1
|
|
#define CONFIG_DM9000_BASE 0x08000000
|
|
#define DM9000_IO (CONFIG_DM9000_BASE)
|
|
#define DM9000_DATA (CONFIG_DM9000_BASE + 4)
|
|
#define CONFIG_NET_RETRY_COUNT 10
|
|
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#endif
|
|
|
|
#define CONFIG_SYS_DEVICE_NULLDEV 1
|
|
|
|
/*
|
|
* Clock Configuration
|
|
*/
|
|
#define CONFIG_SYS_CPUSPEED 0x290 /* 520MHz */
|
|
|
|
/*
|
|
* DRAM Map
|
|
*/
|
|
#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
|
|
#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
|
|
|
|
#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */
|
|
#define CONFIG_SYS_DRAM_SIZE 0x04000000 /* 64 MB DRAM */
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
|
|
#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM_1
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
|
|
#define CONFIG_SYS_INIT_SP_ADDR 0x5c010000
|
|
|
|
/*
|
|
* NOR FLASH
|
|
*/
|
|
#ifdef CONFIG_CMD_FLASH
|
|
#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
|
|
#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */
|
|
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
|
|
|
|
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_32BIT
|
|
|
|
#define CONFIG_SYS_MAX_FLASH_SECT (4 + 255)
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
|
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT (25 * CONFIG_SYS_HZ)
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT (25 * CONFIG_SYS_HZ)
|
|
#define CONFIG_SYS_FLASH_LOCK_TOUT (25 * CONFIG_SYS_HZ)
|
|
#define CONFIG_SYS_FLASH_UNLOCK_TOUT (25 * CONFIG_SYS_HZ)
|
|
#endif
|
|
|
|
#define CONFIG_SYS_MONITOR_BASE 0x0
|
|
#define CONFIG_SYS_MONITOR_LEN 0x40000
|
|
|
|
/* Skip factory configuration block */
|
|
|
|
/*
|
|
* GPIO settings
|
|
*/
|
|
#define CONFIG_SYS_GPSR0_VAL 0x00000000
|
|
#define CONFIG_SYS_GPSR1_VAL 0x00020000
|
|
#define CONFIG_SYS_GPSR2_VAL 0x0002c000
|
|
#define CONFIG_SYS_GPSR3_VAL 0x00000000
|
|
|
|
#define CONFIG_SYS_GPCR0_VAL 0x00000000
|
|
#define CONFIG_SYS_GPCR1_VAL 0x00000000
|
|
#define CONFIG_SYS_GPCR2_VAL 0x00000000
|
|
#define CONFIG_SYS_GPCR3_VAL 0x00000000
|
|
|
|
#define CONFIG_SYS_GPDR0_VAL 0xc8008000
|
|
#define CONFIG_SYS_GPDR1_VAL 0xfc02a981
|
|
#define CONFIG_SYS_GPDR2_VAL 0x92c3ffff
|
|
#define CONFIG_SYS_GPDR3_VAL 0x0061e804
|
|
|
|
#define CONFIG_SYS_GAFR0_L_VAL 0x80100000
|
|
#define CONFIG_SYS_GAFR0_U_VAL 0xa5c00010
|
|
#define CONFIG_SYS_GAFR1_L_VAL 0x6992901a
|
|
#define CONFIG_SYS_GAFR1_U_VAL 0xaaa50008
|
|
#define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa
|
|
#define CONFIG_SYS_GAFR2_U_VAL 0x4109a002
|
|
#define CONFIG_SYS_GAFR3_L_VAL 0x54000310
|
|
#define CONFIG_SYS_GAFR3_U_VAL 0x00005401
|
|
|
|
#define CONFIG_SYS_PSSR_VAL 0x30
|
|
|
|
/*
|
|
* Clock settings
|
|
*/
|
|
#define CONFIG_SYS_CKEN 0x00500240
|
|
#define CONFIG_SYS_CCCR 0x02000290
|
|
|
|
/*
|
|
* Memory settings
|
|
*/
|
|
#define CONFIG_SYS_MSC0_VAL 0x9ee1c5f2
|
|
#define CONFIG_SYS_MSC1_VAL 0x9ee1f994
|
|
#define CONFIG_SYS_MSC2_VAL 0x9ee19ee1
|
|
#define CONFIG_SYS_MDCNFG_VAL 0x090009c9
|
|
#define CONFIG_SYS_MDREFR_VAL 0x2003a031
|
|
#define CONFIG_SYS_MDMRS_VAL 0x00220022
|
|
#define CONFIG_SYS_FLYCNFG_VAL 0x00010001
|
|
#define CONFIG_SYS_SXCNFG_VAL 0x40044004
|
|
|
|
/*
|
|
* PCMCIA and CF Interfaces
|
|
*/
|
|
#define CONFIG_SYS_MECR_VAL 0x00000000
|
|
#define CONFIG_SYS_MCMEM0_VAL 0x00028307
|
|
#define CONFIG_SYS_MCMEM1_VAL 0x00014307
|
|
#define CONFIG_SYS_MCATT0_VAL 0x00038787
|
|
#define CONFIG_SYS_MCATT1_VAL 0x0001c787
|
|
#define CONFIG_SYS_MCIO0_VAL 0x0002830f
|
|
#define CONFIG_SYS_MCIO1_VAL 0x0001430f
|
|
|
|
#include "pxa-common.h"
|
|
|
|
#endif /* __CONFIG_H */
|